Index: alsa-default/alsa-kernel/include/emu10k1.h
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/include/emu10k1.h,v
retrieving revision 1.53
diff -u -r1.53 emu10k1.h
--- alsa-default/alsa-kernel/include/emu10k1.h	22 Nov 2004 18:42:01 -0000	1.53
+++ alsa-default/alsa-kernel/include/emu10k1.h	2 Feb 2005 02:16:42 -0000
@@ -1112,7 +1112,10 @@
 /* GPRs */
 #define FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x0f */
 #define EXTIN(x)	(0x10 + (x))	/* x = 0x00 - 0x0f */
-#define EXTOUT(x)	(0x20 + (x))	/* x = 0x00 - 0x0f */
+#define EXTOUT(x)	(0x20 + (x))	/* x = 0x00 - 0x0f physical outs -> FXWC low 16 bits */
+#define FXBUS2(x)	(0x30 + (x))	/* x = 0x00 - 0x0f copies of fx buses for capture -> FXWC high 16 bits */
+					/* NB: 0x31 and 0x32 are shared with Center/LFE on SB live 5.1 */
+
 #define C_00000000	0x40
 #define C_00000001	0x41
 #define C_00000002	0x42
@@ -1154,9 +1157,13 @@
 #define A_ITRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0x00 + (x)) /* x = 0x00 - 0xbf */
 #define A_ETRAM_CTL(x)	(A_TANKMEMCTLREGBASE + 0xc0 + (x)) /* x = 0x00 - 0x3f */
 
-#define A_FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x3f? */
-#define A_EXTIN(x)	(0x40 + (x))	/* x = 0x00 - 0x1f? */
-#define A_EXTOUT(x)	(0x60 + (x))	/* x = 0x00 - 0x1f? */
+#define A_FXBUS(x)	(0x00 + (x))	/* x = 0x00 - 0x3f FX buses */
+#define A_EXTIN(x)	(0x40 + (x))	/* x = 0x00 - 0x0f physical ins */
+#define A_P16VIN(x)	(0x50 + (x))	/* x = 0x00 - 0x0f p16v ins (A2 only) "EMU32 inputs" */
+#define A_EXTOUT(x)	(0x60 + (x))	/* x = 0x00 - 0x1f physical outs -> A_FXWC1 0x79-7f unknown   */
+#define A_FXBUS2(x)	(0x80 + (x))	/* x = 0x00 - 0x1f extra outs used for EFX capture -> A_FXWC2 */
+#define A_EMU32OUTH(x)	(0xa0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_10 - _1F" - ??? */
+#define A_EMU32OUTL(x)	(0xb0 + (x))	/* x = 0x00 - 0x0f "EMU32_OUT_1 - _F" - ??? */
 #define A_GPR(x)	(A_FXGPREGBASE + (x))
 
 /* cc_reg constants */
Index: alsa-default/alsa-kernel/pci/emu10k1/emufx.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emufx.c,v
retrieving revision 1.67
diff -u -r1.67 emufx.c
--- alsa-default/alsa-kernel/pci/emu10k1/emufx.c	28 Jan 2005 15:33:10 -0000	1.67
+++ alsa-default/alsa-kernel/pci/emu10k1/emufx.c	2 Feb 2005 02:16:45 -0000
@@ -1358,6 +1358,11 @@
 	A_PUT_OUTPUT(A_EXTOUT_ADC_CAP_R, capture+1);
 #endif
 
+	/* EFX capture - capture the 16 EXTINs */
+	for (z = 0; z < 16; z++) {
+		A_OP(icode, &ptr, iACC3, A_FXBUS2(z), A_C_00000000, A_C_00000000, A_EXTIN(z));
+	}
+	
 	/*
 	 * ok, set up done..
 	 */
@@ -1930,6 +1935,24 @@
 	if (emu->fx8010.extout_mask & (1<<EXTOUT_MIC_CAP))
 		OP(icode, &ptr, iACC3, EXTOUT(EXTOUT_MIC_CAP), GPR(capture + 2), C_00000000, C_00000000);
 
+	/* EFX capture - capture the 16 EXTINS */
+	OP(icode, &ptr, iACC3, FXBUS2(14), C_00000000, C_00000000, EXTIN(0));
+	OP(icode, &ptr, iACC3, FXBUS2(15), C_00000000, C_00000000, EXTIN(1));
+	OP(icode, &ptr, iACC3, FXBUS2(0), C_00000000, C_00000000, EXTIN(2));
+	OP(icode, &ptr, iACC3, FXBUS2(3), C_00000000, C_00000000, EXTIN(3));
+	/* Dont connect anything to FXBUS2 1 and 2.  These are shared with 
+	 * Center/LFE on the SBLive 5.1.  The kX driver only changes the 
+	 * routing when it detects an SBLive 5.1.
+	 *
+	 * Since only 14 of the 16 EXTINs are used, this is not a big problem.  
+	 * We route AC97L and R to FX capture 14 and 15, SPDIF CD in to FX capture 
+	 * 0 and 3, then the rest of the EXTINs to the corresponding FX capture 
+	 * channel.
+	 */
+	for (z = 4; z < 14; z++) {
+		OP(icode, &ptr, iACC3, FXBUS2(z), C_00000000, C_00000000, EXTIN(z));
+	}
+
 	if (gpr > tmp) {
 		snd_BUG();
 		err = -EIO;
Index: alsa-default/alsa-kernel/pci/emu10k1/emupcm.c
===================================================================
RCS file: /cvsroot/alsa/alsa-kernel/pci/emu10k1/emupcm.c,v
retrieving revision 1.35
diff -u -r1.35 emupcm.c
--- alsa-default/alsa-kernel/pci/emu10k1/emupcm.c	29 Nov 2004 14:09:47 -0000	1.35
+++ alsa-default/alsa-kernel/pci/emu10k1/emupcm.c	2 Feb 2005 02:16:46 -0000
@@ -1390,8 +1390,18 @@
 	if (rpcm)
 		*rpcm = pcm;
 
-	emu->efx_voices_mask[0] = FXWC_DEFAULTROUTE_C | FXWC_DEFAULTROUTE_A;
-	emu->efx_voices_mask[1] = 0;
+	/* EFX capture - record the "FXBUS2" channels, by default we connect the EXTINs 
+	 * to these
+	 */	
+	
+	/* emu->efx_voices_mask[0] = FXWC_DEFAULTROUTE_C | FXWC_DEFAULTROUTE_A; */
+	if (emu->audigy) {
+		emu->efx_voices_mask[0] = 0;
+		emu->efx_voices_mask[1] = 0xffff;
+	} else {
+		emu->efx_voices_mask[0] = 0xffff;
+		emu->efx_voices_mask[1] = 0;
+	}
 	snd_ctl_add(emu->card, snd_ctl_new1(&snd_emu10k1_pcm_efx_voices_mask, emu));
 
 	snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(emu->pci), 64*1024, 64*1024);