!!################################
!!ALSA Information Script v 0.4.61
!!################################

!!Script ran on: Thu Jul  5 17:04:11 UTC 2012


!!Linux Distribution
!!------------------

Welcome to openSUSE 12.1 "Asparagus" - Kernel \r (\l). openSUSE 12.1 (x86_64) LSB_VERSION="core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64" NAME=openSUSE PRETTY_NAME="openSUSE 12.1 (Asparagus) (x86_64)" ID=opensuse


!!DMI Information
!!---------------

Manufacturer:      System manufacturer
Product Name:      System Product Name
Product Version:   System Version
Firmware Version:  ASUS M2N-SLI DELUXE ACPI BIOS Revision 5001


!!Kernel Information
!!------------------

Kernel release:    3.1.10-1.16-desktop
Operating System:  GNU/Linux
Architecture:      x86_64
Processor:         x86_64
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     
Library version:    
Utilities version:  1.0.24.2


!!Loaded ALSA modules
!!-------------------



!!Sound Servers on this system
!!----------------------------

Pulseaudio:
      Installed - Yes (/usr/bin/pulseaudio)
      Running - No

ESound Daemon:
      Installed - Yes (/usr/bin/esd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------



!!PCI Soundcards installed in the system
!!--------------------------------------

00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
03:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------

00:06.1 0403: 10de:0371 (rev a2)
	Subsystem: 1043:81f6
--
03:00.1 0403: 1002:aa08
	Subsystem: 1043:aa08


!!Loaded sound module options
!!---------------------------


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116, 1 Jul  5 19:51 /dev/snd/seq


!!Aplay/Arecord output
!!--------------------

APLAY

aplay: device_list:244: no soundcards found...

ARECORD

arecord: device_list:244: no soundcards found...

!!Amixer output
!!-------------


!!Alsactl output
!!--------------

--startcollapse--
--endcollapse--


!!All Loaded Modules
!!------------------

Module
ip6t_LOG
xt_tcpudp
xt_pkttype
ipt_LOG
xt_limit
af_packet
ip6t_REJECT
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_raw
xt_NOTRACK
ipt_REJECT
iptable_raw
iptable_filter
ip6table_mangle
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_conntrack_ipv4
nf_defrag_ipv4
ip_tables
xt_conntrack
nf_conntrack
ip6table_filter
ip6_tables
x_tables
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
powernow_k8
microcode
mperf
fuse
usblp
edd
nv_tco
asus_atk0110
ppdev
parport_pc
sr_mod
edac_core
cdrom
edac_mce_amd
sg
forcedeth
parport
serio_raw
button
k10temp
i2c_nforce2
pcspkr
joydev
autofs4
dm_mod
linear
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
fan
processor
ata_generic
pata_jmicron
thermal
thermal_sys
sata_nv
pata_amd


!!ALSA/HDA dmesg
!!--------------

[   10.262160] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[   10.262166] snd_hda_intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[   10.262169] hda_intel: msi for device 1043:81f6 set to 0
[   10.262205] snd_hda_intel 0000:00:06.1: setting latency timer to 64
[   10.270058] ALSA hda_intel.c:1454 Enable delay in RIRB handling
[   10.369626] ifup[946]: Service network not started and mode 'auto' -> skipping
[   10.369633] ifup[947]: Service network not started and mode 'auto' -> skipping
[   10.965429] snd_hda_intel 0000:03:00.1: PCI INT B -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[   10.965434] ALSA hda_intel.c:2416 Using LPIB position fix
[   10.965499] snd_hda_intel 0000:03:00.1: irq 43 for MSI/MSI-X
[   10.965518] snd_hda_intel 0000:03:00.1: setting latency timer to 64
[   10.969059] ALSA hda_intel.c:1492 Enable sync_write for stable communication
[   10.981601] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[   10.982117] input: HDA ATI HDMI HDMI/DP as /devices/pci0000:00/0000:00:0f.0/0000:03:00.1/sound/card1/input7
[   11.161274] udev-configure-printer[870]: failed to connect to CUPS server; giving up
--
[   18.263246] boot.apparmor[1025]: Starting AppArmor ..done
[   18.341956] alsactl[1140]: Found hardware: "HDA-Intel" "Analog Devices AD1988B" "HDA:11d4198b,104381f6,00100400" "0x1043" "0x81f6"
[   18.341963] alsactl[1140]: Hardware is initialized using a generic method
--
[ 4119.391844] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:1d:60:a2:85:08:cc:5d:4e:2b:f3:8a:08:00 SRC=212.15.154.161 DST=192.168.1.3 LEN=48 TOS=0x10 PREC=0x20 TTL=114 ID=10256 DF PROTO=TCP SPT=2885 DPT=28992 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405AC01010402) 
[ 4119.475224] snd_hda_intel 0000:03:00.1: PCI INT B disabled
[ 4119.482169] snd_hda_intel 0000:00:06.1: PCI INT B disabled
[ 4125.328825] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=00:1d:60:a2:85:08:cc:5d:4e:2b:f3:8a:08:00 SRC=212.15.154.161 DST=192.168.1.3 LEN=48 TOS=0x10 PREC=0x20 TTL=114 ID=14189 DF PROTO=TCP SPT=2885 DPT=28992 WINDOW=16384 RES=0x00 SYN URGP=0 OPT (020405AC01010402)