!!################################
!!ALSA Information Script v 0.4.65
!!################################

!!Script ran on: Thu Oct  1 12:47:46 UTC 2020


!!Linux Distribution
!!------------------

ID_LIKE=debian


!!DMI Information
!!---------------

Manufacturer:      
Product Name:      
Product Version:   
Firmware Version:  
Board Vendor:      
Board Name:        


!!ACPI Device Status Information
!!---------------



!!Kernel Information
!!------------------

Kernel release:    5.4.51-v7 
Operating System:  GNU/Linux
Architecture:      armv7l
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     k5.4.51-v7 
Library version:    1.1.8
Utilities version:  1.1.8


!!Loaded ALSA modules
!!-------------------

snd_usb_audio


!!Sound Servers on this system
!!----------------------------

No sound servers found.


!!Soundcards recognised by ALSA
!!-----------------------------

 0 [A10            ]: USB-Audio - ARCAM USB Audio 1.0
                      ARCAM ARCAM USB Audio 1.0 at usb-3f980000.usb-1.4, full speed


!!PCI Soundcards installed in the system
!!--------------------------------------



!!Modprobe options (Sound related)
!!--------------------------------

snd_pcsp: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_bcm2835: enable_compat_alsa=0
snd_bcm2835: enable_hdmi=1
snd_bcm2835: enable_headphones=1


!!Loaded sound module options
!!---------------------------

!!Module: snd_usb_audio
	autoclock : Y
	device_setup : 0,0,0,0,0,0,0,0
	enable : Y,Y,Y,Y,Y,Y,Y,Y
	id : (null),(null),(null),(null),(null),(null),(null),(null)
	ignore_ctl_error : N
	index : -1,-1,-1,-1,-1,-1,-1,-1
	pid : -1,-1,-1,-1,-1,-1,-1,-1
	quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null)
	use_vmalloc : Y
	vid : -1,-1,-1,-1,-1,-1,-1,-1


!!USB Mixer information
!!---------------------
--startcollapse--

USB Mixer: usb_id=0x25c40003, ctrlif=0, ctlerr=0
Card: ARCAM ARCAM USB Audio 1.0 at usb-3f980000.usb-1.4, full speed
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116,  0 Oct  1 13:44 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 16 Oct  1 13:44 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116,  1 Oct  1 13:44 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Oct  1 13:44 /dev/snd/timer

/dev/snd/by-id:
total 0
drwxr-xr-x 2 root root  60 Oct  1 13:44 .
drwxr-xr-x 4 root root 160 Oct  1 13:44 ..
lrwxrwxrwx 1 root root  12 Oct  1 13:44 usb-ARCAM_ARCAM_USB_Audio_1.0_0000-00 -> ../controlC0

/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root  60 Oct  1 13:44 .
drwxr-xr-x 4 root root 160 Oct  1 13:44 ..
lrwxrwxrwx 1 root root  12 Oct  1 13:44 platform-3f980000.usb-usb-0:1.4:1.0 -> ../controlC0


!!Aplay/Arecord output
!!--------------------

APLAY

**** List of PLAYBACK Hardware Devices ****
card 0: A10 [ARCAM USB Audio 1.0], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

ARECORD

**** List of CAPTURE Hardware Devices ****

!!Amixer output
!!-------------

!!-------Mixer controls for card A10

Card hw:0 'A10'/'ARCAM ARCAM USB Audio 1.0 at usb-3f980000.usb-1.4, full speed'
  Mixer name	: 'USB Mixer'
  Components	: 'USB25c4:0003'
  Controls      : 2
  Simple ctrls  : 0


!!Alsactl output
!!--------------

--startcollapse--
state.A10 {
	control.1 {
		iface PCM
		name 'Playback Channel Map'
		value.0 0
		value.1 0
		comment {
			access read
			type INTEGER
			count 2
			range '0 - 36'
		}
	}
	control.2 {
		iface CARD
		name 'Keep Interface'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
}
--endcollapse--


!!All Loaded Modules
!!------------------

8021q
bcm2835_codec
bcm2835_isp
bcm2835_mmal_vchiq
bcm2835_v4l2
bluetooth
bnep
brcmfmac
brcmutil
btbcm
cfg80211
cmac
ecc
ecdh_generic
fixed
garp
hci_uart
ip_tables
ipv6
libsha256
llc
mc
nf_defrag_ipv6
raspberrypi_hwmon
rfkill
sha256_generic
snd
snd_hwdep
snd_pcm
snd_rawmidi
snd_seq_device
snd_timer
snd_usb_audio
snd_usbmidi_lib
stp
uio
uio_pdrv_genirq
v4l2_mem2mem
vc_sm_cma
videobuf2_common
videobuf2_dma_contig
videobuf2_memops
videobuf2_v4l2
videobuf2_vmalloc
videodev
x_tables


!!ALSA/HDA dmesg
!!--------------

[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240555
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=e958a70e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
--
[    7.381839] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 22 2019 01:59:28 version 7.45.98.94 (r723000 CY) FWID 01-3b33decd
[    8.048570] usbcore: registered new interface driver snd-usb-audio
[    9.184983] uart-pl011 3f201000.serial: no DMA platform data


!!Packages installed
!!--------------------

ii  alsa-utils                     1.1.8-2                                   armhf        Utilities for configuring and using ALSA