!!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Wed May 26 12:44:07 UTC 2010 !!Linux Distribution !!------------------ Fedora release 12 (Constantine) Fedora release 12 (Constantine) Fedora release 12 (Constantine) Fedora release 12 (Constantine) !!DMI Information !!--------------- Manufacturer: System manufacturer Product Name: System Product Name !!Kernel Information !!------------------ Kernel release: 2.6.32.11-99.fc12.i686 Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.21 Library version: Utilities version: 1.0.22 !!Loaded ALSA modules !!------------------- snd_mpu401 !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes aRts: Installed - Yes (/usr/bin/artsd) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) 04:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 04:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 04:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 04:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:10.1 0403: 10de:026c (rev a2) Subsystem: 1043:81cb !!Loaded sound module options !!-------------------------- !!Module: snd_mpu401 enable : Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2 irq : 10,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535 pnp : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y port : 816,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 uart_enter : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 3 May 26 22:41 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 2 May 26 22:41 /dev/snd/midiC1D0 crw-rw---- 1 root audio 116, 5 May 26 22:41 /dev/snd/seq crw-rw---- 1 root audio 116, 4 May 26 22:41 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 1 [UART] Card hw:1 'UART'/'MPU-401 UART at 0x330, irq 10' Mixer name : '' Components : '' Controls : 0 Simple ctrls : 0 !!Alsactl output !!------------- --startcollapse-- state.UART { control { } } --endcollapse-- !!All Loaded Modules !!------------------ Module nls_utf8 udf fuse ipv6 cpufreq_ondemand powernow_k8 reiserfs ext2 dm_multipath uinput mt352 dvb_bt8xx snd_hda_intel dvb_core snd_cs4236 bt878 snd_wss_lib bttv ppdev snd_hda_codec snd_opl3_lib v4l2_common parport_pc videodev forcedeth snd_hwdep nvidia snd_seq v4l1_compat ir_common i2c_algo_bit videobuf_dma_sg i2c_nforce2 snd_pcm snd_timer videobuf_core btcx_risc tveeprom parport rt2870sta i2c_core serio_raw snd_mpu401 snd_page_alloc snd_mpu401_uart k8temp snd_rawmidi snd_seq_device snd soundcore ns558 asus_atk0110 gameport firewire_ohci ata_generic firewire_core crc_itu_t pata_acpi sata_nv pata_amd !!ALSA/HDA dmesg !!------------------ ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22 HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22 hda_intel: Disable MSI for Nvidia chipset HDA Intel 0000:00:10.1: setting latency timer to 64 ALSA sound/pci/hda/hda_intel.c:698: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 ALSA sound/pci/hda/hda_intel.c:1385: Codec #0 probe error; disabling it... ALSA sound/pci/hda/hda_intel.c:722: hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0000 ALSA sound/pci/hda/hda_intel.c:758: get_response timeout: IRS=0x0 ALSA sound/pci/hda/hda_intel.c:758: get_response timeout: IRS=0x0 ALSA sound/pci/hda/hda_intel.c:758: get_response timeout: IRS=0x0 ALSA sound/pci/hda/hda_intel.c:758: get_response timeout: IRS=0x0 ALSA sound/pci/hda/hda_intel.c:758: get_response timeout: IRS=0x0 ALSA sound/pci/hda/hda_intel.c:1411: no codecs initialized HDA Intel 0000:00:10.1: PCI INT B disabled device-mapper: multipath: version 1.1.0 loaded