!!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Mon Aug 2 19:45:28 UTC 2010 !!Linux Distribution !!------------------ Fedora release 13 (Goddard) Fedora release 13 (Goddard) Fedora release 13 (Goddard) Fedora release 13 (Goddard) !!DMI Information !!--------------- Manufacturer: System manufacturer Product Name: System name !!Kernel Information !!------------------ Kernel release: 2.6.33.6-147.fc13.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.21 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- snd_usb_audio snd_intel8x0 snd_mpu401 !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes aRts: Installed - Yes (/usr/bin/artsd) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [default ]: USB-Audio - USB Sound Device USB Sound Device at usb-0000:00:02.0-1, full speed 1 [CK804 ]: NFORCE - NVidia CK804 NVidia CK804 with ALC850 at irq 23 2 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 05:07.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 05:07.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:04.0 0401: 10de:0059 (rev a2) Subsystem: 1043:812a !!Modprobe options (Sound related) !!-------------------------------- snd-intel8x0: index=0 snd_intel8x0: index=1 snd-mpu401: index=2 snd-usb-audio: index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_usb_audio async_unlink : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 nrpacks : 8 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!Module: snd_intel8x0 ac97_clock : 0 ac97_quirk : (null) buggy_irq : Y buggy_semaphore : N enable : N id : (null) index : 1 joystick : 0 spdif_aclink : 0 xbox : N !!Module: snd_mpu401 enable : Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : 2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2 irq : 10,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535 pnp : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y port : 816,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 uart_enter : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Realtek ALC850 rev 0 PCI Subsys Vendor: 0x1043 PCI Subsys Device: 0x812a Flags: 80020 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0xffff Subsys. ID : 0xffff Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Double rate slots: 7/8 Extended ID : codec=0 rev=2 LDAC SDAC CDAC DSA=0 SPDIF DRA Extended status : SPCV LDAC SDAC CDAC SPDIF=10/11 SPDIF SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz 0:00 = 0000 0:02 = 0000 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 0808 0:14 = 0000 0:16 = 9f1f 0:18 = 0808 0:1a = 0000 0:1c = 8606 0:1e = 0000 0:20 = 0400 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 09c6 0:2a = 05f4 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 8080 0:38 = 8080 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0a0a 0:6a = 8000 0:6c = 0000 0:6e = 0017 0:70 = c5a0 0:72 = 00c0 0:74 = 8388 0:76 = 8a90 0:78 = 108e 0:7a = 20d2 0:7c = 414c 0:7e = 4790 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 8 Aug 2 23:21 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 13 Aug 2 19:38 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 3 Aug 2 19:38 /dev/snd/controlC2 crw-rw---- 1 root audio 116, 2 Aug 2 19:38 /dev/snd/midiC2D0 crw-rw---- 1 root audio 116, 7 Aug 2 23:21 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 6 Aug 2 23:21 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 12 Aug 2 19:42 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 11 Aug 2 19:42 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 10 Aug 2 19:38 /dev/snd/pcmC1D1c crw-rw---- 1 root audio 116, 9 Aug 2 19:42 /dev/snd/pcmC1D2p crw-rw---- 1 root audio 116, 5 Aug 2 19:38 /dev/snd/seq crw-rw---- 1 root audio 116, 4 Aug 2 19:38 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Aug 2 23:21 . drwxr-xr-x 4 root root 320 Aug 2 23:21 .. lrwxrwxrwx 1 root root 12 Aug 2 23:21 usb-0d8c_USB_Sound_Device-00 -> ../controlC0 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Aug 2 23:21 . drwxr-xr-x 4 root root 320 Aug 2 23:21 .. lrwxrwxrwx 1 root root 12 Aug 2 23:21 pci-0000:00:02.0-usb-0:1:1.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Aug 2 19:38 pci-0000:00:04.0 -> ../controlC1 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: default [USB Sound Device ], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CK804 [NVidia CK804], device 2: Intel ICH - IEC958 [NVidia CK804 - IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: default [USB Sound Device ], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: CK804 [NVidia CK804], device 1: Intel ICH - MIC ADC [NVidia CK804 - MIC ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [default] Card hw:0 'default'/'USB Sound Device at usb-0000:00:02.0-1, full speed' Mixer name : 'USB Mixer' Components : 'USB0d8c:0102' Controls : 14 Simple ctrls : 6 Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right - Rear Left - Rear Right - Front Center - Woofer - Side Left - Side Right Limits: Playback 0 - 197 Mono: Front Left: Playback 196 [99%] [0.19dB] [on] Front Right: Playback 196 [99%] [0.19dB] [on] Rear Left: Playback 196 [99%] [0.19dB] [on] Rear Right: Playback 196 [99%] [0.19dB] [on] Front Center: Playback 196 [99%] [0.19dB] [on] Woofer: Playback 196 [99%] [0.19dB] [on] Side Left: Playback 196 [99%] [0.19dB] [on] Side Right: Playback 196 [99%] [0.19dB] [on] Simple mixer control 'PCM',0 Capabilities: cvolume cswitch cswitch-joined penum Capture channels: Front Left - Front Right Limits: Capture 0 - 6928 Front Left: Capture 4096 [59%] [0.01dB] [on] Front Right: Capture 4096 [59%] [0.01dB] [on] Simple mixer control 'PCM Capture Source',0 Capabilities: enum Items: 'Mic' 'Line' 'IEC958 In' 'Mixer' Item0: 'Mic' Simple mixer control 'Line',0 Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined penum Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 8065 Capture 0 - 6928 Front Left: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on] Front Right: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on] Simple mixer control 'Mic',0 Capabilities: pvolume cvolume pswitch pswitch-joined cswitch cswitch-joined penum Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 8065 Capture 0 - 6928 Front Left: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on] Front Right: Playback 6144 [76%] [0.01dB] [off] Capture 4096 [59%] [0.01dB] [on] Simple mixer control 'IEC958 In',0 Capabilities: cswitch cswitch-joined penum Capture channels: Mono Mono: Capture [on] !!-------Mixer controls for card 1 [CK804] Card hw:1 'CK804'/'NVidia CK804 with ALC850 at irq 23' Mixer name : 'Realtek ALC850 rev 0' Components : 'AC97a:414c4790' Controls : 42 Simple ctrls : 27 Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [on] Front Right: Playback 31 [100%] [0.00dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 23 [74%] [0.00dB] [on] Front Right: Playback 23 [74%] [0.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch penum Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [off] Front Right: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'Surround Jack Mode',0 Capabilities: enum Items: 'Shared' 'Independent' Item0: 'Shared' Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 23 [74%] [0.00dB] [on] Capture [off] Front Right: Playback 23 [74%] [0.00dB] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost ( 20dB)',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Front Input',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive penum Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined cswitch cswitch-joined penum Playback channels: Mono Capture channels: Mono Mono: Playback [on] Capture [off] Simple mixer control 'IEC958 Playback AC97-SPSA',0 Capabilities: volume volume-joined penum Playback channels: Mono Capture channels: Mono Limits: 0 - 3 Mono: 3 [100%] Simple mixer control 'IEC958 Playback Source',0 Capabilities: enum Items: 'PCM' 'Analog In' 'IEC958 In' Item0: 'PCM' Simple mixer control 'Beep',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 0 [0%] [-45.00dB] [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive penum Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mono Output Select',0 Capabilities: enum Items: 'Mix' 'Mic' Item0: 'Mix' Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined penum Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 6 [40%] [9.00dB] [off] Front Right: Capture 6 [40%] [9.00dB] [off] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive penum Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive penum Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Channel Mode',0 Capabilities: enum Items: '2ch' '4ch' '6ch' '8ch' Item0: '2ch' Simple mixer control 'Duplicate Front',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 2 [UART] Card hw:2 'UART'/'MPU-401 UART at 0x330, irq 10' Mixer name : '' Components : '' Controls : 0 Simple ctrls : 0 !!Alsactl output !!------------- --startcollapse-- state.default { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Playback Switch' value false } control.2 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 8065' comment.dbmin -2400 comment.dbmax 750 iface MIXER name 'Mic Playback Volume' value.0 6144 value.1 6144 } control.3 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line Playback Switch' value false } control.4 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 8065' comment.dbmin -2400 comment.dbmax 750 iface MIXER name 'Line Playback Volume' value.0 6144 value.1 6144 } control.5 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Speaker Playback Switch' value true } control.6 { comment.access 'read write' comment.type INTEGER comment.count 8 comment.range '0 - 197' comment.dbmin -3693 comment.dbmax 0 iface MIXER name 'Speaker Playback Volume' value.0 196 value.1 196 value.2 196 value.3 196 value.4 196 value.5 196 value.6 196 value.7 196 } control.7 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Capture Switch' value true } control.8 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 6928' comment.dbmin -1600 comment.dbmax 1106 iface MIXER name 'Mic Capture Volume' value.0 4096 value.1 4096 } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line Capture Switch' value true } control.10 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 6928' comment.dbmin -1600 comment.dbmax 1106 iface MIXER name 'Line Capture Volume' value.0 4096 value.1 4096 } control.11 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 In Capture Switch' value true } control.12 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'PCM Capture Switch' value true } control.13 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 6928' comment.dbmin -1600 comment.dbmax 1106 iface MIXER name 'PCM Capture Volume' value.0 4096 value.1 4096 } control.14 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Mic comment.item.1 Line comment.item.2 'IEC958 In' comment.item.3 Mixer iface MIXER name 'PCM Capture Source' value Mic } } state.CK804 { control.1 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Playback Switch' value true } control.2 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Playback Volume' value.0 31 value.1 31 } control.3 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Center Playback Switch' value false } control.4 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Center Playback Volume' value 31 } control.5 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'LFE Playback Switch' value false } control.6 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'LFE Playback Volume' value 31 } control.7 { comment.access 'read write' comment.type BOOLEAN comment.count 2 iface MIXER name 'Surround Playback Switch' value.0 false value.1 false } control.8 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Surround Playback Volume' value.0 31 value.1 31 } control.9 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Master Mono Playback Switch' value false } control.10 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -4650 comment.dbmax 0 iface MIXER name 'Master Mono Playback Volume' value 0 } control.11 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Beep Playback Switch' value false } control.12 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 15' comment.dbmin -4500 comment.dbmax 0 iface MIXER name 'Beep Playback Volume' value 0 } control.13 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Phone Playback Switch' value false } control.14 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Phone Playback Volume' value 0 } control.15 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Playback Switch' value false } control.16 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Mic Playback Volume' value 0 } control.17 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Boost ( 20dB)' value false } control.18 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Line Playback Switch' value false } control.19 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Line Playback Volume' value.0 0 value.1 0 } control.20 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'CD Playback Switch' value true } control.21 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'CD Playback Volume' value.0 23 value.1 23 } control.22 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Aux Playback Switch' value false } control.23 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'Aux Playback Volume' value.0 0 value.1 0 } control.24 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'PCM Playback Switch' value true } control.25 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 31' comment.dbmin -3450 comment.dbmax 1200 iface MIXER name 'PCM Playback Volume' value.0 23 value.1 23 } control.26 { comment.access 'read write' comment.type ENUMERATED comment.count 2 comment.item.0 Mic comment.item.1 CD comment.item.2 Video comment.item.3 Aux comment.item.4 Line comment.item.5 Mix comment.item.6 'Mix Mono' comment.item.7 Phone iface MIXER name 'Capture Source' value.0 Mic value.1 Mic } control.27 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Capture Switch' value false } control.28 { comment.access 'read write' comment.type INTEGER comment.count 2 comment.range '0 - 15' comment.dbmin 0 comment.dbmax 2250 iface MIXER name 'Capture Volume' value.0 6 value.1 6 } control.29 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Mix comment.item.1 Mic iface MIXER name 'Mono Output Select' value Mix } control.30 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Mic1 comment.item.1 Mic2 iface MIXER name 'Mic Select' value Mic1 } control.31 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.32 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000 } control.33 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.34 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } control.35 { comment.access 'read write' comment.type INTEGER comment.count 1 comment.range '0 - 3' iface MIXER name 'IEC958 Playback AC97-SPSA' value 3 } control.36 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Duplicate Front' value false } control.37 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'Mic Front Input Switch' value false } control.38 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 Shared comment.item.1 Independent iface MIXER name 'Surround Jack Mode' value Shared } control.39 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 '2ch' comment.item.1 '4ch' comment.item.2 '6ch' comment.item.3 '8ch' iface MIXER name 'Channel Mode' value '2ch' } control.40 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Capture Switch' value false } control.41 { comment.access 'read write' comment.type ENUMERATED comment.count 1 comment.item.0 PCM comment.item.1 'Analog In' comment.item.2 'IEC958 In' iface MIXER name 'IEC958 Playback Source' value PCM } control.42 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'External Amplifier' value true } } state.UART { control { } } --endcollapse-- !!All Loaded Modules !!------------------ Module fuse ip6table_filter ip6_tables tun ebtable_nat ipt_MASQUERADE iptable_nat nf_nat bridge stp llc vboxnetadp vboxnetflt vboxdrv autofs4 hwmon_vid nls_utf8 cifs sunrpc ebt_ip ebtable_filter ebtables cpufreq_ondemand powernow_k8 ipv6 uinput dvb_pll cx22702 snd_intel8x0 snd_ac97_codec ac97_bus cx88_dvb cx88_vp3054_i2c snd_cs4236 videobuf_dvb snd_wss_lib snd_usb_audio dvb_core snd_opl3_lib snd_seq snd_pcm cx8800 cx8802 snd_timer cx88xx snd_mpu401 snd_hwdep snd_mpu401_uart snd_usb_lib v4l2_common snd_rawmidi videodev ppdev snd_seq_device snd ir_common v4l1_compat parport_pc parport k8temp tveeprom asus_atk0110 snd_page_alloc i2c_nforce2 soundcore skge serio_raw ns558 gameport microcode ir_core btcx_risc videobuf_dma_sg videobuf_core raid1 ata_generic sata_sil pata_acpi sata_sil24 sata_nv pata_amd radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core !!ALSA/HDA dmesg !!------------------ cx88[0]/0: registered device vbi0 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 cx88/2: cx2388x dvb driver version 0.0.7 loaded -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 EXT3-fs (sdg2): using internal journal -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 NET: Registered protocol family 10 -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 eth0: no IPv6 routers present -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 Bridge firewalling registered -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 lo: Disabled Privacy Extensions usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 tap0: no IPv6 routers present -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 br0: port 1(eth0) entering forwarding state -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen -- usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 usb 2-1: reset full speed USB device using ohci_hcd and address 2 ALSA sound/usb/usbaudio.c:1302: current rate 30464 is different from the runtime rate 96000 md: requested-resync of RAID array md2