!!################################ !!ALSA Information Script v 0.4.52 !!################################ !!Script ran on: Wed Dec 17 14:59:52 EET 2008 !!Linux Distribution !!------------------ Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) !!Kernel Information !!------------------ Kernel release: 2.6.27.7-134.fc10.x86_64 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd0200000 irq 16 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:284b (rev 02) Subsystem: 17aa:100c !!Modprobe options (Sound related) !!-------------------------------- snd-usb-audio: index=7 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Analog Devices AD1983 Address: 2 Vendor Id: 0x11d41983 Subsystem Id: 0x17aa100c Revision Id: 0x100400 No Modem Function Group found Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=1 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=1 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 2 0x01* 0x04 Node 0x03 [Audio Output] wcaps 0x441: Stereo Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Processing caps: benign=1, ncoeff=70 Node 0x04 [Audio Input] wcaps 0x100501: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Connection: 1 0x14 Node 0x05 [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x24 0x24] Pincap 0x0817: OUT Detect Trigger ImpSense Pin Default 0x01014010: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 2 0x03 0x0e* Node 0x06 [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x34 0x34] Pincap 0x081f: OUT HP Detect Trigger ImpSense Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 2 0x03 0x0e* Node 0x07 [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x3d, nsteps=0x3f, stepsize=0x05, mute=1 Amp-Out vals: [0x24] Pincap 0x0810: OUT Pin Default 0x991301f0: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x0f Node 0x08 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02a19020: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x09 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x0181302e: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0xe Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x0a [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x414511f0: [N/A] SPDIF Out at Ext Rear Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 4 0x03 0x0c 0x0d 0x0e* Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x08* 0x09 Node 0x0d [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x09* 0x08 Node 0x0e [Audio Mixer] wcaps 0x200101: Stereo Connection: 3 0x11 0x12 0x13 Node 0x0f [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0b Node 0x10 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x80] Node 0x11 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x10 0x10] Connection: 1 0x03 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x0c Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x0d Node 0x14 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Connection: 4 0x0c 0x0d* 0x0e 0x0f Node 0x15 [Power Widget] wcaps 0x500500: Mono Power: setting=D0, actual=D0 Connection: 15 0x05 0x06* 0x07 0x08 0x09 0x0b 0x0c 0x0d 0x0e 0x0f 0x10 0x11 0x12 0x13 0x14 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 8 2008-12-17 10:30 /dev/snd/controlC0 crw-rw---- 1 root root 116, 7 2008-12-17 10:30 /dev/snd/hwC0D2 crw-rw---- 1 root root 116, 6 2008-12-17 10:30 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 5 2008-12-17 10:30 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 4 2008-12-17 10:30 /dev/snd/pcmC0D1p crw-rw---- 1 root root 116, 3 2008-12-17 10:30 /dev/snd/seq crw-rw---- 1 root root 116, 2 2008-12-17 10:30 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module i915 drm bridge stp bnep sco l2cap bluetooth autofs4 nls_utf8 cifs nfs lockd nfs_acl fuse sunrpc acpi_cpufreq freq_table dm_multipath uinput ppdev floppy pcspkr serio_raw i2c_i801 i2c_core snd_hda_intel iTCO_wdt iTCO_vendor_support snd_usb_audio snd_usb_lib snd_rawmidi snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm tg3 snd_timer snd_page_alloc libphy snd_hwdep snd soundcore parport_pc parport usb_storage ata_generic pata_acpi