!!################################
!!ALSA Information Script v 0.4.59
!!################################

!!Script ran on: Wed Oct 27 07:21:12 UTC 2010


!!Linux Distribution
!!------------------

Fedora release 12 (Constantine) Fedora release 12 (Constantine) Fedora release 12 (Constantine) Fedora release 12 (Constantine)


!!DMI Information
!!---------------

Manufacturer:              
Product Name:              


!!Kernel Information
!!------------------

Kernel release:    2.6.32.21-168.fc12.x86_64
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         x86_64
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     1.0.21
Library version:    1.0.23
Utilities version:  1.0.23


!!Loaded ALSA modules
!!-------------------



!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - Yes

aRts:
      Installed - Yes (/usr/bin/artsd)
      Running - No

Jack:
      Installed - Yes (/usr/bin/jackd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------

--- no soundcards ---


!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)


!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------

00:1b.0 0403: 8086:27d8 (rev 01)
	Subsystem: 8086:0202


!!Modprobe options (Sound related)
!!--------------------------------

snd-hda-intel: enable_msi=1
snd-hda-intel: model=auto
snd_hda_intel: power_save=0


!!Loaded sound module options
!!--------------------------


!!ALSA Device nodes
!!-----------------

crw-rw----  1 root audio 116, 3 Oct 27 12:34 /dev/snd/seq
crw-rw----  1 root audio 116, 2 Oct 27 12:34 /dev/snd/timer


!!ALSA configuration files
!!------------------------

!!System wide config file (/etc/asound.conf)

#
# Place your global alsa-lib configuration here...
#

@hooks [
	{
		func load
		files [
			"/etc/alsa/pulse-default.conf"
		]
		errors false
	}
]


!!Aplay/Arecord output
!!------------

APLAY

aplay: device_list:235: no soundcards found...

ARECORD

arecord: device_list:235: no soundcards found...

!!Amixer output
!!-------------


!!Alsactl output
!!-------------

--startcollapse--
--endcollapse--


!!All Loaded Modules
!!------------------

Module
snd_pcm_oss
snd_mixer_oss
snd_hdspm
snd_rawmidi
pppoe
pppox
ppp_generic
slhc
nls_utf8
fuse
sunrpc
p4_clockmod
freq_table
speedstep_lib
nf_conntrack_ftp
ip6t_REJECT
nf_conntrack_ipv6
ip6table_filter
ip6_tables
ipv6
dm_multipath
uinput
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_seq
snd_seq_device
snd_pcm
snd_timer
snd
ppdev
iTCO_wdt
e100
soundcore
parport_pc
iTCO_vendor_support
snd_page_alloc
parport
mii
i2c_i801
i915
drm_kms_helper
drm
i2c_algo_bit
i2c_core
video
output


!!ALSA/HDA dmesg
!!------------------

  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 27 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_intel.c:686: No response from codec, disabling MSI: last cmd=0x200f0000
ALSA sound/pci/hda/hda_intel.c:701: azx_get_response timeout, switching to polling mode: last cmd=0x200f0000
ALSA sound/pci/hda/hda_intel.c:1389: Codec #2 probe error; disabling it...
ALSA sound/pci/hda/hda_intel.c:725: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x200f0000
ALSA sound/pci/hda/hda_intel.c:761: get_response timeout: IRS=0x1
ALSA sound/pci/hda/hda_intel.c:789: send_cmd timeout: IRS=0x1, val=0x200f0000
ALSA sound/pci/hda/hda_intel.c:789: send_cmd timeout: IRS=0x1, val=0x200f0001
ALSA sound/pci/hda/hda_intel.c:789: send_cmd timeout: IRS=0x1, val=0x200f0002
ALSA sound/pci/hda/hda_intel.c:789: send_cmd timeout: IRS=0x1, val=0x200f0004
ALSA sound/pci/hda/hda_intel.c:1415: no codecs initialized
HDA Intel 0000:00:1b.0: PCI INT A disabled
device-mapper: multipath: version 1.1.0 loaded