!!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Thu Jun 30 11:39:12 UTC 2016 !!Linux Distribution !!------------------ Gentoo Base System release 2.2 NAME=Gentoo ID=gentoo PRETTY_NAME="Gentoo/Linux" HOME_URL="http://www.gentoo.org/" SUPPORT_URL="http://www.gentoo.org/main/en/support.xml" BUG_REPORT_URL="https://bugs.gentoo.org/" !!DMI Information !!--------------- Manufacturer: LENOVO Product Name: 23444WG Product Version: ThinkPad T430 Firmware Version: G1ETA5WW (2.65 ) !!Kernel Information !!------------------ Kernel release: 4.4.6-gentoo Operating System: GNU/Linux Architecture: x86_64 Processor: Intel(R) Core(TM) i3-2370M CPU @ 2.40GHz SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.4.6-gentoo Library version: 1.0.29 Utilities version: 1.0.29 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes !!Soundcards recognised by ALSA !!----------------------------- 0 [Loopback ]: Loopback - Loopback Loopback 1 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf2520000 irq 25 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:1b.0 0403: 8086:1e20 (rev 04) Subsystem: 17aa:21f3 !!Modprobe options (Sound related) !!-------------------------------- snd_intel8x0: index=0 model=pch position_fix=1 snd_hda_intel: index=0 model=pch position_fix=1 !!Loaded sound module options !!--------------------------- !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ID 269 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0269 Subsystem Id: 0x17aa21f3 Revision Id: 0x100203 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x57 0x57] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x57 0x57] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x90 0x90] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x80] Connection: 2 0x02 0x0b Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x90a60140: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x4, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00010014: OUT EAPD Detect EAPD 0x0: Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x0: Pin Default 0x03211020: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x00000010: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x0f Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x03a11830: [Jack] Mic at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x1a [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0000373c: IN OUT HP Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40138205: [N/A] Speaker at Ext N/A Conn = ATAPI, Color = Purple DefAssociation = 0x0, Sequence = 0x5 Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=37 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 7 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 6 0x18 0x19 0x1a 0x1b 0x1d 0x0b Codec: Intel ID 2806 Address: 3 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862806 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80] Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x02 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80] Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560020: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x03 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x80] Pincap 0x09000094: OUT Detect HBR HDMI DP Pin Default 0x18560030: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Jun 30 14:35 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 Jun 30 14:35 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 36 Jun 30 14:35 /dev/snd/hwC1D0 crw-rw---- 1 root audio 116, 39 Jun 30 14:35 /dev/snd/hwC1D3 crw-rw---- 1 root audio 116, 24 Jun 30 14:35 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 16 Jun 30 14:38 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 25 Jun 30 14:35 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 17 Jun 30 14:35 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 1 Jun 30 14:35 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Jun 30 14:35 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Jun 30 14:35 . drwxr-xr-x 3 root root 260 Jun 30 14:35 .. lrwxrwxrwx 1 root root 12 Jun 30 14:35 pci-0000:00:1b.0 -> ../controlC1 lrwxrwxrwx 1 root root 12 Jun 30 14:35 platform-snd_aloop.0 -> ../controlC0 !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Loopback] Card hw:0 'Loopback'/'Loopback 1' Mixer name : 'Loopback Mixer' Components : '' Controls : 98 Simple ctrls : 2 Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'Digital',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 120 Front Left: Capture 0 [0%] [-30.00dB] Front Right: Capture 0 [0%] [-30.00dB] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf2520000 irq 25' Mixer name : '' Components : 'HDA:10ec0269,17aa21f3,00100203 HDA:80862806,80860101,00100000' Controls : 0 Simple ctrls : 0 !!Alsactl output !!-------------- --startcollapse-- state.Loopback { control.1 { iface PCM name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.2 { iface PCM name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface PCM name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.4 { iface PCM name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.5 { iface PCM name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.6 { iface PCM name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.7 { iface PCM subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.8 { iface PCM subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface PCM subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.10 { iface PCM subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.11 { iface PCM subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.12 { iface PCM subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.13 { iface PCM subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.14 { iface PCM subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface PCM subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.16 { iface PCM subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.17 { iface PCM subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.18 { iface PCM subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.19 { iface PCM subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.20 { iface PCM subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.21 { iface PCM subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.22 { iface PCM subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.23 { iface PCM subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.24 { iface PCM subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.25 { iface PCM subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.26 { iface PCM subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.27 { iface PCM subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.28 { iface PCM subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.29 { iface PCM subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.30 { iface PCM subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.31 { iface PCM subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.32 { iface PCM subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.33 { iface PCM subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.34 { iface PCM subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.35 { iface PCM subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.36 { iface PCM subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.37 { iface PCM subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.38 { iface PCM subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.39 { iface PCM subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.40 { iface PCM subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.41 { iface PCM subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.42 { iface PCM subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.43 { iface PCM subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.44 { iface PCM subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.45 { iface PCM subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.46 { iface PCM subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.47 { iface PCM subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.48 { iface PCM subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.49 { iface PCM device 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.50 { iface PCM device 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.51 { iface PCM device 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.52 { iface PCM device 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.53 { iface PCM device 1 name 'PCM Slave Rate' value 44100 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.54 { iface PCM device 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.55 { iface PCM device 1 subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.56 { iface PCM device 1 subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.57 { iface PCM device 1 subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.58 { iface PCM device 1 subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.59 { iface PCM device 1 subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.60 { iface PCM device 1 subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.61 { iface PCM device 1 subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.62 { iface PCM device 1 subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.63 { iface PCM device 1 subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.64 { iface PCM device 1 subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.65 { iface PCM device 1 subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.66 { iface PCM device 1 subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.67 { iface PCM device 1 subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.68 { iface PCM device 1 subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.69 { iface PCM device 1 subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.70 { iface PCM device 1 subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.71 { iface PCM device 1 subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.72 { iface PCM device 1 subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.73 { iface PCM device 1 subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.74 { iface PCM device 1 subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.75 { iface PCM device 1 subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.76 { iface PCM device 1 subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.77 { iface PCM device 1 subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.78 { iface PCM device 1 subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.79 { iface PCM device 1 subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.80 { iface PCM device 1 subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.81 { iface PCM device 1 subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.82 { iface PCM device 1 subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.83 { iface PCM device 1 subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.84 { iface PCM device 1 subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.85 { iface PCM device 1 subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.86 { iface PCM device 1 subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.87 { iface PCM device 1 subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.88 { iface PCM device 1 subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.89 { iface PCM device 1 subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.90 { iface PCM device 1 subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.91 { iface PCM device 1 subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.92 { iface PCM device 1 subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.93 { iface PCM device 1 subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.94 { iface PCM device 1 subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.95 { iface PCM device 1 subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.96 { iface PCM device 1 subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.97 { iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 comment { access 'read write user' type INTEGER count 2 range '0 - 255' tlv '0000000100000008ffffec1400000014' dbmin -5100 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.98 { iface MIXER name 'Digital Capture Volume' value.0 0 value.1 0 comment { access 'read write user' type INTEGER count 2 range '0 - 120' tlv '0000000100000008fffff44800000032' dbmin -3000 dbmax 3000 dbvalue.0 -3000 dbvalue.1 -3000 } } } state.PCH { control { } } --endcollapse-- !!All Loaded Modules !!------------------ Module iwldvm mac80211 iwlwifi cfg80211 ata_generic pata_acpi mei_me iTCO_wdt x86_pkg_temp_thermal crc32c_intel vboxnetadp vboxnetflt vboxdrv snd_intel8x0 aes_x86_64 sha512_generic libiscsi scsi_transport_iscsi reiserfs gdth pdc_adma ahci libahci sata_qstor sata_promise pata_platform pata_oldpiix sr_mod cdrom sd_mod !!Sysfs Files !!----------- /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60140 0x14 0x90170110 0x15 0x03211020 0x17 0x411111f0 0x18 0x03a11830 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x40138205 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: /sys/class/sound/hwC1D3/init_pin_configs: 0x05 0x18560010 0x06 0x18560020 0x07 0x18560030 /sys/class/sound/hwC1D3/driver_pin_configs: /sys/class/sound/hwC1D3/user_pin_configs: /sys/class/sound/hwC1D3/init_verbs: /sys/class/sound/hwC1D3/hints: !!ALSA/HDA dmesg !!-------------- [ 0.147765] bus: 'intel_th': registered [ 0.147770] device class 'sound': registering [ 0.147791] Advanced Linux Sound Architecture Driver Initialized. [ 0.147805] bus: 'snd_seq': registered [ 0.147816] bus: 'hdaudio': registered -- [ 1.195457] PM: Removing info for i2c:i2c-6 [ 1.195476] device: 'card0-HDMI-A-1': device_add [ 1.195491] PM: Adding info for No Bus:card0-HDMI-A-1 [ 1.195516] device: 'card0-DP-1': device_add -- [ 1.195557] PM: Adding info for i2c:i2c-6 [ 1.195656] device: 'card0-HDMI-A-2': device_add [ 1.195672] PM: Adding info for No Bus:card0-HDMI-A-2 [ 1.195689] device: 'card0-HDMI-A-3': device_add [ 1.195703] PM: Adding info for No Bus:card0-HDMI-A-3 [ 1.195723] device: 'card0-DP-2': device_add -- [ 1.559094] PM: Adding info for No Bus:sequencer2 [ 1.559129] bus: 'snd_seq': add driver snd_seq_oss [ 1.559160] bus: 'snd_seq': add driver snd_seq_midi [ 1.559179] bus: 'platform': add driver snd_aloop [ 1.559198] Registering platform device 'snd_aloop.0'. Parent at platform [ 1.559203] device: 'snd_aloop.0': device_add [ 1.559209] bus: 'platform': add device snd_aloop.0 [ 1.559229] PM: Adding info for platform:snd_aloop.0 [ 1.559236] bus: 'platform': driver_probe_device: matched device snd_aloop.0 with driver snd_aloop [ 1.559238] bus: 'platform': really_probe: probing driver snd_aloop with device snd_aloop.0 [ 1.559240] snd_aloop snd_aloop.0: no default pinctrl state [ 1.559245] devices_kset: Moving snd_aloop.0 to end of list [ 1.559539] device: 'card0': device_add -- [ 1.559960] PM: Adding info for No Bus:mixer [ 1.560196] driver: 'snd_aloop': driver_bound: bound to device 'snd_aloop.0' [ 1.560198] bus: 'platform': really_probe: bound device snd_aloop.0 to driver snd_aloop [ 1.560205] bus: 'platform': add driver snd_mpu401 [ 1.560218] bus: 'pnp': add driver mpu401 -- [ 1.560234] driver: 'mpu401': driver_release [ 1.560237] bus: 'platform': remove driver snd_mpu401 [ 1.560239] driver: 'snd_mpu401': driver_release [ 1.560244] bus: 'pci': add driver snd_intel8x0m [ 1.560268] bus: 'pci': add driver snd_hda_intel [ 1.560273] bus: 'pci': driver_probe_device: matched device 0000:00:1b.0 with driver snd_hda_intel [ 1.560274] bus: 'pci': really_probe: probing driver snd_hda_intel with device 0000:00:1b.0 [ 1.560278] snd_hda_intel 0000:00:1b.0: no default pinctrl state [ 1.560282] devices_kset: Moving 0000:00:1b.0 to end of list [ 1.560394] driver: 'snd_hda_intel': driver_bound: bound to device '0000:00:1b.0' [ 1.560405] bus: 'pci': really_probe: bound device 0000:00:1b.0 to driver snd_hda_intel [ 1.560422] modprobe (110) used greatest stack depth: 14296 bytes left [ 1.560642] Registering platform device 'snd-soc-dummy'. Parent at platform [ 1.560643] device: 'snd-soc-dummy': device_add [ 1.560647] bus: 'platform': add device snd-soc-dummy [ 1.560657] PM: Adding info for platform:snd-soc-dummy [ 1.560666] bus: 'platform': add driver snd-soc-dummy [ 1.560672] bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummy [ 1.560673] bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy [ 1.560676] snd-soc-dummy snd-soc-dummy: no default pinctrl state [ 1.560679] devices_kset: Moving snd-soc-dummy to end of list [ 1.560685] driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy' [ 1.560686] bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy [ 1.560692] bus: 'platform': add driver soc-audio -- [ 6.591316] bus: 'serio': really_probe: bound device serio2 to driver psmouse [ 6.591376] ALSA device list: [ 6.592596] #0: Loopback 1 [ 6.593766] #1: HDA Intel PCH at 0xf2520000 irq 25 [ 6.596851] Freeing unused kernel memory: 1852K (ffffffff830b0000 - ffffffff8327f000) -- [ 10.813456] systemd-cgroups (1578) used greatest stack depth: 12792 bytes left [ 10.910945] snd_intel8x0: unknown parameter 'model' ignored [ 10.912061] snd_intel8x0: unknown parameter 'position_fix' ignored [ 10.913626] bus: 'pci': add driver snd_intel8x0 [ 11.130573] Adding 5999612k swap on /dev/sda3. Priority:-1 extents:1 across:5999612k