!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Sun May 31 01:53:15 UTC 2009 !!Linux Distribution !!------------------ Welcome to openSUSE 11.1 - Kernel \r (\l). openSUSE 11.1 (i586) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-ia32:core-3.2-ia32" !!Kernel Information !!------------------ Kernel release: 2.6.27.21-0.1-default Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: Utilities version: 1.0.20 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_usb_audio !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No aRts: Installed - Yes (/opt/kde3/bin/artsd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xefffc000 irq 16 1 [U0x46d0x8da ]: USB-Audio - USB Device 0x46d:0x8da USB Device 0x46d:0x8da at usb-0000:00:1d.7-4.4, full speed !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:27d8 (rev 01) Subsystem: 1028:01d2 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!Module: snd_usb_audio async_unlink : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 nrpacks : 8 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: SigmaTel STAC9221 A1 Address: 0 Vendor Id: 0x83847680 Subsystem Id: 0x102801ab Revision Id: 0x103201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=4, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x17 Processing caps: benign=0, ncoeff=0 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x18 Processing caps: benign=0, ncoeff=0 Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Connection: 1 0x11 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02214030: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01a19021: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=01, enabled=1 Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01111012: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01114010: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00000024: IN Detect Pin Default 0x02a19020: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=02, enabled=1 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000037: IN OUT Detect Trigger ImpSense Pin Default 0x01117011: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Yellow DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 3 0x08* 0x17 0x19 Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x00010024: IN EAPD Detect EAPD 0x0: Pin Default 0x400001f1: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Delay: 3 samples Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x01813122: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono Volume-Knob: delta=1, steps=127, direct=1, val=127 Connection: 4 0x02* 0x03 0x04 0x05 Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x12 Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x13 Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Delay: 3 samples Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 Delay: 3 samples Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x400001f2: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x00: Connection: 1 0x1a --endcollapse-- !!ALSA Device nodes !!----------------- !!Aplay/Arecord output !!------------ APLAY aplay: device_list:223: no soundcards found... ARECORD arecord: device_list:223: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [U0x46d0x8da] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module rfkill_input binfmt_misc radeon drm af_packet microcode cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq speedstep_lib fuse loop dm_mod snd_usb_audio snd_usb_lib quickcam_messenger snd_rawmidi usbvideo snd_seq_device arc4 ecb crypto_blkcipher b43legacy rfkill mac80211 cfg80211 led_class gspca_zc3xx input_polldev snd_hda_intel gspca_main iTCO_wdt e100 iTCO_vendor_support 3c59x ssb intel_agp snd_pcm mii usb_storage sr_mod joydev button videodev i2c_i801 agpgart dcdbas pcmcia cdrom v4l1_compat pcspkr snd_timer rtc_cmos pcmcia_core i2c_core snd_page_alloc rtc_core serio_raw snd_hwdep rtc_lib snd soundcore sg usbhid hid ff_memless uhci_hcd ehci_hcd sd_mod crc_t10dif usbcore edd ext3 mbcache jbd fan ide_pci_generic piix ide_core ata_generic ata_piix libata scsi_mod dock thermal processor thermal_sys hwmon