Changes v1.0.17a v1.0.18rc1

From AlsaProject
Revision as of 01:00, 15 January 2001 by Perex (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Contents

Changelog between 1.0.17 and 1.0.18rc1 releases

alsa-driver

Sound Core

Fix build of hda-beep stuff with older 2.6 kernels
build stub for us122l
Release v1.0.18rc1

ALSA Core

Add a wrapper for strict_strtoul() for older kernels
Fix device_create_drvdata() in snd_card_register()
Add missing pr_xxx() for older kernels
Regenerate patch for replacement with device_create_drvdata()
Add device_create_drvdata() check
Fix build with recent linux-next tree
Revert "Add device_create_drvdata() check"
Kill snd_assert()
Add WARN() and WARN_ON() wrappers for older kernels
Add dev_printk() and co macros for 2.2/2.4 kernels
Force to re-define WARN_ON() for older 2.6 kernels
sound: cdev lock_kernel() pushdown
device create: sound: convert device_create to device_create_drvdata
PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
ALSA: Add jack reporting API
ALSA: Build jack detection
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
ALSA: IEC958 definition for consumer status channel update
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
ALSA: Add USB US122L driver
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
ALSA: Introduce snd_BUG_ON() macro
ALSA: Kill snd_assert() in sound/core/*
ALSA: Kill snd_assert() definition
ALSA: Clean up snd_BUG()

SoC PXA2xx Core

[ARM] 5063/1: pxa: add clk support for pxa2xx I2S
[ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api
ALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers

Control Midlevel

Kill snd_assert()
ALSA: Kill snd_assert() in sound/core/*

HWDEP Midlevel

Kill snd_assert()
ALSA: Kill snd_assert() in sound/core/*

Jack Input Event Midlevel

ALSA: Add jack reporting API

PCM Midlevel

snd/PCM: fasync BKL pushdown
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
pcm_native.c: remove unused label
Revert "pcm_native.c: remove unused label"

Timer Midlevel

ALSA: fix a typo during snd_assert() removal

/isa/Makefile

ALSA: wss_lib: move cs4231_lib into wss_lib

/soc/codecs/Makefile

ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ALSA: ASoC: AD1980 audio codec driver
ALSA: ASoC: Add WM8900 CODEC driver
ALSA: ASoC: Add WM8580 CODEC driver

AC97 Codec

ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.
ALSA: re-order AC97 codec ID table.
ALSA: make snd_ac97_add_vmaster() static
ALSA: ac97 - Enable mono-out on ALC203 codec as default
ALSA: Kill snd_assert() in sound/pci/*

AD1816A driver

ALSA: Kill snd_assert() in sound/isa/*

AD1848 driver

ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
ALSA: wss_lib: use wss constants instead of ad1848 ones
ALSA: wss_lib: replace ad1848 mixer element macros with wss ones
ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
ALSA: wss_lib: use wss mixer code instead of ad1848 one
ALSA: wss_lib: use wss pcm code instead of ad1848 one
ALSA: wss_lib: use wss detection code instead of ad1848 one

AD1889 driver

ALSA: Kill snd_assert() in sound/pci/*

AK4531 codec

ALSA: Kill snd_assert() in sound/pci/*

ALSA Minor Numbers

ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE

ALSA Version

ALSA: release v1.0.18rc1

ALSA<-OSS emulation

ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"

ALSA<-OSS sequencer

sound: ensure device number is valid in snd_seq_oss_synth_make_info

ARM PXA2XX driver

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach

ATIIXP driver

ALSA: Kill snd_assert() in sound/pci/*

ATIIXP-modem driver

ALSA: Kill snd_assert() in sound/pci/*

AZT2320 driver

ALSA: wss_lib: rename cs4231.h into wss.h
ALSA: wss_lib: rename cs4321_foo to wss_foo

AZT3328 driver

ALSA: sound/pci/azt3328.h: no variables for enums

Au12x0/Au1550 PSC ASoC

ALSA: Au1xpsc: psc not disabled when TX is idle

CMI8330 driver

ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
ALSA: wss_lib: use wss constants instead of ad1848 ones
ALSA: wss_lib: replace ad1848 mixer element macros with wss ones
ALSA: wss_lib: use wss pcm code instead of ad1848 one
ALSA: wss_lib: use wss detection code instead of ad1848 one

CMI8788 (Oxygen) driver

ALSA: virtuoso: add Xonar D1 support

CS4231 driver

Add build stub for new wss_lib
ALSA: wss_lib: move cs4231_lib into wss_lib
ALSA: wss_lib: rename cs4231.h into wss.h
ALSA: wss_lib: rename cs4321_foo to wss_foo

CS4236+ driver

ALSA: cs4232: fix crash during chip PNP detection
ALSA: wss_lib: rename cs4321_foo to wss_foo
ALSA: snd-cs4236: add Techmakers MF-4236PW PnP card ID
ALSA: Kill snd_assert() in sound/isa/*

CS423x drivers

Add build stub for new wss_lib
ALSA: wss_lib: move cs4231_lib into wss_lib

Conexant Riptide driver

riptide: treat firmware data as const

Digigram PCXHR driver

pcxhr: treat firmware data as const
Fix a const pointer usage warning in the Digigram pcxhr soundcard driver

Digigram VX core

vx: treat firmware data as const
ALSA: Kill snd_assert() in other places

Digigram VX222 driver

vx222: treat firmware data as const

Documentation

ALSA: virtuoso: add Xonar D1 support
remove mention of CONFIG_KMOD from documentation
Documentation cleanup: trivial misspelling, punctuation, and grammar corrections.
ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
ALSA: Introduce snd_BUG_ON() macro
ALSA: Kill snd_assert() definition
ALSA: ALSA-Configuration.txt: supported cards update
ALSA: Add missing description of usb-audio parameters
ALSA: usb-audio - Add ignore_ctl_error parameter

Dreamcast AICA sound (pcm) driver

sh: migrate to arch/sh/include/

ENS1370/1+ driver

ALSA: ens1370: SRC stands for Sample Rate Converter
ALSA: ALSA: ens1370: communicate PCI device to AC97

ES1688 driver

ALSA: Kill snd_assert() in sound/isa/*

GUS Library

ALSA: Kill snd_assert() in sound/isa/*

GUS MAX driver

ALSA: wss_lib: rename cs4321_foo to wss_foo

Generic drivers

ALSA: Kill snd_assert() in other places
sound: Fix esoteric double free in the dummy sound driver.
ALSA: dummy driver - do not use assignment in if condition

HDA Codec driver

ALSA: hda - Added support for Asus V1Sn
ALSA: hda - Add support of ASUS Eeepc P90*
ALSA: hda: digital pc-beep support hd-audio codecs
ALSA: HDA - Add automatic model setting for the Acer Aspire 5920G laptop
ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
ALSA: hda: added 92HD81/83 support
ALSA: hda - Fix sound on NEC Versa S9100
ALSA: hda: Add support for ECS/PC Chips boards with Sigmatel codecs
ALSA: hda - Don't reset SPDIF in each status change
ALSA: hda - initialize node 0x21 properly on AD1988 codecs
ALSA: hda - put all HDA codec IDs to components for precise hw detection
ALSA: hda: dynamically create capture mux controls
ALSA: hda: 92HD75xx fixes

HDA Intel driver

ALSA: hda - Align BDL position adjustment parameter
ALSA: hda_intel: ALSA HD Audio patch for Intel Ibex Peak DeviceIDs
ALSA: hda - support new AMD HDMI Audio (1002:970f)

HDA generic driver

hda: digital pc-beep support hd-audio codecs
fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
Fix build of hda-beep stuff with older 2.6 kernels
alsa-info.sh - upload to www.alsa-project.org, alsactl init changes in boot scripts
ALSA: hda: digital pc-beep support hd-audio codecs
ALSA: hda - use input_free_device()

ICE1712 driver

ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card
ALSA: sound/pci: supported cards update

ICE1724 driver

ALSA: ice1724/revo: simple clean up

IOCTL32 emulation

Kill snd_assert()

ISA

firmware: convert sb16_csp driver to use firmware loader exclusively
ALSA: wss_lib: move cs4231_lib into wss_lib
ALSA: wss_lib: use wss pcm code instead of ad1848 one
ALSA: wss_lib: use wss detection code instead of ad1848 one

Intel8x0 driver

ALSA: sound/pci: supported cards update

KORG1212 driver

Regenerated patches for request_firmware updates in kernel
fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
firmware: convert korg1212 driver to use firmware loader exclusively

MIXART driver

Fix a const pointer usage warning in the Digigram miXart soundcard driver

Maestro3 driver

Regenerated patches for request_firmware updates in kernel
fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
maestro3: treat firmware data as const
firmware: convert maestro3 driver to use firmware loader exclusively

Memalloc module

Fix compile warnings with older kernels
ALSA: Kill snd_assert() in sound/core/*

OPL3

ALSA: Kill snd_assert() in other places

OPL4

ALSA: Kill snd_assert() in other places

OSS device core

sound: cdev lock_kernel() pushdown
device create: sound: convert device_create to device_create_drvdata

Opti9xx drivers

ALSA: opti93x - Fix NULL dereference
ALSA: opti9xx: no isapnp param for !CONFIG_PNP
ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
ALSA: wss_lib: use wss constants instead of ad1848 ones
ALSA: wss_lib: use wss mixer code instead of ad1848 one
ALSA: wss_lib: use wss pcm code instead of ad1848 one
ALSA: wss_lib: use wss detection code instead of ad1848 one
ALSA: wss_lib: opti92x-ad1848 WSS_HW_DETECT fix
ALSA: Kill snd_assert() in sound/isa/*

PCI drivers

Fixed dependency of pci/ens1371.c
firmware: convert korg1212 driver to use firmware loader exclusively
firmware: convert ymfpci driver to use firmware loader exclusively
firmware: convert maestro3 driver to use firmware loader exclusively
ALSA: hda: digital pc-beep support hd-audio codecs
ALSA: virtuoso: add Xonar D1 support
ALSA: sound/pci/Kconfig: update for ice1712/24

RTC timer driver

Remove duplicated definition of is_power_of_2() from rtctimer.c

SA11xx UDA1341 driver

[ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
ALSA: Kill snd_assert() in other places

SB16/AWE driver

Regenerated patches for request_firmware updates in kernel
fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
firmware: convert sb16_csp driver to use firmware loader exclusively

Serial BUS drivers

Regenerated i2c/other/tea575x-tuner.patch

SoC Audio for the Atmel AT32 System-on-Chip

Add missing soc/* build stubs

SoC Audio for the Atmel AT91 System-on-Chip

[ARM] 5130/4: Support for the at91sam9g20

SoC Audio for the Samsung S3C24XX chips

[ARM] Eliminate useless includes of asm/mach-types.h

SoC Codec AD1980

Add missing soc/* build stubs
ALSA: ASoC: AD1980 audio codec driver

SoC Codec CS4270

ALSA: make the CS4270 driver a new-style I2C driver

SoC Codec TLV320AIC26

ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ALSA: ASoC: Export DAI and codec for TLV320AIC26
ALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26

SoC Codec WM8580

ALSA: ASoC: Add WM8580 CODEC driver

SoC Codec WM8750

ALSA: wm8750: it's MONO1, not MONO
ALSA: wm8750: add missing VREF output

SoC Codec WM8900

ALSA: ASoC: Add WM8900 CODEC driver

SoC Codec WM9712

ALSA: soc - wm9712 mono mixer

SoC DaVinci

[ARM] Eliminate useless includes of asm/mach-types.h

SoC Dynamic Audio Power Management

ALSA: ASoC: Refactor DAPM event handler
ALSA: ASoC: Factor PGA DAPM handling into main
ALSA: ASoC: Export dapm_reg_event() fully
ALSA: ASoC: Convert bitfields in ASoC into full int width
ALSA: ASoC: Rename mask to max to reflect usage
ALSA: ASoC: convert use of uint to unsigned int

SoC Freescale

ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
ALSA: ASoC: Add mpc5200-psc I2S driver
ALSA: ASoC: fix SNDCTL_DSP_SYNC support in Freescale 8610 sound drivers
ALSA: ASoC - fix DMA channel selection in Freescale MPC8610 sound drivers

SoC Layer

ALSA: ASoC: Allow codecs to override register display
ALSA: ASoC: Convert bitfields in ASoC into full int width
ALSA: ASoC: Rename mask to max to reflect usage
ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
ALSA: ASoC: Make OpenFirmware helper include file conditional
ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ALSA: ASoC: AD1980 audio codec driver
ALSA: ASoC: Add all CODECs Kconfig option
ALSA: ASoC: convert use of uint to unsigned int
ALSA: ASoC: Add WM8900 CODEC driver
ALSA: ASoC: Add WM8580 CODEC driver

SoC PXA2xx Poodle

ALSA: ASoC: Update Poodle to current ASoC API

SoC PXA2xx Spitz

ALSA: spitz: MONO -> MONO1

SoC PXA2xx Tosa

[ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api
ALSA: sound/soc/pxa/tosa.c: removed duplicated include

Sound Galaxy driver

ALSA: wss_lib: replace ad1848 mixer element macros with wss ones

TEA575x tuner

V4L/DVB (8484): videodev: missed two more usages of the removed 'owner' field.
V4L/DVB (8523): v4l2-dev: remove unused type and type2 field from video_device

USB

ALSA: Add USB US122L driver

USB USX2Y

build stub for us122l
ALSA: Add USB US122L driver

USB generic driver

ALSA: usb-audio: add BOSS GT-10 support
ALSA: Add USB US122L driver
ALSA: snd_usb_audio: fix SB Extigy IR Remote regression
ALSA: usb-audio - Add ignore_ctl_error parameter

Utils

alsa-info.sh - upload to www.alsa-project.org, alsactl init changes in boot scripts
recent alsactl cleanups for /etc/init.d boot scripts (use -r and restore only)

WSS library

Add build stub for new wss_lib
ALSA: wss_lib: move cs4231_lib into wss_lib
ALSA: wss_lib: rename cs4231.h into wss.h
ALSA: wss_lib: rename cs4321_foo to wss_foo
ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
ALSA: wss_lib: use wss constants instead of ad1848 ones
ALSA: wss_lib: use wss mixer code instead of ad1848 one
ALSA: wss_lib: use wss pcm code instead of ad1848 one
ALSA: wss_lib: fix opti93x capture formats limitations
ALSA: wss_lib: remove second mutexes initialization
ALSA: wss_lib: fix AZT2320 probe.
ALSA: wss_lib: rework snd_ad1848_probe()
ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.

Wavefront drivers

ALSA: wss_lib: rename cs4231.h into wss.h

YMFPCI driver

ymfpci: treat firmware data as const
firmware: convert ymfpci driver to use firmware loader exclusively

au88x0 driver

ALSA: au88x0: clipping ceiling loop wrong in comment

alsa-utils

Core

alsactl - install initialization files
Release v1.0.18rc1

ALSA Control (alsactl)

Initial 'alsactl init' implementation
alsactl init: added support for Lenovo T61
alsactl init: Changed support for Acer Travelmate 8100 (use subvendor and subdevice for matching)
alsactl init - Fix Lenovo T61 configuraton
alsactl - install initialization files
alsactl init configuration syntax changes
alsactl init - allow enum specification by name strings
alsactl init - add dB and percentual CTL{value} parsing for integer values
alsactl init - restore calls also init on failure
alsactl init - modified configuration for Acer Travelmate 8100
alsactl init - fixed enumeration string setting, update Lenovo T61 config (dB)

Speaker Test

alsactl - install initialization files

amixer

amixer - fixed TLV dBscale and added dBrange parsing

iecset

iecset update for new consumer status channel bits

alsa-plugins

Core

Add usb_stream PCM plugin
Release v1.0.18rc1

/Makefile.am

Add usb_stream PCM plugin

PulseAudio -> ALSA plugin

pulse - Returns errors instead of assert()
send both an uncork and a trigger in _start()

USB stream plugin

Add usb_stream PCM plugin

Detailed changelog between 1.0.17 and 1.0.18rc1 releases

alsa-driver

Sound Core

- Fix build of hda-beep stuff with older 2.6 kernels
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- build stub for us122l
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Release v1.0.18rc1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA Core

- Add a wrapper for strict_strtoul() for older kernels
It's a pretty lazy imlementation, maybe we need a better one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Fix device_create_drvdata() in snd_card_register()
Use the obsoleted device_create() for older kernels.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Add missing pr_xxx() for older kernels
pr_err() and co are newly defined.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Regenerate patch for replacement with device_create_drvdata()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Add device_create_drvdata() check
From: Eliot Blennerhassett <linux@audioscience.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- Fix build with recent linux-next tree
device_create_drvdata() is removed again, and device_create() is changed
again. sigh.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Revert "Add device_create_drvdata() check"
This reverts commit ad33f3a5598faaf568d935f835e62bcd2007d95b.
Commit 79fe3963cf1193f89880f4969f702e9efd98edc9 obsoletes it.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- Kill snd_assert()
Replace snd_assert() with snd_BUG_ON() and co.
Patches are re-generated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Add WARN() and WARN_ON() wrappers for older kernels
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Add dev_printk() and co macros for 2.2/2.4 kernels
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Force to re-define WARN_ON() for older 2.6 kernels
Force to re-define WARN_ON() for older 2.6 kernels.
The old WARN_ON() doesn't return the value, and this breaks some drivers
that check the return value from WARN_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- sound: cdev lock_kernel() pushdown
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- device create: sound: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- PAGE_ALIGN(): correctly handle 64-bit values on 32-bit architectures
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit
boundary. For example:
u64 val = PAGE_ALIGN(size);
always returns a value < 4GB even if size is greater than 4GB.
The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for
example):
#define PAGE_SHIFT 12
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
...
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
The "~" is performed on a 32-bit value, so everything in "and" with
PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary.
Using the ALIGN() macro seems to be the right way, because it uses
typeof(addr) for the mask.
Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in
include/linux/mm.h.
See also lkml discussion: http://lkml.org/lkml/2008/6/11/237
[akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c]
[akpm@linux-foundation.org: fix v850]
[akpm@linux-foundation.org: fix powerpc]
[akpm@linux-foundation.org: fix arm]
[akpm@linux-foundation.org: fix mips]
[akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c]
[akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c]
[akpm@linux-foundation.org: fix powerpc]
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ALSA: Add jack reporting API
Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.
This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.
The existing user space API with SW_HEADPHONE_INSERT is preserved.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Build jack detection
Since jack detection requires the input subsystem which may not be
desired on small systems it is not built unless required by a driver
that is being built. Drivers using jack detection should use a pattern
like this:
config SND_FOO
tristate "..."
...
select SND_JACK if INPUT=y || INPUT=SND
to ensure that the jack detection API is enabled if the input subsystem
is. If the input subsystem is not enabled then a stub version of the
API is provided.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.
Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.
Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: IEC958 definition for consumer status channel update
Updated IEC958 consumer status channel definitions according
to the third edition of IEC60958-3 spec.
Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.
New, updated patch with same subject replaces this commit.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a
dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.
Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)
Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Introduce snd_BUG_ON() macro
Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro.
snd_assert() is pretty ugly as it has the control flow in its argument.
OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much
easier to read the flow.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() in sound/core/*
Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() definition
Remove snd_assert() completely now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Clean up snd_BUG()
Use the standard WARN() macro for snd_BUG().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC PXA2xx Core

- [ARM] 5063/1: pxa: add clk support for pxa2xx I2S
Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- [ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api
The sound/soc/pxa/tosa.c contains dependencies on parts that never
ever hit mainline. Replace them with current support for tc6393xb.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- ALSA: ASoC: Permit simultaneous compilation of both PXA AC97 drivers
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Control Midlevel

- Kill snd_assert()
Replace snd_assert() with snd_BUG_ON() and co.
Patches are re-generated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: Kill snd_assert() in sound/core/*
Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

HWDEP Midlevel

- Kill snd_assert()
Replace snd_assert() with snd_BUG_ON() and co.
Patches are re-generated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: Kill snd_assert() in sound/core/*
Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Jack Input Event Midlevel

- ALSA: Add jack reporting API
Currently very few systems provide information about jack status to user
space, even though many have hardware facilities to do detection. Those
systems that do use an input device with the existing SW_HEADPHONE_INSERT
switch type to do so, often independently of ALSA.
This patch introduces a standard method for representing jacks to user
space into ALSA. It allows drivers to register jacks for a sound card with
the input subsystem, binding the input device to the card to help user
space associate the input devices with their sound cards. The created
input devices are named in the form "card longname jack" where jack is
provided by the driver when allocating a jack. By default the parent for
the input device is the sound card but this can be overridden by the
card driver.
The existing user space API with SW_HEADPHONE_INSERT is preserved.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

PCM Midlevel

- snd/PCM: fasync BKL pushdown
Chances are this is unneeded, but the code is twisty enough that it is hard
to tell.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.
Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.
Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.
New, updated patch with same subject replaces this commit.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.
Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)
Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- pcm_native.c: remove unused label
This fixes the warning
sound/core/pcm_native.c: In function 'snd_pcm_fasync':
sound/core/pcm_native.c:3262: warning: label 'out' defined but not used
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Revert "pcm_native.c: remove unused label"
This reverts commit 680db0136e0778a0d7e025af7572c6a8d82279e2. The label
is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible
snd_assert() macro.
That macro could probably be improved to be along the lines of
#define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0)
or similar to make sure that we always both evaluate 'expr' and parse
'args', but while gcc should optimize it all away, I'm too lazy to
really verify that. So I'll just admit defeat and will continue to live
with the annoying warning.
Noted-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Linus "Grr.." Torvalds

Timer Midlevel

- ALSA: fix a typo during snd_assert() removal
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

/isa/Makefile

- ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

/soc/codecs/Makefile

- ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ASoC Codec driver for the TLV320AIC26 device. As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: AD1980 audio codec driver
[Mechanical updates from code review applied -- broonie]
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add WM8900 CODEC driver
The WM8900 is designed for portable multimedia applications requiring
low power consumption, high performance audio and a compact form factor
providing:
- 24 bit stereo ADC and DAC
- Microphone and line inputs
- Line outputs
- Class G headphone amplifier
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add WM8580 CODEC driver
The WM8580 is an audio CODEC designed for DVD and surround sound
applications, offering three stereo DACs and a stereo ADC.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AC97 Codec

- ALSA: add TriTech 28023 AC97 codec ID and Wolfson 9701 name.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: re-order AC97 codec ID table.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: make snd_ac97_add_vmaster() static
This patch makes the needlessly global snd_ac97_add_vmaster() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: ac97 - Enable mono-out on ALC203 codec as default
Use pin 37 for mono-out as default on ALC203.
Reported-by: george pee <georgepee@gmail.com>
Tested-by: george pee <georgepee@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AD1816A driver

- ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AD1848 driver

- ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss constants instead of ad1848 ones
Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.
Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: replace ad1848 mixer element macros with wss ones
Use the wss macros instead of ad1848 ones.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use CS4231P instead of AD1848P (kill the AD1848P)
Use CS4231P instead of AD1848P (kill the AD1848P).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss mixer code instead of ad1848 one
Use the wss mixer code and kill the ad1848 mixer code.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.
The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss detection code instead of ad1848 one
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.
This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.
I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)
Sound playback and recording works on all these cards.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AD1889 driver

- ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AK4531 codec

- ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA Minor Numbers

- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.
Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.
Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.
New, updated patch with same subject replaces this commit.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices.
Additionally the device field of struct snd_pcm had to be changed to int,
as its "unsignednity" caused a lot of problems when comparing it to
potentially negative signed values. (-1 is 0xffffffff or even more then ;-)
Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA Version

- ALSA: release v1.0.18rc1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA<-OSS emulation

- ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE
When compiled with CONFIG_SND_DYNAMIC_MINORS the ALSA core is fine
to have more than 8 PCM devices per card, except one place - the
SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE ioctl, which will not enumerate
devices > 7. This patch fixes the issue, changing the devices list
organisation.
Instead of adding new device to the tail, the list is now kept always
ordered (by card number, then device number). Thus, during enumeration,
it is easy to discover the fact that there is no more given card's
devices. The same limit was present in OSS emulation code. It has
been fixed as well.
Additionally the device field of struct snd_pcm is now int, instead of
unsigned int, as there is no obvious reason for keeping it unsigned.
This caused a lot of problems with comparing this value with other
(almost always signed) variables. There is just one more place where
device number is unsigned - in struct snd_pcm_info, which should be
also sorted out in future.
Signed-off-by: Pawel MOLL <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- sound: Revert "ALSA: Fix limit of 8 PCM devices in SNDRV_CTL_IOCTL_PCM_NEXT_DEVICE"
This reverts commit fb3d6f2b77bdec75d45aa9d4464287ed87927866.
New, updated patch with same subject replaces this commit.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA<-OSS sequencer

- sound: ensure device number is valid in snd_seq_oss_synth_make_info
snd_seq_oss_synth_make_info() incorrectly reports information
to userspace without first checking for the validity of the
device number, leading to possible information leak (CVE-2008-3272).
Reported-By: Tobias Klein <tk@trapkit.de>
Acked-and-tested-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM PXA2XX driver

- [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ATIIXP driver

- ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ATIIXP-modem driver

- ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AZT2320 driver

- ALSA: wss_lib: rename cs4231.h into wss.h
Rename file include/sound/cs4231.h
into include/sound/wss.h
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rename cs4321_foo to wss_foo
Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

AZT3328 driver

- ALSA: sound/pci/azt3328.h: no variables for enums
AZF_FREQUENCIES and AZF_GAME_CONFIGS were variables, and this doesn't
seem to have been intended.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Au12x0/Au1550 PSC ASoC

- ALSA: Au1xpsc: psc not disabled when TX is idle
TX idleness isn't tested, but RX twice. PSC is not disabled when TX is idle
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

CMI8330 driver

- ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss constants instead of ad1848 ones
Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.
Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: replace ad1848 mixer element macros with wss ones
Use the wss macros instead of ad1848 ones.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.
The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss detection code instead of ad1848 one
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.
This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.
I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)
Sound playback and recording works on all these cards.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

CMI8788 (Oxygen) driver

- ALSA: virtuoso: add Xonar D1 support
Add support for the Asus Xonar D1. It is the same as the DX, but
without the external power detection.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

CS4231 driver

- Add build stub for new wss_lib
Also remove obsolete files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rename cs4231.h into wss.h
Rename file include/sound/cs4231.h
into include/sound/wss.h
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rename cs4321_foo to wss_foo
Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

CS4236+ driver

- ALSA: cs4232: fix crash during chip PNP detection
The acard->wss pointer is uninitialized in this function
which leads to crash during chip PNP detection.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: wss_lib: rename cs4321_foo to wss_foo
Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: snd-cs4236: add Techmakers MF-4236PW PnP card ID
Add the Techmakers MF-4236PW (Crystal CX4236B-XQ3) PnP card ID.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

CS423x drivers

- Add build stub for new wss_lib
Also remove obsolete files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Conexant Riptide driver

- riptide: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Digigram PCXHR driver

- pcxhr: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- Fix a const pointer usage warning in the Digigram pcxhr soundcard driver
Fix a const pointer usage warning in the Digigram pcxhr compatible soundcard
driver. A const pointer is being passed to copy_from_user() to load the
firmware into. This is okay in this case because the function has allocated
the firmware struct itself, but the const qualifier is part of the firmware
struct - so the patch casts the const away.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Digigram VX core

- vx: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Digigram VX222 driver

- vx222: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Documentation

- ALSA: virtuoso: add Xonar D1 support
Add support for the Asus Xonar D1. It is the same as the DX, but
without the external power detection.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
- remove mention of CONFIG_KMOD from documentation
Also includes a few Kconfig files (xtensa, blackfin)
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: linux-doc@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
- Documentation cleanup: trivial misspelling, punctuation, and grammar corrections.
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.
To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.
This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.
Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
!codec->bus->modelname) {
But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: Introduce snd_BUG_ON() macro
Introduced snd_BUG_ON() macro as a replacement of snd_assert() macro.
snd_assert() is pretty ugly as it has the control flow in its argument.
OTOH, snd_BUG_ON() behaves like a normal conditional, thus it's much
easier to read the flow.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() definition
Remove snd_assert() completely now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ALSA-Configuration.txt: supported cards update
ALSA-Configuration.txt: supported cards update
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Add missing description of usb-audio parameters
Added the missing description of module parameters of usb-audio driver
to ALSA-Configuration.txt.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: usb-audio - Add ignore_ctl_error parameter
Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces. It was a hard-coded ifdef, and now you
can change it more easily.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Dreamcast AICA sound (pcm) driver

- sh: migrate to arch/sh/include/
This follows the sparc changes a439fe51a1f8eb087c22dd24d69cebae4a3addac.
Most of the moving about was done with Sam's directions at:
http://marc.info/?l=linux-sh&m=121724823706062&w=2
with subsequent hacking and fixups entirely my fault.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

ENS1370/1+ driver

- ALSA: ens1370: SRC stands for Sample Rate Converter
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ALSA: ens1370: communicate PCI device to AC97
communicate the ES137x PCI device to the AC97 code for its
subsys_vendor/device values
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ES1688 driver

- ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

GUS Library

- ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

GUS MAX driver

- ALSA: wss_lib: rename cs4321_foo to wss_foo
Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Generic drivers

- ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- sound: Fix esoteric double free in the dummy sound driver.
The dummy driver uses runtime->private_free but still frees
its pcm structures on error paths.
This is esoteric because the error paths in question are
unreachable. Thus the bug is only a problem when someone
copies this code into other drivers.
Signed-off-by: Daniel R Thompson <daniel.thompson@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: dummy driver - do not use assignment in if condition
checkpatch.pl does not like assignment in if condition
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

HDA Codec driver

- ALSA: hda - Added support for Asus V1Sn
Added the necessary ID for Asus V1Sn to patch_realtek.c
to use ALC861VD_LENOVO on these laptops.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - Add support of ASUS Eeepc P90*
- Support ASUS_P900A = P703
- Support ASUS_P901
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda: digital pc-beep support hd-audio codecs
Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: HDA - Add automatic model setting for the Acer Aspire 5920G laptop
Make the Acer Aspire 5920G (1025:0121) select ALC883_ACER_ASPIRE by default.
Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Allow to force model to intel-mac-v3 in snd_hda_intel (sigmatel).
Currently, even if you pass model=intel-mac-v3 as a module parameter to
snd_hda_intel, the function patch_stac922x (patch_sigmatel.c) will still
try to auto-detect the model type. This is a problem on my MacBook Pro 1st
generation, which needs intel-mac-v3, but sometimes incorrectly reports
0x00000100 as subsystem id, which causes the switch in patch_stac922x to
select intel-mac-v4.
To fix this, I added a new model called intel-mac-auto, so in case no
module parameter is passed, and an Intel Mac board is detected, the
model will be automatically detected, while no detection will be done
if the model is forced to intel-mac-v3.
This problem has been around for quite a while, and I used to fix it
by moving the case statement for 0x00000100 in patch_stac922x so that
intel-mac-v3 is chosen.
Another way to fix the problem would be to check if a module parameter
was set directly in patch_stac922x, using something like this:
if (spec->board_config == STAC_INTEL_MAC_V3 &&
!codec->bus->modelname) {
But I think it is less elegant (if you prefer that way, I can prepare a
patch).
Signed-off-by: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: hda: added 92HD81/83 support
Added support for 92HD81/83 family of codecs.
This also includes a pwr_mapping array for pins that have more than
one amp to power down.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - Fix sound on NEC Versa S9100
This patch adds sound support for NEC Versa S9100
With it, we get sound on the internal speaker and headphone (with
automute working) while there is no sound by default.
External mic also works fine but I don't know if there is an internal
one (if there is an internal mic it does not work currently), and I
had to send back the hardware.
Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda: Add support for ECS/PC Chips boards with Sigmatel codecs
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil
(www.cdibrasil.com.br/) for sponsoring this development.
Signed-off-by: Gilberto <gilberto@sistemafenix.com.br>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - Don't reset SPDIF in each status change
The SPDIF output is toggled at each time any SPDIF status bits are changed
because of the known problems on some codecs. But, this also results in
loosing the sync, and the problem is more obvious on HDMI output over
SPDIF. Since the toggle is necessary only for some codecs, we should
check whether this workaround is needed and skip if unnecessary.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - initialize node 0x21 properly on AD1988 codecs
The widget node 0x21 should be initialized as unmuted/full (0dB)
as default. This will reduce additional manual work by user at the
first time use.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - put all HDA codec IDs to components for precise hw detection
Export HDA codec subvendor ID and revision ID to user space via the
components variable. Our alsactl utility requires these values for
the perfect hardware identification.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda: dynamically create capture mux controls
Dynamically create capture mux volume controls when a output amp is detected.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda: 92HD75xx fixes
Fixed several noise issues with DACs and ADCs on some 92HD75xxx based codecs
with certain revision id's.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

HDA Intel driver

- ALSA: hda - Align BDL position adjustment parameter
It seems NVidia and other hardwares require the alignment for period
update timing. For satisfying this condition, align the position
adjustment for delayed wake-up to the initial bdl_pos_adj value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda_intel: ALSA HD Audio patch for Intel Ibex Peak DeviceIDs
This patch adds the Intel Ibex Peak (PCH) HD Audio Controller DeviceIDs.
Signed-off by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: hda - support new AMD HDMI Audio (1002:970f)
Signed-off-by: Libin Yang <libin.yang@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

HDA generic driver

- hda: digital pc-beep support hd-audio codecs
Added the respective file entry to call ../alsa-kernel/pci/hda_beep.c
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- Fix build of hda-beep stuff with older 2.6 kernels
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- alsa-info.sh - upload to www.alsa-project.org, alsactl init changes in boot scripts
The alsa-info.sh script has been updated to upload status contents to
www.alsa-project.org server. The reason is to keep information for later
purposes (comparing configuration, write "alsactl init" default settings
and so on).
The alsactl command has "init" function now. Use this functionality in
/etc/init.d boot scripts (alsasound and alsasound.posix). Create file
/var/run/alsactl.init.failed when initial configuration does not exist
(might be improved to test cards separately not all-in-one).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda: digital pc-beep support hd-audio codecs
Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: hda - use input_free_device()
Use input_free_devce() correctly instead of kfree() at error path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ICE1712 driver

- ALSA: ice1724 - Support for Terrasoniq/MUSONIK TS22 PCI card
Added support for Terrasoniq/MUSONIK TS22 PCI card.
Signed-off-by: Misha Zhilin <misha@epiphan.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: sound/pci: supported cards update
sound/pci: supported cards update
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ICE1724 driver

- ALSA: ice1724/revo: simple clean up
ice1724/revo: simple clean up
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

IOCTL32 emulation

- Kill snd_assert()
Replace snd_assert() with snd_BUG_ON() and co.
Patches are re-generated.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ISA

- firmware: convert sb16_csp driver to use firmware loader exclusively
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.
The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss detection code instead of ad1848 one
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.
This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.
I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)
Sound playback and recording works on all these cards.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Intel8x0 driver

- ALSA: sound/pci: supported cards update
sound/pci: supported cards update
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

KORG1212 driver

- Regenerated patches for request_firmware updates in kernel
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- firmware: convert korg1212 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

MIXART driver

- Fix a const pointer usage warning in the Digigram miXart soundcard driver
Fix a const pointer usage warning in the Digigram miXart soundcard driver. A
const pointer is being passed to copy_from_user() to load the firmware into.
This is okay in this case because the function has allocated the firmware
struct itself, but the const qualifier is part of the firmware struct - so the
patch casts the const away.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Maestro3 driver

- Regenerated patches for request_firmware updates in kernel
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- maestro3: treat firmware data as const
The maestro3 driver is byte-swapping its firmware to be host-endian in
advance, when it doesn't seem to be necessary -- we could just use
le16_to_cpu() as we load it.
Doing that means that we need to switch the in-tree firmware to be
little-endian too.
Take the least intrusive way of doing this, which is to switch the
existing snd_m3_convert_from_le() function to convert _to_ little-endian
instead, and use it on the in-tree firmware instead of the loaded
firmware. It's a bit suboptimal but doesn't matter much right now
because we're about to remove the special cases for the in-tree version
anyway.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- firmware: convert maestro3 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

Memalloc module

- Fix compile warnings with older kernels
The older kernels don't work well with WARN_ON(). (Re-)define it
in memalloc.inc.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: Kill snd_assert() in sound/core/*
Kill snd_assert() in sound/core/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

OPL3

- ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

OPL4

- ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

OSS device core

- sound: cdev lock_kernel() pushdown
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
- device create: sound: convert device_create to device_create_drvdata
device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.
Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Opti9xx drivers

- ALSA: opti93x - Fix NULL dereference
Probing non-existing device causes Oops with snd-opti93x driver
due to NULL access in the destructor of the error path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Rene Herman <rene.herman@gmail.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: opti9xx: no isapnp param for !CONFIG_PNP
"isapnp" needs CONFIG_PNP to be useful.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss constants instead of ad1848 ones
Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.
Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss mixer code instead of ad1848 one
Use the wss mixer code and kill the ad1848 mixer code.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.
The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss detection code instead of ad1848 one
Use the wss detection code and kill the ad1848 library.
The library is fully assimilated into the new wss library.
This required reworking of the AD1848 family code
so the code is changed to correctly detect chips from
the AD1848 and CS4231 families.
I have tested it on following cards:
Gallant SC-6600 (codec: AD1848, driver: snd-sc6600)
SoundScape VIVO/90 (codec: AD1845, driver: snd-sscape)
SG Waverider (codec: CS4231A, driver: Rene Herman's snd-galaxy)
Opti930 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Opti931 (codec: built-in - CS4231 compatible, driver: snd-opti93x)
Gallant SC-70P (chip/codec: CS4237B, driver: snd-cs4236)
Audio Plus 3D (chip/codec: CMI8330A, driver: snd-cmi8330)
Dell Latitude CP (chip/codec: cs4236, driver snd-cs4232)
Sound playback and recording works on all these cards.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: opti92x-ad1848 WSS_HW_DETECT fix
snd-opti92x-ad1848 mistakingly passes WSS_HW_OPTI93X currently. This
fixes it as tested with a OPTi 82C929A/AD1848 card.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: Kill snd_assert() in sound/isa/*
Kill snd_assert() in sound/isa/*, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

PCI drivers

- Fixed dependency of pci/ens1371.c
- firmware: convert korg1212 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- firmware: convert ymfpci driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- firmware: convert maestro3 driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- ALSA: hda: digital pc-beep support hd-audio codecs
Added digital pc-beep support using linear tone generation for hd-codecs along
with initial support for several IDT codecs.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: virtuoso: add Xonar D1 support
Add support for the Asus Xonar D1. It is the same as the DX, but
without the external power detection.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
- ALSA: sound/pci/Kconfig: update for ice1712/24
sound/pci/Kconfig: update for ice1712/24
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

RTC timer driver

- Remove duplicated definition of is_power_of_2() from rtctimer.c
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SA11xx UDA1341 driver

- [ARM] Remove asm/hardware.h, use asm/arch/hardware.h instead
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h.
Then, since asm/hardware.h only exists to include asm/arch/hardware.h,
update everything to directly include asm/arch/hardware.h and remove
asm/hardware.h.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SB16/AWE driver

- Regenerated patches for request_firmware updates in kernel
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- fix compilation issues caused by the latest linux-2.6 tree merge (firmware & hda_beep)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- firmware: convert sb16_csp driver to use firmware loader exclusively
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Serial BUS drivers

- Regenerated i2c/other/tea575x-tuner.patch
2.6.27-rc1 broke the patch. No longer vd.hardware and vd.type fields.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SoC Audio for the Atmel AT32 System-on-Chip

- Add missing soc/* build stubs
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SoC Audio for the Atmel AT91 System-on-Chip

- [ARM] 5130/4: Support for the at91sam9g20
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
AT91sam9g20 is an evolution of the at91sam9260 with a faster clock
speed.
We created a new board for this device but based the chip support
directly on 9260 files with little updates.
Here is the chip page on Atmel wabsite:
http://atmel.com/dyn/products/product_card.asp?part_id=4337
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Justin Waters <justin.waters@timesys.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

SoC Audio for the Samsung S3C24XX chips

- [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file. Remove these unnecessary
includes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

SoC Codec AD1980

- Add missing soc/* build stubs
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: ASoC: AD1980 audio codec driver
[Mechanical updates from code review applied -- broonie]
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Codec CS4270

- ALSA: make the CS4270 driver a new-style I2C driver
Update the CS4270 ALSA device driver to use the new-style I2C interface.
Starting with the 2.6.27 PowerPC kernel, I2C devices that have entries in the
device trees can no longer be probed by old-style I2C drivers. The device
tree for Freescale MPC8610 HPCD has included an entry for the CS4270 since
2.6.25, but that entry was previously ignored by the PowerPC I2C subsystem.
Since that's no longer the case, the best solution is to update the CS4270
driver to a new-style interface, rather than try to revert the behavior of
new PowerPC I2C subsystem.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Codec TLV320AIC26

- ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ASoC Codec driver for the TLV320AIC26 device. As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Export DAI and codec for TLV320AIC26
This fixes sparse warnings and allows non-OpenFirmware systems to attempt
to bind to the device.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Staticise keyclick dev_attr in tlv320aic26
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Codec WM8580

- ALSA: ASoC: Add WM8580 CODEC driver
The WM8580 is an audio CODEC designed for DVD and surround sound
applications, offering three stereo DACs and a stereo ADC.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Codec WM8750

- ALSA: wm8750: it's MONO1, not MONO
Since first commit wm8750 contained output named MONO, but
all routes mentioned MONO1. Correct MONO to be MONO1.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: wm8750: add missing VREF output
Add missing output VREF. After a65f0568f6cc8433877fb71dd7d36b551854b0bc
it's critical, since it makes chip routing initialisation to fail.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SoC Codec WM8900

- ALSA: ASoC: Add WM8900 CODEC driver
The WM8900 is designed for portable multimedia applications requiring
low power consumption, high performance audio and a compact form factor
providing:
- 24 bit stereo ADC and DAC
- Microphone and line inputs
- Line outputs
- Class G headphone amplifier
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Codec WM9712

- ALSA: soc - wm9712 mono mixer
this fixes typo in wm9712 codec which prevents it from registering all audio
routes (and thus working correctly). Please consider applying.
(Tested and works on palmtx, palmld and palmt5)
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mark Brown <brooie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC DaVinci

- [ARM] Eliminate useless includes of asm/mach-types.h
There are 43 includes of asm/mach-types.h by files that don't
reference anything from that file. Remove these unnecessary
includes.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

SoC Dynamic Audio Power Management

- ALSA: ASoC: Refactor DAPM event handler
The DAPM event callback code has many layers of indentation, taking it
over 80 columns. Refactor the code to give less indentation in order to
avoid checkpatch issues on further changes and exploding indentation.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Factor PGA DAPM handling into main
This allows pre and post event hooks to be provided for PGA widgets.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Export dapm_reg_event() fully
dapm_reg_event() is used by devices using SND_SOC_DAPM_REG() so needs to
be exported to support building them as modules and prototyped to avoid
sparse warnings and potential build issues.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Convert bitfields in ASoC into full int width
Convert bitfields in ASoC into full int width. This is a
simple mechanical conversion. Two places in the DAPM code
were fixed to properly use mask.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Rename mask to max to reflect usage
Most of the ASoC controls refer to the maximum value that can be set for
a control as mask but there is no actual requirement for all bits to be
set at the highest possible value making the name mask misleading.
Change the code to use max instead.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: convert use of uint to unsigned int
ASOC: convert use of uint to unsigned int
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Freescale

- ALSA: asoc: restrict sample rate and size in Freescale MPC8610 sound drivers
The Freescale MPC8610 SSI device has the option of using one clock for both
transmit and receive (synchronous mode), or independent clocks (asynchronous).
The SSI driver, however, programs the SSI into synchronous mode and then
tries to program the clock registers independently. The result is that the wrong
sample size is usually generated during recording.
This patch fixes the discrepancy by restricting the sample rate and sample size
of the playback and capture streams. The SSI driver remembers which stream
is opened first. When a second stream is opened, that stream is constrained
to the same sample rate and size as the first stream.
A future version of this driver will lift the sample size restriction.
Supporting independent sample rates is more difficult, because only certain
codecs provide dual independent clocks.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
Simple utility layer for creating ASoC machine instances based on data
in the OpenFirmware device tree. OF aware platform drivers and codec
drivers register themselves with this framework and the framework
automatically instantiates a machine driver. At the moment, the driver
is not very capable and it is expected to be extended as more features
are needed for specifying the configuration in the device tree.
This is most likely temporary glue code to work around limitations in
the ASoC v1 framework. When v2 is merged, most of this driver will
need to be reworked.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add mpc5200-psc I2S driver
This is an I2S bus driver for the MPC5200 PSC device. It depends on the
soc-of helper functions to match a PSC device with a codec based on data
in the device tree.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: fix SNDCTL_DSP_SYNC support in Freescale 8610 sound drivers
If an OSS application calls SNDCTL_DSP_SYNC, then ALSA will call the driver's
_hw_params and _prepare functions again. On the Freescale MPC8610 DMA ASoC
driver, this caused the DMA controller to be unneccessarily re-programmed, and
apparently it doesn't like that. The DMA will then not operate when
instructed. This patch relocates much of the DMA programming to
fsl_dma_open(), which is called only once.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC - fix DMA channel selection in Freescale MPC8610 sound drivers
On the Freescale MPC8610, SSI1 is hard-coded to use DMA channels 0 and 1
for playback and capture, and SSI2 is hard-coded to use DMA channels 2 and 3.
This patch fixes the fabric driver so that it uses the right channels.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC Layer

- ALSA: ASoC: Allow codecs to override register display
Some codecs have unusual features in their register maps such as very
large registers representing arrays of coefficients. Support these
codecs in the register cache sysfs file by allowing them to provide a
function register_display() overriding the default output for register
contents.
Also ensure that we don't overflow PAGE_SIZE while writing out the
register dump.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Convert bitfields in ASoC into full int width
Convert bitfields in ASoC into full int width. This is a
simple mechanical conversion. Two places in the DAPM code
were fixed to properly use mask.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Rename mask to max to reflect usage
Most of the ASoC controls refer to the maximum value that can be set for
a control as mask but there is no actual requirement for all bits to be
set at the highest possible value making the name mask misleading.
Change the code to use max instead.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add OpenFirmware helper for matching bus and codec drivers
Simple utility layer for creating ASoC machine instances based on data
in the OpenFirmware device tree. OF aware platform drivers and codec
drivers register themselves with this framework and the framework
automatically instantiates a machine driver. At the moment, the driver
is not very capable and it is expected to be extended as more features
are needed for specifying the configuration in the device tree.
This is most likely temporary glue code to work around limitations in
the ASoC v1 framework. When v2 is merged, most of this driver will
need to be reworked.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Make OpenFirmware helper include file conditional
The OpenFirmware API headers don't build on all platforms so ensure
that they are not included unless they are being used.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add Texas Instruments TLV320AIC26 codec driver
ASoC Codec driver for the TLV320AIC26 device. As it stands, this driver
doesn't support all the modes and clocking options of the AIC16, but it
is a start.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: AD1980 audio codec driver
[Mechanical updates from code review applied -- broonie]
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add all CODECs Kconfig option
Allow all the CODEC drivers to be built without a machine driver in order
to facilitate testing of subsystem-wide changes and gain better coverage
from automated testing efforts. This also helps things like the generic
OpenFirmware machine driver for PowerPC.
Currently AC97 CODECs are not included since the current setup relies
on having a controller driver available.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: convert use of uint to unsigned int
ASOC: convert use of uint to unsigned int
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add WM8900 CODEC driver
The WM8900 is designed for portable multimedia applications requiring
low power consumption, high performance audio and a compact form factor
providing:
- 24 bit stereo ADC and DAC
- Microphone and line inputs
- Line outputs
- Class G headphone amplifier
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: ASoC: Add WM8580 CODEC driver
The WM8580 is an audio CODEC designed for DVD and surround sound
applications, offering three stereo DACs and a stereo ADC.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC PXA2xx Poodle

- ALSA: ASoC: Update Poodle to current ASoC API
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

SoC PXA2xx Spitz

- ALSA: spitz: MONO -> MONO1
Correct route name to be MONO1 instead of MONO to follow
recent fix in wm8750.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

SoC PXA2xx Tosa

- [ARM] 5098/1: fix sound/soc/pxa/tosa.c to new gpio api
The sound/soc/pxa/tosa.c contains dependencies on parts that never
ever hit mainline. Replace them with current support for tc6393xb.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- ALSA: sound/soc/pxa/tosa.c: removed duplicated include
Removed duplicated include <asm/arch/tosa.h> in
sound/soc/pxa/tosa.c.
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Sound Galaxy driver

- ALSA: wss_lib: replace ad1848 mixer element macros with wss ones
Use the wss macros instead of ad1848 ones.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

TEA575x tuner

- V4L/DVB (8484): videodev: missed two more usages of the removed 'owner' field.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
- V4L/DVB (8523): v4l2-dev: remove unused type and type2 field from video_device
The type and type2 fields were unused and so could be removed.
Instead add a vfl_type field that contains the type of the video
device.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

USB

- ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a
dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

USB USX2Y

- build stub for us122l
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a
dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

USB generic driver

- ALSA: usb-audio: add BOSS GT-10 support
Add a quirk entry for the BOSS GT-10.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
- ALSA: Add USB US122L driver
Added a new US122L usb-audio driver. This driver works together with a
dedicated alsa-lib plugin.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: snd_usb_audio: fix SB Extigy IR Remote regression
The support for the SB Extigy's remote seems to be broken in all
recent ALSA versions, including 1.0.17. The driver detects the event
correctly, then submits a URB to query the RC code. On the Extigy, the
URB is submitted with a length of 2 bytes. My hardware, however, only
replies with 1 byte, containing the correct RC button code. The
current implementation discards this as being too short. (line 1784 of
usbmixer.c)
This patch specifies a "minimum packet length" in the remote control
configuration. I've left the values for the Audigy 2/Live! the same as
the packet length, as I'm assuming the existing code works with them.
(I don't have the hardware to confirm) This fixes the Extigy RC
support, e.g. for use with Lirc.
Signed-off-by: Phillip Michael Jordan <phil@philjordan.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: usb-audio - Add ignore_ctl_error parameter
Added the ignore_ctl_error parameter to enable/disable the control-error
handling for mixer interfaces. It was a hard-coded ifdef, and now you
can change it more easily.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Utils

- alsa-info.sh - upload to www.alsa-project.org, alsactl init changes in boot scripts
The alsa-info.sh script has been updated to upload status contents to
www.alsa-project.org server. The reason is to keep information for later
purposes (comparing configuration, write "alsactl init" default settings
and so on).
The alsactl command has "init" function now. Use this functionality in
/etc/init.d boot scripts (alsasound and alsasound.posix). Create file
/var/run/alsactl.init.failed when initial configuration does not exist
(might be improved to test cards separately not all-in-one).
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- recent alsactl cleanups for /etc/init.d boot scripts (use -r and restore only)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

WSS library

- Add build stub for new wss_lib
Also remove obsolete files.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- ALSA: wss_lib: move cs4231_lib into wss_lib
Move the file sound/isa/cs423x/cs4231_lib.c
into sound/isa/cs423x/wss_lib.c
This is the first step toward merging all libraries
for Windows Sound System compatible chips
into a single library.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rename cs4231.h into wss.h
Rename file include/sound/cs4231.h
into include/sound/wss.h
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rename cs4321_foo to wss_foo
Rename functions and structures from the former
cs4321_lib to names more corresponding with the
new name: wss_lib.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use struct snd_wss instead of snd_ad1848
The snd_wss is superset of the snd_ad1848 so kill
the latter and replace it with the snd_wss.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss constants instead of ad1848 ones
Use wss constants for mode.
Move ad1848 hardware constants to the wss.h.
Move mixer tlv macros into the ad1848_lib.c from the ad1848.h.
Drop the MODE_RUNNING spurious IRQ guard on AD1848 as it doesn not seem
to be needed.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss mixer code instead of ad1848 one
Use the wss mixer code and kill the ad1848 mixer code.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: use wss pcm code instead of ad1848 one
Use the wss pcm code and kill the ad1848 pcm code.
The AD1848 chip is much slower than CS4231 chips
so the waiting loop was increased 100x (10x is not
enough).
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: fix opti93x capture formats limitations
Limit opti93x cards capture formats to only linear ones.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: remove second mutexes initialization
Remove initializations of spinlock and mutexes which
are done earlier in snd_wss_new(). The snd_wss_new()
is called from snd_wss_create().
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: fix AZT2320 probe.
After the transition from cs4321_lib to wss_lib, azt2320 probe visits
snd_ad1848_probe during detection. It expects register 0 (LEFT_INPUT)
to be able to retain the value 0xaa during detection but AZT2320 does
not support MIC gain meaning it reads back as 0x8a instead.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: rework snd_ad1848_probe()
Make snd_ad1848_probe() easier to follow. With an exception for only
trying once as soon as the codec is out of init (which should be all
that's needed) the detection logic should be unchanged.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- ALSA: wss_lib: missing closing brace in (ifdeffed out) debug function.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Wavefront drivers

- ALSA: wss_lib: rename cs4231.h into wss.h
Rename file include/sound/cs4231.h
into include/sound/wss.h
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reviewed-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

YMFPCI driver

- ymfpci: treat firmware data as const
Standardise both in-kernel and loaded firmware to be stored as
little-endian instead of host-endian.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- firmware: convert ymfpci driver to use firmware loader exclusively
Signed-off-by: David Woodhouse <dwmw2@infradead.org>

au88x0 driver

- ALSA: au88x0: clipping ceiling loop wrong in comment
As is the clipping ceiling loop appears wrong anyways
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

alsa-utils

Core

- alsactl - install initialization files
Also, spearate SOUNDSDIR and DATADIR in configure.in.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- Release v1.0.18rc1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

ALSA Control (alsactl)

- Initial 'alsactl init' implementation
See 'man 7 alsactl_init' for more details.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init: added support for Lenovo T61
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init: Changed support for Acer Travelmate 8100 (use subvendor and subdevice for matching)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init - Fix Lenovo T61 configuraton
- alsactl - install initialization files
Also, spearate SOUNDSDIR and DATADIR in configure.in.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init configuration syntax changes
- change SYSFS_DEVICE to CONFIG{sysfs_device}
- INCLUDE key now handles also directories
- RESULT key can assign value now
- EXIT="return" operation returns from included file immediately
Default 00main and hda configuration files changes:
- handle preinit and postinit directories
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init - allow enum specification by name strings
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init - add dB and percentual CTL{value} parsing for integer values
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init - restore calls also init on failure
The initialization procedure consist from default initialization and
state restoration. When restore fails for a reason or the config file
contains inaccurate information, then init is called.
Also, if something fails (init or restore), a file specified using -r
option can be created with description what failed. It can be useful
when user space decides to notify user to set the sound driver properly.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
- alsactl init - modified configuration for Acer Travelmate 8100
- alsactl init - fixed enumeration string setting, update Lenovo T61 config (dB)
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

Speaker Test

- alsactl - install initialization files
Also, spearate SOUNDSDIR and DATADIR in configure.in.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

amixer

- amixer - fixed TLV dBscale and added dBrange parsing
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

iecset

- iecset update for new consumer status channel bits
Added iecset support for some of consumer status channel bits,
new in the third edition od IEC60958-3 spec.
Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

alsa-plugins

Core

- Add usb_stream PCM plugin
usb_stream PCM plugin is used together with snd-usb-us122l driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Release v1.0.18rc1
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

/Makefile.am

- Add usb_stream PCM plugin
usb_stream PCM plugin is used together with snd-usb-us122l driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

PulseAudio -> ALSA plugin

- pulse - Returns errors instead of assert()
Some sanity checks in pcm_pulse.c with assert() causes the program to
abort unexpectedly when the pulseaudio daemon is dead. This is
suboptimal. Examples:
https://bugzilla.novell.com/show_bug.cgi?id=409532
Now fixed to return an error instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- send both an uncork and a trigger in _start()
Heya!
Here's a patch for alsa-plugins:
When playing very short streams, the pulse plugin needs call
pa_stream_trigger() in snd_pcm_start() to make sure the stream is
actually started, in addition to uncorking the stream.
Lennart
Signed-off-by: Takashi Iwai <tiwai@suse.de>

USB stream plugin

- Add usb_stream PCM plugin
usb_stream PCM plugin is used together with snd-usb-us122l driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Custom Search
Personal tools
Namespaces

Variants
Actions
Navigation
wiki
Toolbox