!!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Fri Mar 25 16:12:41 UTC 2011 !!Linux Distribution !!------------------ Welcome to openSUSE 11.1 - Kernel \r (\l). openSUSE 11.1 (i586) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-2.0-ia32:core-3.2-ia32" !!DMI Information !!--------------- Manufacturer: Hewlett-Packard Product Name: Presario V6000 (GS630EA#ABV) Product Version: Rev 1 !!Kernel Information !!------------------ Kernel release: 2.6.27.7-9-pae Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:1b.0 0403: 8086:27d8 (rev 02) Subsystem: 103c:30bb !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Conexant CX20549 (Venice) Address: 0 Vendor Id: 0x14f15045 Subsystem Id: 0x103c30bb Revision Id: 0x100100 Modem Function Group: 0x2 Default PCM: rates [0x140]: 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x10 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0xab 0xab] Pincap 0x00010014: OUT EAPD Detect EAPD 0x2: EAPD Pin Default 0x95170110: [Fixed] Speaker at Int Top Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 2 0x19 0x17* Node 0x11 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0x2b 0x2b] Pincap 0x0000113c: IN OUT HP Detect Vref caps: HIZ 80 Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=37, enabled=1 Power: setting=D0, actual=D0 Connection: 2 0x19 0x17* Node 0x12 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x2b, nsteps=0x2b, stepsize=0x05, mute=1 Amp-Out vals: [0xab 0xab] Pincap 0x0000113c: IN OUT HP Detect Vref caps: HIZ 80 Pin Default 0x40a190f0: [N/A] Mic at Ext N/A Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Connection: 2 0x19* 0x17 Node 0x13 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x22451130: [Jack] SPDIF Out at Sep Front Conn = Optical, Color = Black DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x18 Node 0x14 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00001124: IN Detect Vref caps: HIZ 80 Pin Default 0x02a79120: [Jack] Mic at Ext Front Conn = Analog, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x400001f0: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x16 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0b, mute=1 Amp-Out vals: [0x06] Node 0x17 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x14, nsteps=0x2b, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Power: setting=D0, actual=D0 Connection: 5 0x19 0x14 0x12 0x11 0x15 Node 0x18 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x40]: 48000 bits [0x6]: 16 20 formats [0x5]: PCM AC3 Node 0x19 [Audio Output] wcaps 0xc11: Stereo R/L Converter: stream=0, channel=0 PCM: rates [0x540]: 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Node 0x1a [Audio Input] wcaps 0x100d0b: Stereo Amp-In R/L Amp-In caps: ofs=0x00, nsteps=0x17, stepsize=0x05, mute=1 Amp-In vals: [0x17 0x17] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Connection: 5 0x17 0x14* 0x12 0x11 0x15 Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!ALSA Device nodes !!----------------- !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device snd_hda_intel snd_pcm snd_timer snd_page_alloc snd_hwdep snd soundcore st ide_disk ide_cd_mod ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit af_packet i915 drm rfkill_input binfmt_misc ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter cpufreq_conservative cpufreq_userspace cpufreq_powersave ip6table_mangle acpi_cpufreq nf_conntrack_netbios_ns nf_conntrack_ipv4 speedstep_lib nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod arc4 ecb crypto_blkcipher b43 rfkill mac80211 cfg80211 led_class input_polldev iTCO_wdt e100 iTCO_vendor_support i2c_i801 intel_agp ssb mii video output pcspkr i2c_core agpgart wmi battery button pcmcia sr_mod sg ac rtc_cmos rtc_core pcmcia_core cdrom rtc_lib joydev ehci_hcd sd_mod uhci_hcd crc_t10dif usbcore edd ext3 mbcache jbd fan thermal processor thermal_sys hwmon ide_pci_generic ide_core ata_generic ata_piix libata scsi_mod dock !!ALSA/HDA dmesg !!------------------ iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 b43-phy0: Broadcom 4311 WLAN found -- Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] ALSA sound/pci/hda/hda_intel.c:622: hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x010b8000 Adding 2104444k swap on /dev/sda6. Priority:-1 extents:1 across:2104444k -- SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.4 DST=195.135.221.134 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=9746 DF PROTO=TCP SPT=38264 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A00104EC9275E535C) HDA Intel 0000:00:1b.0: PCI INT A disabled SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.4 DST=195.135.221.134 LEN=52 TOS=0x00 PREC=0x00 TTL=64 ID=9747 DF PROTO=TCP SPT=38264 DPT=80 WINDOW=108 RES=0x00 ACK FIN URGP=0 OPT (0101080A001096A9275E535C) SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.1.4 DST=224.0.0.251 LEN=62 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=42 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 HDA Intel 0000:00:1b.0: PCI INT A disabled HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64