!!################################ !!ALSA Information Script v 0.4.61 !!################################ !!Script ran on: Tue Nov 27 14:27:12 UTC 2012 !!Linux Distribution !!------------------ Gentoo Base System release 2.1 !!DMI Information !!--------------- Manufacturer: System manufacturer Product Name: System Product Name Product Version: System Version Firmware Version: 0401 !!Kernel Information !!------------------ Kernel release: 2.6.29-gentoo-r4 Operating System: GNU/Linux Architecture: x86_64 Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18a Library version: 1.0.25 Utilities version: 1.0.25 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Live ]: EMU10K1 - SB Live! Value [CT4832] SB Live! Value [CT4832] (rev.6, serial:0x80271102) at 0xe880, irq 16 1 [U0x46d0x9a6 ]: USB-Audio - USB Device 0x46d:0x9a6 USB Device 0x46d:0x9a6 at usb-0000:00:1d.7-5, high speed !!PCI Soundcards installed in the system !!-------------------------------------- 05:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 05:00.0 0401: 1102:0002 (rev 06) Subsystem: 1102:8027 !!Loaded sound module options !!--------------------------- !!AC97 Codec information !!---------------------- --startcollapse-- 0-0/0: SigmaTel STAC9721,23 PCI Subsys Vendor: 0x0000 PCI Subsys Device: 0x0000 Capabilities : DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : SigmaTel 3D Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 AMAP DSA=0 Extended status : PRJ 0:00 = 6940 0:02 = 9f1f 0:04 = 8000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0200 0:2a = 1000 0:2c = 0000 0:2e = 0000 0:30 = 0000 0:32 = 0000 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0082 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0380 0:76 = 0000 0:78 = 8380 0:7a = 0000 0:7c = 8384 0:7e = 7609 --endcollapse-- !!ALSA Device nodes !!----------------- /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Nov 27 10:55 . drwxr-xr-x 4 root root 80 Nov 27 10:55 .. lrwxrwxrwx 1 root root 15 Nov 27 10:55 usb-046d_09a6_65A2A220-02 -> ../../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 27 10:55 . drwxr-xr-x 4 root root 80 Nov 27 10:55 .. lrwxrwxrwx 1 root root 15 Nov 27 10:55 pci-0000:00:1d.7-usb-0:5:1.2 -> ../../controlC1 lrwxrwxrwx 1 root root 15 Nov 27 10:55 pci-0000:05:00.0 -> ../../controlC0 !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:252: no soundcards found... ARECORD arecord: device_list:252: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Live] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [U0x46d0x9a6] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module 8250_pnp nvidia 8250 serial_core !!ALSA/HDA dmesg !!-------------- usbcore: registered new interface driver snd-usb-audio ALSA device list: #0: SB Live! Value [CT4832] (rev.6, serial:0x80271102) at 0xe880, irq 16