!!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Sun Nov 6 14:45:02 UTC 2011 !!Linux Distribution !!------------------ Ubuntu 10.10 \n \l DISTRIB_ID=Ubuntu !!DMI Information !!--------------- Manufacturer: Gigabyte Technology Co., Ltd. Product Name: EP35C-DS3R Product Version: !!Kernel Information !!------------------ Kernel release: 2.6.35-30-generic-pae Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.24.1 Utilities version: 1.0.24.2 !!Loaded ALSA modules !!------------------- snd_ca0106 snd_hda_intel !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [CA0106 ]: CA0106 - CA0106 Audigy SE [SB0570] at 0xd000 irq 19 1 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xf5010000 irq 45 !!PCI Soundcards installed in the system !!-------------------------------------- 01:00.1 Audio device: ATI Technologies Inc HD48x0 audio 05:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 01:00.1 0403: 1002:aa30 Subsystem: 174b:aa30 -- 05:01.0 0401: 1102:0007 Subsystem: 1102:100a !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-caiaq: index=-2 snd-usb-ua101: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 snd-usb-audio: index=-2 snd-hda-intel: power_save=0 !!Loaded sound module options !!-------------------------- !!Module: snd_ca0106 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 subsystem : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100100 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Device: name="HDMI 0", type="HDMI", device=3 Converter: stream=0, channel=0 Digital: Digital category: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=03, enabled=1 Connection: 1 0x02 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 11 Nov 6 16:40 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 14 Nov 6 16:40 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 13 Nov 6 16:40 /dev/snd/hwC1D0 crw-rw---- 1 root audio 116, 2 Nov 6 16:40 /dev/snd/midiC0D0 crw-rw---- 1 root audio 116, 10 Nov 6 16:40 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 9 Nov 6 16:42 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 8 Nov 6 16:40 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 7 Nov 6 16:42 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 6 Nov 6 16:40 /dev/snd/pcmC0D2c crw-rw---- 1 root audio 116, 5 Nov 6 16:42 /dev/snd/pcmC0D2p crw-rw---- 1 root audio 116, 4 Nov 6 16:40 /dev/snd/pcmC0D3c crw-rw---- 1 root audio 116, 3 Nov 6 16:40 /dev/snd/pcmC0D3p crw-rw---- 1 root audio 116, 12 Nov 6 16:40 /dev/snd/pcmC1D3p crw-rw---- 1 root audio 116, 1 Nov 6 16:40 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Nov 6 16:40 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 6 16:40 . drwxr-xr-x 3 root root 360 Nov 6 16:40 .. lrwxrwxrwx 1 root root 12 Nov 6 16:40 pci-0000:01:00.1 -> ../controlC1 lrwxrwxrwx 1 root root 12 Nov 6 16:40 pci-0000:05:01.0 -> ../controlC0 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) pcm.!dmix { type plug slave { pcm surround51 channels 6 } } pcm.!default { type plug slave.pcm "dmix" slave.channels 6 route_policy duplicate } !!System wide config file (/etc/asound.conf) # vim:set ft=alsaconf noet ts=8 sw=2: # Updated 090117 notes {at} notes.for.sabi.co.UK # # Syntax (somewhat) described in these links: # http://ALSA-project.org/alsa-doc/alsa-lib/conf.html # http://ALSA-project.org/alsa-doc/alsa-lib/confarg.html # http://ALSA-project.org/alsa-doc/alsa-lib/conffunc.html # http://ALSA-project.org/alsa-doc/alsa-lib/confhooks.html # In this file I use a style similar to the one I use for CSS style sheets. # It may also help to read: # http://WWW.sabi.co.UK/Notes/linuxSoundALSA.html # Also check carefully the contents of '/usr/share/alsa/alsa.conf', # especially for the one liners defining standard device names # and attributess, or the output of 'arecord -L' or 'aplay -L'. # The device names "default", "dsp0", "mixer0" have special meanings. # Standard channel number assignments: # 0 front left 1 front right, # 2 rear left 3 rear right # 4 center 5 lfe/subwoofer # 6 side left 7 side right ######################################################################## # Read very carefully the ALSA PCM plugin page at: # http://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html # For the 'asym', 'dsnoop', 'dmix' plugins also read: # http://ALSA.OpenSrc.org/index.php/Asym # http://ALSA.OpenSrc.org/index.php/Dsnoop # http://ALSA.OpenSrc.org/index.php/Dmix # http://ALSA.OpenSrc.org/index.php/How_to_use_softvol_to_control_the_master_volume pcm.c20 { @args [ CARD ] @args.CARD { type string; default "0"; } type hw; card $CARD; } pcm.c40 = pcm.surround40; pcm.c51 = pcm.surround51; pcm.dsp { @args [ SNOOP MIX ] @args.SNOOP { type string; } @args.MIX { type string; } type asym; capture.pcm $SNOOP; playback.pcm $MIX; } pcm.rec { @args [ KEY PCM ] @args.KEY { type integer; } @args.PCM { type string; } type dsnoop; ipc_key $KEY; slave.pcm $PCM; } pcm.iec { @args [ PCM ] @args.PCM { type string; } type iec958; slave.pcm $PCM; } # For Tribes 2, which has the channels reversed. # http://home.Erin.UToronto.CA/~jbonham/tribes2-alsa.html pcm.swap { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; ttable.0.1 1; ttable.1.0 1; } # Buffering (period time defaults to 125000 usecs). # Size of period, expressed either in usec or byte units: # period_time USECS # period_size BYTES # Size of buffers, expressed either in period, usec, or byte units: # periods PERIODS # buffer_time USECS # buffer_size BYTES # The ALSA docs have examples with 'period_time' set to 0, when # 'period_size' and 'buffer_size' are used instead, but this can # cause trouble in later releases of ALSA. # For OSS compatibility, 'period_size' and 'buffer_size' should # be powers of 2. Also, many cards cannot accept a 'period_size' # much greater than 4096, so 4096 is mostly safe. Some like the # nForce 8x0 compatibles require a smaller one still. # On my VIA 8233A, any value for 'period_time' greater than # 85333 usecs (precisely!) causes hiccups in sound output. # Why? At 48kHz, 85333 usec are just over 4096 bytes/channel. pcm_slave.dmix-slave { @args [ CHAN PCM RATE PSIZE BSIZE PTIME BTIME ] @args.CHAN { type integer; } @args.PCM { type string; } @args.RATE { type integer; default 48000; } @args.PSIZE { type integer; default 4096; } @args.BSIZE { type integer; default 40960; } @args.PTIME { type integer; default 84000; } @args.BTIME { type integer; default 840000; } pcm $PCM; rate $RATE; period_time $PTIME; buffer_time $BTIME; period_size $PSIZE; buffer_size $BSIZE; channels $CHAN; } # 2/4/6 CHANNEL SW SHARING # ######################## pcm.dmix-20 { @args [ KEY PCM RATE PSIZE BSIZE PTIME BTIME ] @args.KEY { type integer; } @args.PCM { type string; } @args.RATE { type integer; default 48000; } @args.PSIZE { type integer; default 4096; } @args.BSIZE { type integer; default 40960; } @args.PTIME { type integer; default 84000; } @args.BTIME { type integer; default 840000; } type dmix; ipc_key $KEY; # slave { @func concat # strings [ "dmix-slave:2," $PCM "," $RATE "," # $PSIZE "," $BSIZE "," $PTIME "," $BTIME ] }; slave { pcm $PCM; rate $RATE; period_time $PTIME; buffer_time $BTIME; period_size $PSIZE; buffer_size $BSIZE; channels 2; } bindings.0 0; bindings.1 1; } pcm.dmix-40 { @args [ KEY PCM RATE PSIZE BSIZE PTIME BTIME ] @args.KEY { type integer; } @args.PCM { type string; } @args.RATE { type integer; default 48000; } @args.PSIZE { type integer; default 4096; } @args.BSIZE { type integer; default 40960; } @args.PTIME { type integer; default 84000; } @args.BTIME { type integer; default 840000; } type dmix; ipc_key $KEY; # slave { @func concat # strings [ "dmix-slave:4," $PCM "," $RATE "," # $PSIZE "," $BSIZE "," $PTIME "," $BTIME ] }; slave { pcm $PCM; rate $RATE; period_time $PTIME; buffer_time $BTIME; period_size $PSIZE; buffer_size $BSIZE; channels 4; } bindings.0 0; bindings.1 1; bindings.2 2; bindings.3 3; } pcm.dmix-51 { @args [ KEY PCM RATE PSIZE BSIZE PTIME BTIME ] @args.KEY { type integer; } @args.PCM { type string; } @args.RATE { type integer; default 48000; } @args.PSIZE { type integer; default 4096; } @args.BSIZE { type integer; default 40960; } @args.PTIME { type integer; default 84000; } @args.BTIME { type integer; default 840000; } type dmix; ipc_key $KEY; # slave { @func concat # strings [ "dmix-slave:6," $PCM "," $RATE "," # $PSIZE "," $BSIZE "," $PTIME "," $BTIME ] }; slave { pcm $PCM; rate $RATE; period_time $PTIME; buffer_time $BTIME; period_size $PSIZE; buffer_size $BSIZE; channels 6; } bindings.0 0; bindings.1 1; bindings.2 2; bindings.3 3; bindings.4 4; bindings.5 5; } # 4/6 CHANNEL AS STEREO # ##################### # Distribute 2 channel stereo to 4 or 5.1 surround channels # 'surround40' and 'surround51' should be predefined. # http://ALSA.OpenSrc.org/index.php?page=FAQ028 # http://ALSA.OpenSrc.org/index.php?page=SurroundSound # 'table.X.Y Z' means add channel 'X' multiplied by 'Z' to 'Y'. # Does not support sharing, stack 'dmix' for that. # Note that all (some?) USB sound device config do not define the # 'surroundXY' style name, so substitute the equivalent 'hw' name. pcm.stereo-40 { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; slave.channels 4; ttable.0.0 1.0; ttable.0.2 0.6; ttable.1.1 1.0; ttable.1.3 0.6; } pcm.stereo-51 { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; slave.channels 6; ttable.0.0 1.0; ttable.0.2 0.6; ttable.0.4 0.3; ttable.0.5 0.3; ttable.1.1 1.0; ttable.1.3 0.6; ttable.1.4 0.3; ttable.1.5 0.3; } # 4 CHANNEL AS 2 STEREO # ##################### # Using one four channel card as two stereo cards. # http://ALSA.OpenSrc.org/index.php?page=.asoundrc # Note that all (some?) USB sound device config do not define the # 'surroundXY' style name, so substitute the equivalent 'hw' name. pcm.card-f { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; slave.channels 2; ttable.0.0 1.0; ttable.1.1 1.0; } # Note that all (some?) USB sound device config do not define the # 'surroundXY' style name, so substitute the equivalent 'hw' name. pcm.card-r { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; slave.channels 4; ttable.0.2 1.0; ttable.1.3 1.0; } pcm.card-s { @args [ PCM ] @args.PCM { type string; } type route; slave.pcm $PCM; slave.channels 8; ttable.0.6 1.0; ttable.1.7 1.0; } pcm.soft { @args [ CARD CTL PCM ] @args.CARD { type string; default "0"; } @args.CTL { type string; default "Master"; } @args.PCM { type string; } type softvol; slave.pcm $PCM; control { name $CTL; card $CARD; } } ######################################################################## # The top level shared pseudo device, with both PCM and CTL interfaces # The ALSA default is "default", but many programs like XMMS and 'aoss' # assume "dsp0" as default name for PCM and "mixer0" for CTL. # Amazingly, XMMS has problems if one defines 'pcm.dsp0' to be # 'plug' for 'pcm.asym0' and not directly as 'asym'. ctl.!default = ctl.dsp0; pcm.!default = pcm.dsp0; ctl.pulse { type pulse; } pcm.pulse { type pulse; } ######################################################################## # The two detailed card configurations are for generic 2 to 5.1 channel # chipsets. It is assumed that both cards need software sharing, and can # only natively handle 48000Hz. # These assumptions are fairly typical of recent (2004) low end and # on-motherboard cards and chipsets, and their configs are not really # specific to either models. ######################################################################## ctl.dmixer { type hw; card 0 } pcm.dmixer { type dmix ipc_key 1024 slave { pcm "hw:0,0" period_time 0 period_size 1024 buffer_size 4096 rate 44100 } bindings { 0 0 1 1 } } # CARD 0 DEVICES # ############## ctl.card0 { type hw; card 0; } pcm.card0 { type hw; card 0; } pcm.dsnoop0 = "rec:23760,card0"; ctl.dmix0 = ctl.card0; pcm.dmix0 = "dmix-20:13760,card0,48000"; ctl.mixer0 = ctl.card0; ctl.dsp0 = ctl.card0; pcm.dsp0 = "dsp:dsnoop0,dmix0"; ctl.dmix0-rev = ctl.card0; pcm.dmix0-rev = "swap:dmix0"; ctl.stereo0-40 = ctl.card0; pcm.stereo0-40 = "stereo-40:surround40:0"; ctl.stereo0-51 = ctl.card0; pcm.stereo0-51 = "stereo-51:surround51:0"; ctl.digi0 = ctl.card0; pcm.digi0 = "iec:hw:0,2"; ctl.card0-f = ctl.card0; pcm.card0-f = "card-f:dsp0"; ctl.card0-r = ctl.card0; pcm.card0-r = "card-r:surround40:0"; ######################################################################## # CARD 1 DEVICES # ############## # For my #1 card, a CMI8738, the 'hw:1,1' device is either the # rear channels or a multi channel device depending on a mixer # control setting. ctl.card1 { type hw; card 1; } pcm.card1 { type hw; card 1; } ctl.mixer1 = ctl.card1; ctl.dsp1 = ctl.card1; pcm.dsp1 = "dsp:dsnoop1,dmix1"; pcm.dsnoop1 = "rec:29370,card1"; ctl.dmix1 = ctl.card1; pcm.dmix1 = "dmix-20:19370,card1,44100"; ctl.dmix1-rev = ctl.card1; pcm.dmix1-rev = "swap:dmix1"; ctl.stereo1-40 = ctl.card1; pcm.stereo1-40 = "stereo-40:surround40:1"; ctl.stereo1-51 = ctl.card1; pcm.stereo1-51 = "stereo-51:surround51:1"; ctl.digi1 = ctl.card1; pcm.digi1 = "iec:hw:1,2"; ctl.card1-f = ctl.card1; pcm.card1-f = "card-f:dsp1"; ctl.card1-r = ctl.card1; pcm.card1-r = "card-r:surround40:1"; ctl.card1-s = ctl.card1; pcm.card1-s = "card-s:surround71:1"; ######################################################################## # SW VOLUME CONTROL # ################# #pcm.name { type softvol; # slave STR; # control { # name STR; # [card INT;] # [iface STR;] # [index INT;] # [device INT;] # [subdevice INT;] # [count INT;] # } # } ######################################################################## # FILE OUTPUT # ########### pcm.file { @args [ PCM FILE ] @args.PCM { type string; } @args.FILE { type string; default "/tmp/alsa.raw"; } type file; file $FILE; #[format "raw";] #[perm 0600;] slave.pcm $PCM; } ctl.file0 = ctl.card0; pcm.file0 { type copy; slave.pcm "file:dsp0,/tmp/alsa0.raw"; } ctl.file1 = ctl.card1; pcm.file1 { type copy; slave.pcm "file:dsp1,/tmp/alsa1.raw"; } ########################################################################; # 2 CARDS AS 1 # ############ # Using multiple cards to simulate a single card is usually a bad idea # because they have different latencies and multichannel sound can come # out with quite a bit of skew. Some people however have a legitimate # need for this. # Using two cards as one four channel card. # http://ALSA.OpenSrc.org/index.php?page=TwoCardsAsOne ###################################### # 1st >= 2 channels, 2nd >= 2 channels ctl.multi40-22 = ctl.card0; pcm.multi-22 { @args [ PCM1 PCM2 ] @args.PCM1 { type string; } @args.PCM2 { type string; } type multi; slaves.a.pcm $PCM1; slaves.a.channels 2; slaves.b.pcm $PCM2; slaves.b.channels 2; bindings.0.slave a; bindings.0.channel 0; bindings.1.slave a; bindings.1.channel 1; bindings.2.slave b; bindings.2.channel 0; bindings.3.slave b; bindings.3.channel 1; } # Using two cards as one 5.1 channel card, the first has # 2 channels and the second has 4 channels, and viceversa. # http://ALSA.OpenSrc.org/index.php?page=TwoCardsAsOne ###################################### # 1st >= 2 channels, 2nd >= 4 channels pcm.multi51-24 { @args [ PCM1 PCM2 ] @args.PCM1 { type string; } @args.PCM2 { type string; } type multi; slaves.a.pcm $PCM1; slaves.a.channels 2; slaves.b.pcm $PCM2; slaves.b.channels 4; bindings.0.slave a; bindings.0.channel 0; bindings.1.slave a; bindings.1.channel 1; bindings.2.slave b; bindings.2.channel 0; bindings.3.slave b; bindings.3.channel 1; # Center, physically rear left, 2nd card bindings.4.slave b; bindings.4.channel 2; # LFE/subwoofer, physically rear right, 2nd card bindings.5.slave b; bindings.5.channel 3; } ###################################### # 1st >= 4 channels, 2nd >= 2 channels pcm.multi51-42 { @args [ PCM1 PCM2 ] @args.PCM1 { type string; } @args.PCM2 { type string; } type multi; # could be "dmix0" slaves.a.pcm $PCM1; slaves.a.channels 4; # could be "dmix1" slaves.b.pcm $PCM2; slaves.b.channels 2; bindings.0.slave a; bindings.0.channel 0; bindings.1.slave a; bindings.1.channel 1; bindings.2.slave a; bindings.2.channel 2; bindings.3.slave a; bindings.3.channel 3; # Center, physically front left, 2nd card bindings.4.slave b; bindings.4.channel 0; # LFE/subwoofer, physically front right, 2nd card bindings.5.slave b; bindings.5.channel 1; } !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: CA0106 [CA0106], device 0: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 1: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 2: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 3: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: CA0106 [CA0106], device 0: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 1: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 2: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CA0106 [CA0106], device 3: ca0106 [CA0106] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [CA0106] Card hw:0 'CA0106'/'Audigy SE [SB0570] at 0xd000 irq 19' Mixer name : 'CA0106' Components : '' Controls : 35 Simple ctrls : 18 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 255 Mono: Playback 153 [60%] [-25.50dB] [on] Simple mixer control 'Line in',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 255 Front Left: Capture 207 [81%] [0.00dB] Front Right: Capture 207 [81%] [0.00dB] Simple mixer control 'Mic',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 255 Front Left: Capture 0 [0%] [-99999.99dB] Front Right: Capture 0 [0%] [-99999.99dB] Simple mixer control 'Phone',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 255 Front Left: Capture 207 [81%] [0.00dB] Front Right: Capture 207 [81%] [0.00dB] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'IEC958 Center/LFE',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 207 [81%] [0.00dB] Front Right: Playback 207 [81%] [0.00dB] Simple mixer control 'IEC958 Front',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 207 [81%] [0.00dB] Front Right: Playback 207 [81%] [0.00dB] Simple mixer control 'IEC958 Rear',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 207 [81%] [0.00dB] Front Right: Playback 207 [81%] [0.00dB] Simple mixer control 'IEC958 Unknown',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 207 [81%] [0.00dB] Front Right: Playback 207 [81%] [0.00dB] Simple mixer control 'Aux',0 Capabilities: cvolume penum Capture channels: Front Left - Front Right Limits: Capture 0 - 255 Front Left: Capture 207 [81%] [0.00dB] Front Right: Capture 207 [81%] [0.00dB] Simple mixer control 'Analog Center/LFE',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 203 [80%] [-1.00dB] [on] Front Right: Playback 203 [80%] [-1.00dB] [on] Simple mixer control 'Analog Front',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 209 [82%] [0.50dB] [on] Front Right: Playback 209 [82%] [0.50dB] [on] Simple mixer control 'Analog Rear',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 198 [78%] [-2.25dB] [on] Front Right: Playback 198 [78%] [-2.25dB] [on] Simple mixer control 'Analog Side',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 187 [73%] [-5.00dB] [on] Front Right: Playback 187 [73%] [-5.00dB] [on] Simple mixer control 'Analog Source',0 Capabilities: cenum Items: 'Phone' 'Mic' 'Line in' 'Aux' Item0: 'Phone' Simple mixer control 'CAPTURE feedback',0 Capabilities: pvolume penum Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 0 [0%] [-99999.99dB] Front Right: Playback 0 [0%] [-99999.99dB] Simple mixer control 'Digital Source',0 Capabilities: cenum Items: 'IEC958 out' 'i2s mixer out' 'IEC958 in' 'i2s in' 'AC97 in' 'SRC out' Item0: 'i2s in' Simple mixer control 'Shared Mic/Line in',0 Capabilities: cenum Items: 'Line in' 'Mic in' Item0: 'Line in' !!-------Mixer controls for card 1 [HDMI] Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf5010000 irq 45' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100100' Controls : 4 Simple ctrls : 1 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] !!Alsactl output !!------------- --startcollapse-- state.CA0106 { control.1 { iface MIXER name 'Analog Front Playback Volume' value.0 209 value.1 209 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 50 dbvalue.1 50 } } control.2 { iface MIXER name 'Analog Rear Playback Volume' value.0 198 value.1 198 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 -225 dbvalue.1 -225 } } control.3 { iface MIXER name 'Analog Center/LFE Playback Volume' value.0 203 value.1 203 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 -100 dbvalue.1 -100 } } control.4 { iface MIXER name 'Analog Side Playback Volume' value.0 187 value.1 187 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 -500 dbvalue.1 -500 } } control.5 { iface MIXER name 'IEC958 Front Playback Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 0 dbvalue.1 0 } } control.6 { iface MIXER name 'IEC958 Rear Playback Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 0 dbvalue.1 0 } } control.7 { iface MIXER name 'IEC958 Center/LFE Playback Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 0 dbvalue.1 0 } } control.8 { iface MIXER name 'IEC958 Unknown Playback Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 0 dbvalue.1 0 } } control.9 { iface MIXER name 'CAPTURE feedback Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 1200 dbvalue.0 -9999999 dbvalue.1 -9999999 } } control.10 { iface PCM name 'IEC958 Playback Mask' value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 comment { access read type IEC958 count 1 } } control.11 { iface PCM name 'IEC958 Playback Mask' index 1 value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 comment { access read type IEC958 count 1 } } control.12 { iface PCM name 'IEC958 Playback Mask' index 2 value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 comment { access read type IEC958 count 1 } } control.13 { iface PCM name 'IEC958 Playback Mask' index 3 value ffffffff00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 comment { access read type IEC958 count 1 } } control.14 { iface MIXER name 'IEC958 Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface MIXER name 'Digital Source Capture Enum' value 'i2s in' comment { access 'read write' type ENUMERATED count 1 item.0 'IEC958 out' item.1 'i2s mixer out' item.2 'IEC958 in' item.3 'i2s in' item.4 'AC97 in' item.5 'SRC out' } } control.16 { iface MIXER name 'Analog Source Capture Enum' value Phone comment { access 'read write' type ENUMERATED count 1 item.0 Phone item.1 Mic item.2 'Line in' item.3 Aux } } control.17 { iface PCM name 'IEC958 Playback Default' value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.18 { iface PCM name 'IEC958 Playback Default' index 1 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.19 { iface PCM name 'IEC958 Playback Default' index 2 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.20 { iface PCM name 'IEC958 Playback Default' index 3 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.21 { iface PCM name 'IEC958 Playback PCM Stream' value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.22 { iface PCM name 'IEC958 Playback PCM Stream' index 1 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.23 { iface PCM name 'IEC958 Playback PCM Stream' index 2 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.24 { iface PCM name 'IEC958 Playback PCM Stream' index 3 value '0492100200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.25 { iface MIXER name 'Phone Capture Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 2400 dbvalue.0 0 dbvalue.1 0 } } control.26 { iface MIXER name 'Mic Capture Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 2400 dbvalue.0 -9999999 dbvalue.1 -9999999 } } control.27 { iface MIXER name 'Line in Capture Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 2400 dbvalue.0 0 dbvalue.1 0 } } control.28 { iface MIXER name 'Aux Capture Volume' value.0 207 value.1 207 comment { access 'read write' type INTEGER count 2 range '0 - 255' dbmin -9999999 dbmax 2400 dbvalue.0 0 dbvalue.1 0 } } control.29 { iface MIXER name 'Shared Mic/Line in Capture Switch' value 'Line in' comment { access 'read write' type ENUMERATED count 1 item.0 'Line in' item.1 'Mic in' } } control.30 { iface MIXER name 'Analog Front Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.31 { iface MIXER name 'Analog Rear Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.32 { iface MIXER name 'Analog Center/LFE Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.33 { iface MIXER name 'Analog Side Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.34 { iface MIXER name 'Master Playback Volume' value 153 comment { access 'read write' type INTEGER count 1 range '0 - 255' dbmin -9999999 dbmax 0 dbvalue.0 -2550 } } control.35 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } } state.HDMI { control.1 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.2 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Switch' value false comment { access 'read write' type BOOLEAN count 1 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_ca0106 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc nls_iso8859_1 nls_cp437 vfat fat binfmt_misc dm_crypt ppdev it87 hwmon_vid parport_pc fglrx psmouse coretemp aiptek serio_raw joydev lp parport dm_raid45 xor btrfs zlib_deflate crc32c libcrc32c ahci usbhid hid usb_storage libahci r8169 intel_agp pata_jmicron mii agpgart ramzswap lzo_compress !!Sysfs Files !!----------- /sys/class/sound/hwC1D0/init_pin_configs: 0x03 0x18560010 /sys/class/sound/hwC1D0/driver_pin_configs: /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: !!ALSA/HDA dmesg !!------------------ [ 15.515107] alloc kstat_irqs on node -1 [ 15.515114] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 15.515176] alloc irq_desc for 45 on node -1 [ 15.515178] alloc kstat_irqs on node -1 [ 15.515185] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 15.515208] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.735236] aiptek 3-2:1.0: Aiptek using 400 ms programming speed -- [ 2494.183470] mgui[2731]: segfault at 0 ip (null) sp bfa6077c error 14 in perl[8048000 129000] [ 5117.660888] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5117.678035] CA0106 0000:05:01.0: PCI INT A disabled [ 5117.854729] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5117.854962] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5117.854985] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5118.156877] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5121.206726] CA0106 0000:05:01.0: PCI INT A disabled [ 5121.352800] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5121.648330] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5121.648349] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5121.723813] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5121.723948] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5121.723966] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5144.133217] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5144.160210] CA0106 0000:05:01.0: PCI INT A disabled [ 5144.296395] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5144.296809] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5144.296832] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5144.380609] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5169.034856] CA0106 0000:05:01.0: PCI INT A disabled [ 5169.240713] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5169.485030] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5169.485058] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5169.562015] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5169.562213] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5169.562236] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5203.501186] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5203.531897] CA0106 0000:05:01.0: PCI INT A disabled [ 5203.731836] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5203.732189] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5203.732471] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5203.813959] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5215.418985] CA0106 0000:05:01.0: PCI INT A disabled [ 5215.605676] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5215.871573] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5215.871600] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5215.949066] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5215.949383] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5215.949408] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5217.601203] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5217.626457] CA0106 0000:05:01.0: PCI INT A disabled [ 5217.796081] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5217.796293] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5217.796315] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5217.889622] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5226.924912] CA0106 0000:05:01.0: PCI INT A disabled [ 5227.057187] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5227.283577] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5227.283595] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5227.347939] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5227.348104] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5227.348131] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5665.573362] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5665.595841] CA0106 0000:05:01.0: PCI INT A disabled [ 5665.760199] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5665.760494] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5665.760519] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5665.844550] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5668.652222] CA0106 0000:05:01.0: PCI INT A disabled [ 5668.781963] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5669.009581] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5669.009605] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5669.106547] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5669.107159] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5669.107183] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5888.288653] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5888.315563] CA0106 0000:05:01.0: PCI INT A disabled [ 5888.484740] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5888.485138] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5888.485163] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 5888.569095] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 5891.166566] CA0106 0000:05:01.0: PCI INT A disabled [ 5891.286056] HDA Intel 0000:01:00.1: PCI INT B disabled [ 5891.520458] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 5891.520480] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 5891.595003] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5891.595259] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 5891.595282] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6222.973668] HDA Intel 0000:01:00.1: PCI INT B disabled [ 6222.998918] CA0106 0000:05:01.0: PCI INT A disabled [ 6223.152957] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6223.153298] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 6223.153322] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6223.243906] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 6225.279870] CA0106 0000:05:01.0: PCI INT A disabled [ 6225.404805] HDA Intel 0000:01:00.1: PCI INT B disabled [ 6225.675484] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6225.675512] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 6225.747457] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6225.747773] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 6225.747797] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6832.600669] HDA Intel 0000:01:00.1: PCI INT B disabled [ 6832.626528] CA0106 0000:05:01.0: PCI INT A disabled [ 6832.749094] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6832.749167] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 6832.749189] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6832.827349] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 -- [ 6838.296409] CA0106 0000:05:01.0: PCI INT A disabled [ 6838.454532] HDA Intel 0000:01:00.1: PCI INT B disabled [ 6838.679128] CA0106 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6838.679152] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102 [ 6838.742463] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6838.742549] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X [ 6838.742571] HDA Intel 0000:01:00.1: setting latency timer to 64