!!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Tue Mar 6 07:42:30 UTC 2012 !!Linux Distribution !!------------------ Ubuntu 10.04.4 LTS \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 10.04.4 LTS" !!DMI Information !!--------------- Manufacturer: Hewlett-Packard Product Name: HP dx5150 MT Product Version: !!Kernel Information !!------------------ Kernel release: 2.6.32-38-generic Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.21 Library version: 1.0.22 Utilities version: 1.0.22 !!Loaded ALSA modules !!------------------- snd_atiixp !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [IXP ]: ATIIXP - ATI IXP ATI IXP rev 2 with ALC655 at 0xfe02a000, irq 17 !!PCI Soundcards installed in the system !!-------------------------------------- 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:14.5 0401: 1002:4370 (rev 02) Subsystem: 103c:3009 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_atiixp ac97_clock : 48000 ac97_codec : -1 ac97_quirk : enable : N id : index : -1 spdif_aclink : Y !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Realtek ALC655 rev 0 PCI Subsys Vendor: 0x103c PCI Subsys Device: 0x3009 Flags: 0 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0xffff Subsys. ID : 0xffff Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=2 LDAC SDAC CDAC DSA=0 SPDIF Extended status : SPCV LDAC SDAC CDAC SPDIF=10/11 SPDIF SPDIF Control : Consumer PCM Copyright Category=0x2 Generation=1 Rate=48kHz 0:00 = 0000 0:02 = 0f0f 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 0606 0:14 = 0000 0:16 = 9f1f 0:18 = 0808 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0400 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 09c4 0:2a = 05f4 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 2820 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0aea 0:6a = 8000 0:6c = 0000 0:6e = 0025 0:70 = 81e0 0:72 = 22e8 0:74 = 8000 0:76 = 0000 0:78 = 0007 0:7a = a092 0:7c = 414c 0:7e = 4760 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 7 Mar 5 12:13 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 6 Mar 5 12:13 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 5 Mar 5 12:13 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 4 Mar 5 12:13 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 3 Mar 5 12:13 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Mar 5 12:13 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Mar 5 12:13 . drwxr-xr-x 3 root root 180 Mar 5 12:13 .. lrwxrwxrwx 1 root root 12 Mar 5 12:13 pci-0000:00:14.5 -> ../controlC0 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # Make it possible for ALSA forward to pulseaudio on thin clients. # Based on idea from # http://alsa.opensrc.org/index.php/Default_device_from_environment_variable pcm.!default { @func refer name { @func concat strings [ "pcm." { @func getenv vars [ LTSP_ALSA_DEFAULT ] default "hw:0" } ] } } ctl.!default { @func refer name { @func concat strings [ "ctl." { @func getenv vars [ LTSP_ALSA_DEFAULT ] default "hw:0" } ] } } pcm.pulse { type pulse } ctl.pulse { type pulse } !!Aplay/Arecord output !!------------ APLAY aplay: device_list:223: no soundcards found... ARECORD arecord: device_list:223: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [IXP] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module binfmt_misc fbcon tileblit font bitblit softcursor vga16fb vgastate snd_atiixp snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq radeon snd_timer snd_seq_device ttm drm_kms_helper ppdev snd drm i2c_algo_bit lp psmouse serio_raw k8temp parport_pc i2c_piix4 soundcore snd_page_alloc edac_core edac_mce_amd parport shpchp raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 usbhid hid pata_atiixp multipath e1000 floppy sata_sil tg3 linear !!ALSA/HDA dmesg !!------------------