!!################################ !!ALSA Information Script v 0.4.58 !!################################ !!Script ran on: Tue Sep 15 10:12:36 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04" !!DMI Information !!--------------- Manufacturer: Dell Inc. Product Name: Precision WorkStation 490 !!Kernel Information !!------------------ Kernel release: 2.6.28-15-generic Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18rc3 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfbffc000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 631xESB/632xESB High Definition Audio Controller (rev 09) 0c:02.0 Multimedia controller: PLX Technology, Inc. PCI9056 32-bit 66MHz PCI <-> IOBus Bridge !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:269a (rev 09) Subsystem: 1028:01c1 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: SigmaTel STAC9200 Address: 0 Vendor Id: 0x83847690 Subsystem Id: 0x102801c1 Revision Id: 0x102201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 GPIO: io=4, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0xd0401: Stereo Converter: stream=5, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x0a Processing caps: benign=0, ncoeff=0 Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Connection: 1 0x08 Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x1e0]: 44100 48000 88200 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Delay: 3 samples Node 0x07 [Audio Selector] wcaps 0x300901: Stereo R/L Connection: 3 0x02* 0x08 0x0a Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x00010024: IN EAPD Detect EAPD 0x0: Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Delay: 3 samples Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x400001f1: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 2 0x05* 0x0a Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x09 0x09] Connection: 1 0x0c Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x1f 0x1f] Connection: 1 0x07 Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 5 0x10* 0x0f 0x0e 0x0d 0x12 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=30, enabled=1 Connection: 1 0x0b Node 0x0e [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000003f: IN OUT HP Detect Trigger ImpSense Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01813020: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x10 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02a19021: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00] Pincap 0x00000010: OUT Pin Default 0x90100140: [Fixed] Speaker at Int N/A Conn = Unknown, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x13 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x400001f2: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x13 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00] --endcollapse-- !!ALSA Device nodes !!----------------- !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module Dta1xx binfmt_misc bridge stp bnep input_polldev video output coretemp lp arc4 ecb snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer rtl8187 snd_seq_device mac80211 iTCO_wdt snd iTCO_vendor_support eeprom_93cx6 soundcore ppdev pcspkr psmouse serio_raw dcdbas i5000_edac nvidia shpchp snd_page_alloc parport_pc parport cfg80211 edac_core agpgart tg3 fbcon tileblit font bitblit softcursor !!ALSA/HDA dmesg !!------------------ [ 11.256291] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 11.401699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.401789] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.465284] phy0: Selected rate control algorithm 'pid'