!!################################ !!ALSA Information Script v 0.4.58 !!################################ !!Script ran on: Sun Jan 10 16:03:34 UTC 2010 !!Linux Distribution !!------------------ Welcome to openSUSE 11.2 "Emerald" - Kernel \r (\l). openSUSE 11.2 (i586) !!DMI Information !!--------------- Manufacturer: Hewlett-Packard Product Name: Presario V5000 (ET820UA#ABA) !!Kernel Information !!------------------ Kernel release: 2.6.31.5-0.1-default Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.20 Library version: Utilities version: 1.0.21 !!Loaded ALSA modules !!------------------- snd_atiixp snd_atiixp_modem !!Sound Servers on this system !!---------------------------- ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [IXP ]: ATIIXP - ATI IXP ATI IXP rev 2 with Cx20468-31 at 0xc0003400, irq 17 1 [Modem ]: ATIIXP-MODEM - ATI IXP Modem ATI IXP Modem rev 2 at 0xc0003800, irq 17 !!PCI Soundcards installed in the system !!-------------------------------------- 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:14.5 0401: 1002:4370 (rev 02) Subsystem: 103c:30ae !!Loaded sound module options !!-------------------------- !!Module: snd_atiixp ac97_clock : 48000 ac97_codec : -1 ac97_quirk : enable : N id : index : -1 spdif_aclink : Y !!Module: snd_atiixp_modem ac97_clock : 48000 enable : N id : index : -2 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Conexant Cx20468-31 PCI Subsys Vendor: 0x103c PCI Subsys Device: 0x30ae Flags: 8 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0x0000 Subsys. ID : 0x0000 Capabilities : -reserved1- -headphone out- DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=2 AMAP DSA=0 SPDIF Extended status : PRL PRK PRJ PRI SPCV SPDIF=7/8 SPDIF Control : Consumer PCM Copyright Category=0x0 Generation=0 Rate=48kHz Extended modem ID: codec=0 LIN1 Modem status : GPIO Line1 rate : 48000Hz 0:00 = 0152 0:02 = 0808 0:04 = 0808 0:06 = 0000 0:08 = 0000 0:0a = 0000 0:0c = 0000 0:0e = 0009 0:10 = 0808 0:12 = 0808 0:14 = 0000 0:16 = 0000 0:18 = 0808 0:1a = 0000 0:1c = 0808 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0a04 0:2a = 7c10 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 2000 0:3c = 0001 0:3e = 0001 0:40 = bb80 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0030 0:4e = ffff 0:50 = 0030 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0604 0:5e = a002 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0012 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 5000 0:74 = 0000 0:76 = 0000 0:78 = 0000 0:7a = 8004 0:7c = 4358 0:7e = 5430 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 5 Jan 10 10:46 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 8 Jan 10 10:46 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 4 Jan 10 10:46 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 3 Jan 10 10:46 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 7 Jan 10 10:46 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 6 Jan 10 10:46 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 9 Jan 10 10:47 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Jan 10 10:46 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Jan 10 10:46 . drwxr-xr-x 3 root root 220 Jan 10 10:47 .. lrwxrwxrwx 1 root root 12 Jan 10 10:46 pci-0000:00:14.5 -> ../controlC0 lrwxrwxrwx 1 root root 12 Jan 10 10:46 pci-0000:00:14.6 -> ../controlC1 !!Aplay/Arecord output !!------------ APLAY aplay: device_list:223: no soundcards found... ARECORD arecord: device_list:223: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [IXP] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [Modem] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module radeon drm nfs lockd fscache nfs_acl auth_rpcgss sunrpc af_packet ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter cpufreq_conservative cpufreq_userspace cpufreq_powersave ip6table_mangle powernow_k8 nf_conntrack_netbios_ns nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 ip_tables ip6table_filter ip6_tables x_tables ipv6 loop dm_mod arc4 ecb cryptomgr aead pcompress crypto_blkcipher crypto_hash crypto_algapi b43 mac80211 cfg80211 rfkill led_class ssb snd_atiixp_modem snd_atiixp pcmcia epl 8139too snd_ac97_codec ac97_bus pcmcia_core 8139cp snd_pcm pcspkr snd_timer joydev video k8temp i2c_piix4 snd sr_mod soundcore snd_page_alloc cdrom sg i2c_core output battery ac wmi button shpchp pci_hotplug ati_agp ext4 jbd2 crc16 ata_generic pata_atiixp ohci_hcd libata ehci_hcd rtc_cmos rtc_core rtc_lib fan thermal processor thermal_sys hwmon !!ALSA/HDA dmesg !!------------------ [ 6.650586] cfg80211: Calling CRDA to update world regulatory domain [ 6.658447] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.5/linux-2.6.31/sound/pci/ac97/ac97_codec.c:2163: MC'97 0 converters and GPIO not ready (0x1) [ 6.710356] b43-phy0: Broadcom 4318 WLAN found (core revision 9)