!!################################ !!ALSA Information Script v 0.4.62 !!################################ !!Script ran on: Sun Sep 22 17:21:27 UTC 2013 !!Linux Distribution !!------------------ Gentoo Base System release 2.2 NAME=Gentoo ID=gentoo PRETTY_NAME="Gentoo/Linux" HOME_URL="http://www.gentoo.org/" SUPPORT_URL="http://www.gentoo.org/main/en/support.xml" BUG_REPORT_URL="https://bugs.gentoo.org/" !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: !!Kernel Information !!------------------ Kernel release: 3.10.7-gentoo Operating System: GNU/Linux Architecture: i686 Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz SMP Enabled: No !!ALSA Version !!------------ Driver version: k3.10.7-gentoo Library version: 1.0.27.1 Utilities version: 1.0.27.1 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750,51 at irq 7 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:1f.5 0401: 8086:24c5 (rev 02) Subsystem: 1028:0149 !!Loaded sound module options !!--------------------------- !!AC97 Codec information !!---------------------- --startcollapse-- 0-0/0: SigmaTel STAC9750,51 PCI Subsys Vendor: 0x1028 PCI Subsys Device: 0x0149 Flags: 0 Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 20-bit 3D enhancement : SigmaTel 3D Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 AMAP DSA=0 VRA Extended status : VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz 0:00 = 6a90 0:02 = 1111 0:04 = 1212 0:06 = 8008 0:08 = 0000 0:0a = 001e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 8303 0:14 = 9f1f 0:16 = 9f1f 0:18 = 1313 0:1a = 0000 0:1c = 0f0f 0:1e = 0000 0:20 = 0000 0:22 = 000c 0:24 = 0000 0:26 = 000f 0:28 = 0601 0:2a = 0001 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0100 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0003 0:4e = ffff 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0002 0:6e = 1000 0:70 = 0000 0:72 = 0000 0:74 = 0800 0:76 = 0000 0:78 = 0000 0:7a = 0000 0:7c = 8384 0:7e = 7650 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 0 Sep 22 17:54 /dev/snd/controlC0 crw-rw---- 1 root root 116, 24 Sep 22 17:54 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 16 Sep 22 17:54 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 25 Sep 22 17:54 /dev/snd/pcmC0D1c crw-rw---- 1 root root 116, 26 Sep 22 17:54 /dev/snd/pcmC0D2c crw-rw---- 1 root root 116, 27 Sep 22 17:54 /dev/snd/pcmC0D3c crw-rw---- 1 root root 116, 20 Sep 22 17:54 /dev/snd/pcmC0D4p crw-rw---- 1 root root 116, 33 Sep 22 17:54 /dev/snd/timer !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:268: no soundcards found... ARECORD arecord: device_list:268: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [I82801DBICH4] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module usbserial video vboxdrv lcd !!ALSA/HDA dmesg !!--------------