!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Tue May 12 19:49:04 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04" !!Kernel Information !!------------------ Kernel release: 2.6.28-11-generic Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18rc3 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_usb_audio !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 1 [Device ]: USB-Audio - USB Audio Device USB Audio Device at usb-0000:00:1d.1-1, full speed !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:293e (rev 02) Subsystem: 17aa:3038 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_usb_audio async_unlink : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 nrpacks : 8 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 5 May 12 16:39 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 4 May 12 16:39 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 3 May 12 16:39 /dev/snd/seq crw-rw---- 1 root audio 116, 2 May 12 16:39 /dev/snd/timer !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 1: Device [USB Audio Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 1 [Device] Card hw:1 'Device'/'USB Audio Device at usb-0000:00:1d.1-1, full speed' Mixer name : 'USB Mixer' Components : 'USB0e6a:0310' Controls : 2 Simple ctrls : 1 Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 30 Mono: Front Left: Playback 30 [100%] [12.00dB] [on] Front Right: Playback 30 [100%] [12.00dB] [on] !!Alsactl output !!------------- --startcollapse-- state.Device { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'PCM Playback Switch' value true } control.2 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 30' comment.dbmin -1800 comment.dbmax 1200 iface MIXER name 'PCM Playback Volume' value.0 30 value.1 30 } } --endcollapse-- !!All Loaded Modules !!------------------ Module vmnet vmci vmmon i915 drm bridge stp bnep input_polldev video output ipt_LOG ipt_addrtype xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_limit iptable_filter ip_tables x_tables lp snd_usb_audio snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_usb_lib snd_hwdep snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse ppdev intel_agp agpgart snd_timer snd_seq_device heci serio_raw parport_pc parport usbhid iTCO_wdt iTCO_vendor_support snd soundcore floppy e1000e fbcon tileblit font bitblit softcursor