!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Thu Mar 26 20:45:16 UTC 2009 !!Linux Distribution !!------------------ Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) !!Kernel Information !!------------------ Kernel release: 2.6.27.19-170.2.35.fc10.x86_64 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.19 Library version: 1.0.19 Utilities version: 1.0.19 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes aRts: Installed - Yes (/usr/bin/artsd) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfce78000 irq 21 !!PCI Soundcards installed in the system !!-------------------------------------- 00:07.0 Audio device: nVidia Corporation Device 0774 (rev a1) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:07.0 0403: 10de:0774 (rev a1) Subsystem: 10de:cb84 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,, position_fix : 0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1 probe_only : N,N,N,N,N,N,N,N single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Nvidia MCP78 HDMI Address: 3 Vendor Id: 0x10de0002 Subsystem Id: 0x10de0101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x18560110: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560121: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560122: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560123: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x3 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560124: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x4 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0c --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 0 Mar 26 06:12 /dev/snd/controlC0 crw-rw---- 1 root root 116, 7 Mar 26 06:12 /dev/snd/hwC0D3 crw-rw---- 1 root root 116, 19 Mar 26 15:44 /dev/snd/pcmC0D3p crw-rw---- 1 root root 116, 33 Mar 26 06:12 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # ~/.asoundrc or /etc/asound.conf # ALSA configuration file ##### USAGE ##### # Save this file as "~/.asoundrc" (for user-specific sound configuration) or # "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA # device names ad described in the next section. ##### DEVICE NAMES ##### # This configuration file defines four devices for use by the user. Those # devices are "analog", "mixed-analog", "digital", and "mixed-digital". The # user may also re-define "default" to be identical to one of the above-named # devices (i.e. to send all sound output to the digital output unless otherwise # specified). Use the device names as described below: # - "analog" outputs to the analog output directly and (at least on software # sound cards) blocks other audio output. After playback completes, "queued" # sounds are output in sequence. # - "mixed-analog" mixes audio output from multiple programs into the analog # output (so you can hear beeps, alerts, and other noises while playing back # an audio stream). # - "digital" outputs to the digital output directly. Since most (all?) # digital outputs expect 48kHz PCM audio, this may not work for some playback # (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV # recordings, etc.). # - "mixed-digital" # All other devices created within this file are used only by the configuration # file itself and should /not/ be used directly. In other words, do not use # the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital". ##### IMPORTANT ##### # To make this ALSA configuration file work with your sound card, you will need # to define the appropriate card and device information for the "analog-hw" and # "digital-hw" devices below. You can find the card and device information # using "aplay -l". ##### Configuration File ##### # Override the default output used by ALSA. If you do not override the # default, your default device is identical to the (unmixed) "analog" device # shown below. If you prefer mixed and/or digital output, uncomment the # appropriate four lines below (only one slave.pcm line). # # Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified # such that their default "default" device is identical to the "mixed-analog" # device. Whether using an ALSA version before or after 1.0.9, it does no harm # and has no affect on performance to redefine the device (even if the # redefinition does not change anything). Also, by using this ALSA # configuration file, you once again have access to unmixed analog output using # the "analog" device. pcm.!default { type plug ## Uncomment the following to use (unmixed) "analog" by default # slave.pcm "analog-hw" ## Uncomment the following to use "mixed-analog" by default # slave.pcm "dmix-analog" ## Uncomment the following to use (unmixed) "digital" by default slave.pcm "digital-hw" ## Uncomment the following to use "mixed-digital" by default # slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.!default { type hw card 0 } # Alias for (converted) analog output on the card # - This is identical to the device named "default"--which always exists and # refers to hw:0,0 (unless overridden) # - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog # output on the card # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is different from "default" and # allows playback while blocking other sound sources (until playback # completes). pcm.analog { type plug slave.pcm "analog-hw" } # Control device (mixer, etc.) for the card ctl.analog { type hw card 0 } # Alias for (converted) mixed analog output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the dmix plugin (in this case 48000Hz) # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is identical to "default" for # "software" sound cards. pcm.mixed-analog { type plug slave.pcm "dmix-analog" } # Control device (mixer, etc.) for the card ctl.mixed-analog { type hw card 0 } # Alias for (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.digital { type plug slave.pcm "digital-hw" } # Control device (mixer, etc.) for the card ctl.digital { type hw card 0 } # Alias for mixed (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.mixed-digital { type plug slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.mixed-digital { type hw card 0 } # The following devices are not useful by themselves. They require specific # rates, channels, and formats. Therefore, you probably do not want to use # them directly. Instead use of of the devices defined above. # Alias for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.analog-hw { type hw card 0 # The default value for device is 0, so no need to specify # - Uncomment one of the below or create a new "device N" line as appropriate # for your sound card or # device 1 # device 4 } # Control device (mixer, etc.) for the card ctl.analog-hw { type hw card 0 } # Alias for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.digital-hw { type hw card 0 device 3 # - Comment out "device 1" above and uncomment one of the below or create a # new "device N" line as appropriate for your sound card or # device 2 # device 4 } # Control device (mixer, etc.) for the card ctl.digital-hw { type hw card 0 } # Direct software mixing plugin for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-analog { type dmix ipc_key 1234 slave { pcm "analog-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-analog { type hw card 0 } # Direct software mixing plugin for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-digital { type dmix ipc_key 1235 slave { pcm "digital-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-digital { type hw card 0 } !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Card hw:0 'NVidia'/'HDA NVidia at 0xfce78000 irq 21' Mixer name : 'Nvidia MCP78 HDMI' Components : 'HDA:10de0002,10de0101,00100000' Controls : 4 Simple ctrls : 1 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!Alsactl output !!------------- --startcollapse-- state.NVidia { control.1 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.2 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.3 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.4 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } } --endcollapse-- !!All Loaded Modules !!------------------ Module sit tunnel4 fuse ipv6 jfs dm_multipath uinput snd_hda_codec_nvhdmi snd_hda_intel snd_hda_codec snd_hwdep nvidia snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc i2c_core 3c59x pcspkr shpchp mii sky2 k8temp hwmon wmi pata_amd ata_generic pata_acpi