!!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Sun Feb 26 15:53:33 UTC 2012 !!Linux Distribution !!------------------ Gentoo Base System release 2.0.3 !!DMI Information !!--------------- Manufacturer: ASUSTeK Computer INC. Product Name: A7N8X2.0 Product Version: REV 2.xx !!Kernel Information !!------------------ Kernel release: 2.6.29-gentoo-r5 Operating System: GNU/Linux Architecture: i686 Processor: AMD Athlon(tm) XP 2500 SMP Enabled: No !!ALSA Version !!------------ Driver version: 1.0.18a Library version: 1.0.24.1 Utilities version: 1.0.24.2 !!Loaded ALSA modules !!------------------- snd_intel8x0 snd_mpu401 !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [nForce2 ]: NFORCE - NVidia nForce2 NVidia nForce2 with ALC650F at irq 22 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2) 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:05.0 0401: 10de:006b (rev a2) Subsystem: 1043:0c11 -- 00:06.0 0401: 10de:006a (rev a1) Subsystem: 1043:8095 !!Loaded sound module options !!-------------------------- !!Module: snd_intel8x0 ac97_clock : 0 ac97_quirk : buggy_irq : Y buggy_semaphore : N enable : N id : index : -1 joystick : 0 spdif_aclink : 0 xbox : N !!Module: snd_mpu401 enable : Y,N,N,N,N,N,N,N id : ,,,,,,, index : -2,-2,-2,-2,-2,-2,-2,-2 irq : 10,65535,65535,65535,65535,65535,65535,65535 pnp : Y,Y,Y,Y,Y,Y,Y,Y port : 816,1,1,1,1,1,1,1 uart_enter : Y,Y,Y,Y,Y,Y,Y,Y !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Realtek ALC650F PCI Subsys Vendor: 0x1043 PCI Subsys Device: 0x8095 Capabilities : DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Double rate slots: 10/11 Extended ID : codec=0 rev=1 LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : SPCV LDAC SDAC CDAC SPDIF=10/11 VRA PCM front DAC : 48000Hz PCM Surr DAC : 48000Hz PCM LFE DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Copyright Category=0x22 Generation=1 Rate=48kHz SPDIF In Status : Not Locked 0:00 = 5980 0:02 = 9f1f 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 05c7 0:2a = 05f1 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 9f80 0:38 = 9f9f 0:3a = 2a20 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0025 0:70 = 0231 0:72 = 00a0 0:74 = 0043 0:76 = 0001 0:78 = 8102 0:7a = 57c3 0:7c = 414c 0:7e = 4720 --endcollapse-- !!ALSA Device nodes !!----------------- total 0 drwxr-xr-x 2 root root 60 Feb 26 10:48 . drwxr-xr-x 3 root root 60 Feb 26 10:48 .. lrwxrwxrwx 1 root root 15 Feb 26 10:48 pci-0000:00:06.0 -> ../../controlC0 !!Aplay/Arecord output !!------------ APLAY aplay: device_list:240: no soundcards found... ARECORD arecord: device_list:240: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [nForce2] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [UART] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module autofs4 nfsd lockd sunrpc ipv6 snd_seq_midi snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss rfcomm sco bnep l2cap usbhid btusb bluetooth nvidia snd_wavefront firmware_class snd_cs4232 snd_wss_lib snd_intel8x0 snd_opl3_lib ohci_hcd snd_ac97_codec snd_hwdep 3c59x snd_mpu401 ac97_bus thermal ehci_hcd mii snd_mpu401_uart snd_pcm processor nvidia_agp rtc_cmos snd_rawmidi agpgart snd_timer rtc_core thermal_sys i2c_nforce2 usbcore snd_seq_device i2c_core snd rtc_lib button pcspkr snd_page_alloc sg !!ALSA/HDA dmesg !!------------------