!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Tue Jun 9 11:14:55 UTC 2009 !!Linux Distribution !!------------------ Welcome to openSUSE 11.1 - Kernel \r (\l). openSUSE 11.1 (x86_64) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-x86_64:core-3.2-x86_64" !!DMI Information !!--------------- Manufacturer: System manufacturer Product Name: System Product Name !!Kernel Information !!------------------ Kernel release: 2.6.27.21-0.1-default Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_via82xx !!Sound Servers on this system !!---------------------------- ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No aRts: Installed - Yes (/opt/kde3/bin/artsd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [V8237 ]: VIA8237 - VIA 8237 VIA 8237 with AD1888 at 0xa400, irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:0c.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:11.5 0401: 1106:3059 (rev 60) Subsystem: 1043:810d !!Loaded sound module options !!-------------------------- !!Module: snd_via82xx ac97_clock : 48000 ac97_quirk : dxs_support : 4 enable : N id : index : -1 joystick : N mpu_port : 0 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Analog Devices AD1888 PCI Subsys Vendor: 0x1043 PCI Subsys Device: 0x810d Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Double rate slots: 10/11 Extended ID : codec=0 rev=0 AMAP LDAC SDAC CDAC DSA=0 SPDIF DRA VRA Extended status : SPCV LDAC SDAC CDAC SPDIF=10/11 VRA PCM front DAC : 48000Hz PCM Surr DAC : 48000Hz PCM LFE DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 0:00 = 0090 0:02 = 1f1f 0:04 = 0404 0:06 = 0004 0:08 = 0000 0:0a = 0000 0:0c = 001f 0:0e = 001f 0:10 = 0808 0:12 = 0909 0:14 = 0000 0:16 = 1f1f 0:18 = 0505 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 03c7 0:2a = 05f1 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 1f00 0:38 = 1f1f 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 8080 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0004 0:74 = 1001 0:76 = 6420 0:78 = 0000 0:7a = 0000 0:7c = 4144 0:7e = 5368 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 7 Jun 9 2009 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 6 Jun 9 2009 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 5 Jun 9 2009 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 4 Jun 9 2009 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 3 Jun 9 2009 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 8 Jun 9 13:05 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Jun 9 2009 /dev/snd/timer !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse } ctl.!default { type pulse } !!System wide config file (/etc/asound.conf) # ~/.asoundrc or /etc/asound.conf # ALSA configuration file ##### USAGE ##### # Save this file as "~/.asoundrc" (for user-specific sound configuration) or # "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA # device names ad described in the next section. ##### DEVICE NAMES ##### # This configuration file defines four devices for use by the user. Those # devices are "analog", "mixed-analog", "digital", and "mixed-digital". The # user may also re-define "default" to be identical to one of the above-named # devices (i.e. to send all sound output to the digital output unless otherwise # specified). Use the device names as described below: # - "analog" outputs to the analog output directly and (at least on software # sound cards) blocks other audio output. After playback completes, "queued" # sounds are output in sequence. # - "mixed-analog" mixes audio output from multiple programs into the analog # output (so you can hear beeps, alerts, and other noises while playing back # an audio stream). # - "digital" outputs to the digital output directly. Since most (all?) # digital outputs expect 48kHz PCM audio, this may not work for some playback # (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV # recordings, etc.). # - "mixed-digital" # All other devices created within this file are used only by the configuration # file itself and should /not/ be used directly. In other words, do not use # the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital". ##### IMPORTANT ##### # To make this ALSA configuration file work with your sound card, you will need # to define the appropriate card and device information for the "analog-hw" and # "digital-hw" devices below. You can find the card and device information # using "aplay -l". ##### Configuration File ##### # Override the default output used by ALSA. If you do not override the # default, your default device is identical to the (unmixed) "analog" device # shown below. If you prefer mixed and/or digital output, uncomment the # appropriate four lines below (only one slave.pcm line). # # Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified # such that their default "default" device is identical to the "mixed-analog" # device. Whether using an ALSA version before or after 1.0.9, it does no harm # and has no affect on performance to redefine the device (even if the # redefinition does not change anything). Also, by using this ALSA # configuration file, you once again have access to unmixed analog output using # the "analog" device. pcm.!default { type plug ## Uncomment the following to use (unmixed) "analog" by default # slave.pcm "analog-hw" ## Uncomment the following to use "mixed-analog" by default slave.pcm "dmix-analog" ## Uncomment the following to use (unmixed) "digital" by default # slave.pcm "digital-hw" ## Uncomment the following to use "mixed-digital" by default # slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.!default { type hw card 0 } # Alias for (converted) analog output on the card # - This is identical to the device named "default"--which always exists and # refers to hw:0,0 (unless overridden) # - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog # output on the card # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is different from "default" and # allows playback while blocking other sound sources (until playback # completes). pcm.analog { type plug slave.pcm "analog-hw" } # Control device (mixer, etc.) for the card ctl.analog { type hw card 0 } # Alias for (converted) mixed analog output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the dmix plugin (in this case 48000Hz) # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is identical to "default" for # "software" sound cards. pcm.mixed-analog { type plug slave.pcm "dmix-analog" } # Control device (mixer, etc.) for the card ctl.mixed-analog { type hw card 0 } # Alias for (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.digital { type plug slave.pcm "digital-hw" } # Control device (mixer, etc.) for the card ctl.digital { type hw card 0 } # Alias for mixed (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.mixed-digital { type plug slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.mixed-digital { type hw card 0 } # The following devices are not useful by themselves. They require specific # rates, channels, and formats. Therefore, you probably do not want to use # them directly. Instead use of of the devices defined above. # Alias for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.analog-hw { type hw card 0 # The default value for device is 0, so no need to specify # - Uncomment one of the below or create a new "device N" line as appropriate # for your sound card or # device 1 # device 4 } # Control device (mixer, etc.) for the card ctl.analog-hw { type hw card 0 } # Alias for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.digital-hw { type hw card 0 device 1 # - Comment out "device 1" above and uncomment one of the below or create a # new "device N" line as appropriate for your sound card or # device 2 # device 4 } # Control device (mixer, etc.) for the card ctl.digital-hw { type hw card 0 } # Direct software mixing plugin for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-analog { type dmix ipc_key 1234 slave { pcm "analog-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-analog { type hw card 0 } # Direct software mixing plugin for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-digital { type dmix ipc_key 1235 slave { pcm "digital-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-digital { type hw card 0 } !!Aplay/Arecord output !!------------ APLAY ALSA lib conf.c:3009:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0 aplay: device_list:226: control open (0): No such file or directory **** List of PLAYBACK Hardware Devices **** ARECORD ALSA lib conf.c:3009:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0 arecord: device_list:226: control open (0): No such file or directory **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [V8237] ALSA lib conf.c:3009:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0 amixer: Control device hw:0 open error: No such file or directory ALSA lib conf.c:3009:(snd_config_update_r) Cannot access file /etc/alsa-pulse.conf ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL hw:0 amixer: Mixer attach hw:0 error: No such file or directory !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module vboxnetflt vboxdrv af_packet binfmt_misc snd_pcm_oss snd_mixer_oss snd_seq radeon drm ipv6 fuse ext2 loop dm_mod arc4 ecb crypto_blkcipher snd_via82xx gameport snd_via82xx_modem snd_ac97_codec snd_mpu401_uart ac97_bus rtl8187 rtc_cmos snd_rawmidi snd_pcm rtc_core ppdev snd_seq_device rtc_lib mac80211 pcspkr snd_timer via_rhine eeprom_93cx6 serio_raw snd k8temp soundcore mii snd_page_alloc cfg80211 i2c_viapro usblp parport_pc floppy parport tuner_simple tuner_types wm8775 cx25840 tuner ivtv compat_ioctl32 videodev v4l1_compat i2c_algo_bit cx2341x v4l2_common button shpchp tveeprom sr_mod pci_hotplug i2c_core joydev cdrom sg usbhid hid ff_memless ehci_hcd uhci_hcd usbcore sd_mod crc_t10dif edd ext3 mbcache jbd fan ide_pci_generic via82cxxx ide_core ata_generic sata_via pata_via libata scsi_mod dock thermal processor thermal_sys hwmon