!!################################ !!ALSA Information Script v 0.4.65 !!################################ !!Script ran on: Mon Aug 17 23:46:11 UTC 2020 !!Linux Distribution !!------------------ ID_LIKE=debian !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: Board Vendor: Board Name: !!ACPI Device Status Information !!--------------- !!Kernel Information !!------------------ Kernel release: 4.19.118-v7 Operating System: GNU/Linux Architecture: armv7l Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.19.118-v7 Library version: 1.1.8 Utilities version: 1.1.8 !!Loaded ALSA modules !!------------------- snd_bcm2835 snd_usb_audio snd_aloop !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [Headphones ]: bcm2835_headphonbcm2835 Headphones - bcm2835 Headphones bcm2835 Headphones 1 [CODEC ]: USB-Audio - USB Audio CODEC Burr-Brown from TI USB Audio CODEC at usb-3f980000.usb-1.3, full speed 2 [Loopback ]: Loopback - Loopback Loopback 1 !!PCI Soundcards installed in the system !!-------------------------------------- !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 snd_bcm2835: enable_compat_alsa=0 snd_bcm2835: enable_hdmi=1 snd_bcm2835: enable_headphones=1 !!Loaded sound module options !!--------------------------- !!Module: snd_bcm2835 enable_compat_alsa : N enable_hdmi : Y enable_headphones : Y force_bulk : N !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null) use_vmalloc : Y vid : -1,-1,-1,-1,-1,-1,-1,-1 !!Module: snd_aloop enable : Y,N,N,N,N,N,N,N id : (null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1 pcm_notify : 0,0,0,0,0,0,0,0 pcm_substreams : 8,8,8,8,8,8,8,8 !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x08bb2902, ctrlif=0, ctlerr=0 Card: Burr-Brown from TI USB Audio CODEC at usb-3f980000.usb-1.3, full speed Unit: 3 Control: name="PCM Playback Volume", index=0 Info: id=3, control=2, cmask=0x3, channels=2, type="S16" Volume: min=-32768, max=0, dBmin=-12800, dBmax=0 Unit: 3 Control: name="PCM Playback Switch", index=0 Info: id=3, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Aug 17 23:54 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 Aug 17 23:54 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 64 Aug 18 00:02 /dev/snd/controlC2 crw-rw---- 1 root audio 116, 16 Aug 17 23:54 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 56 Aug 17 23:54 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 48 Aug 17 23:54 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 88 Aug 18 00:02 /dev/snd/pcmC2D0c crw-rw---- 1 root audio 116, 80 Aug 18 00:02 /dev/snd/pcmC2D0p crw-rw---- 1 root audio 116, 89 Aug 18 00:02 /dev/snd/pcmC2D1c crw-rw---- 1 root audio 116, 81 Aug 18 00:02 /dev/snd/pcmC2D1p crw-rw---- 1 root audio 116, 1 Aug 17 23:54 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Aug 17 23:54 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Aug 17 23:54 . drwxr-xr-x 4 root root 320 Aug 18 00:02 .. lrwxrwxrwx 1 root root 12 Aug 17 23:54 usb-Burr-Brown_from_TI_USB_Audio_CODEC-00 -> ../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 100 Aug 18 00:02 . drwxr-xr-x 4 root root 320 Aug 18 00:02 .. lrwxrwxrwx 1 root root 12 Aug 17 23:54 platform-3f980000.usb-usb-0:1.3:1.0 -> ../controlC1 lrwxrwxrwx 1 root root 12 Aug 18 00:02 platform-snd_aloop.0 -> ../controlC2 lrwxrwxrwx 1 root root 12 Aug 17 23:54 platform-soc:audio -> ../controlC0 !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: Headphones [bcm2835 Headphones], device 0: bcm2835 Headphones [bcm2835 Headphones] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 ARECORD **** List of CAPTURE Hardware Devices **** card 1: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 !!Amixer output !!------------- !!-------Mixer controls for card Headphones Card hw:0 'Headphones'/'bcm2835 Headphones' Mixer name : 'Broadcom Mixer' Components : '' Controls : 2 Simple ctrls : 1 Simple mixer control 'Headphone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -2000 [77%] [-20.00dB] [on] !!-------Mixer controls for card CODEC Card hw:1 'CODEC'/'Burr-Brown from TI USB Audio CODEC at usb-3f980000.usb-1.3, full speed' Mixer name : 'USB Mixer' Components : 'USB08bb:2902' Controls : 5 Simple ctrls : 1 Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 128 Mono: Front Left: Playback 114 [89%] [-14.00dB] [on] Front Right: Playback 110 [86%] [-18.00dB] [on] !!-------Mixer controls for card Loopback Card hw:2 'Loopback'/'Loopback 1' Mixer name : 'Loopback Mixer' Components : '' Controls : 96 Simple ctrls : 0 !!Alsactl output !!-------------- --startcollapse-- state.Headphones { control.1 { iface MIXER name 'Headphone Playback Volume' value -2000 comment { access 'read write' type INTEGER count 1 range '-10239 - 400' dbmin -9999999 dbmax 400 dbvalue.0 -2000 } } control.2 { iface MIXER name 'Headphone Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } } state.CODEC { control.1 { iface PCM name 'Playback Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.2 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.3 { iface MIXER name 'PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.4 { iface MIXER name 'PCM Playback Volume' value.0 114 value.1 110 comment { access 'read write' type INTEGER count 2 range '0 - 128' dbmin -12800 dbmax 0 dbvalue.0 -1400 dbvalue.1 -1800 } } control.5 { iface CARD name 'Keep Interface' value false comment { access 'read write' type BOOLEAN count 1 } } } state.Loopback { control.1 { iface PCM name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.2 { iface PCM name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface PCM name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.4 { iface PCM name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.5 { iface PCM name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.6 { iface PCM name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.7 { iface PCM subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.8 { iface PCM subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface PCM subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.10 { iface PCM subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.11 { iface PCM subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.12 { iface PCM subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.13 { iface PCM subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.14 { iface PCM subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface PCM subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.16 { iface PCM subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.17 { iface PCM subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.18 { iface PCM subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.19 { iface PCM subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.20 { iface PCM subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.21 { iface PCM subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.22 { iface PCM subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.23 { iface PCM subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.24 { iface PCM subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.25 { iface PCM subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.26 { iface PCM subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.27 { iface PCM subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.28 { iface PCM subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.29 { iface PCM subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.30 { iface PCM subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.31 { iface PCM subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.32 { iface PCM subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.33 { iface PCM subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.34 { iface PCM subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.35 { iface PCM subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.36 { iface PCM subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.37 { iface PCM subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.38 { iface PCM subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.39 { iface PCM subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.40 { iface PCM subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.41 { iface PCM subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.42 { iface PCM subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.43 { iface PCM subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.44 { iface PCM subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.45 { iface PCM subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.46 { iface PCM subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.47 { iface PCM subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.48 { iface PCM subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.49 { iface PCM device 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.50 { iface PCM device 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.51 { iface PCM device 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.52 { iface PCM device 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.53 { iface PCM device 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.54 { iface PCM device 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.55 { iface PCM device 1 subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.56 { iface PCM device 1 subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.57 { iface PCM device 1 subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.58 { iface PCM device 1 subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.59 { iface PCM device 1 subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.60 { iface PCM device 1 subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.61 { iface PCM device 1 subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.62 { iface PCM device 1 subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.63 { iface PCM device 1 subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.64 { iface PCM device 1 subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.65 { iface PCM device 1 subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.66 { iface PCM device 1 subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.67 { iface PCM device 1 subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.68 { iface PCM device 1 subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.69 { iface PCM device 1 subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.70 { iface PCM device 1 subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.71 { iface PCM device 1 subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.72 { iface PCM device 1 subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.73 { iface PCM device 1 subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.74 { iface PCM device 1 subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.75 { iface PCM device 1 subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.76 { iface PCM device 1 subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.77 { iface PCM device 1 subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.78 { iface PCM device 1 subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.79 { iface PCM device 1 subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.80 { iface PCM device 1 subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.81 { iface PCM device 1 subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.82 { iface PCM device 1 subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.83 { iface PCM device 1 subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.84 { iface PCM device 1 subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.85 { iface PCM device 1 subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.86 { iface PCM device 1 subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.87 { iface PCM device 1 subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.88 { iface PCM device 1 subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.89 { iface PCM device 1 subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.90 { iface PCM device 1 subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.91 { iface PCM device 1 subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.92 { iface PCM device 1 subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.93 { iface PCM device 1 subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.94 { iface PCM device 1 subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.95 { iface PCM device 1 subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.96 { iface PCM device 1 subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } } --endcollapse-- !!All Loaded Modules !!------------------ 8021q bcm2835_codec bcm2835_mmal_vchiq bcm2835_v4l2 bluetooth bnep brcmfmac brcmutil btbcm cfg80211 cmac ecdh_generic evdev fixed garp hci_uart hwmon ip_tables ipv6 llc media raspberrypi_hwmon rfkill serdev snd snd_aloop snd_bcm2835 snd_hwdep snd_pcm snd_rawmidi snd_seq_device snd_timer snd_usb_audio snd_usbmidi_lib stp uio uio_pdrv_genirq v4l2_common v4l2_mem2mem vc_sm_cma videobuf2_common videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_vmalloc videodev x_tables !!ALSA/HDA dmesg !!-------------- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=d1bdf7dc-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) -- [ 4.760139] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 4.764981] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.766935] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. -- [ 5.105971] usbcore: registered new interface driver brcmfmac [ 5.223232] usbcore: registered new interface driver snd-usb-audio [ 5.319062] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 !!Packages installed !!-------------------- ii alsa-utils 1.1.8-2 armhf Utilities for configuring and using ALSA