!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Mon Mar 16 01:12:56 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 8.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 8.10" !!Kernel Information !!------------------ Kernel release: 2.6.27-11-generic Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: 1.0.17a Utilities version: 1.0.17 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No aRts: Installed - Yes (/usr/bin/artsd) Running - No !!Soundcards recognised by ALSA !!----------------------------- --- no soundcards --- !!PCI Soundcards installed in the system !!-------------------------------------- 01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] 02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 03) 03:06.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 01:00.1 0403: 1002:aa28 Subsystem: 1043:aa28 -- 03:06.0 0401: 1412:1724 (rev 01) Subsystem: 14c3:1704 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 3 Mar 14 22:38 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Mar 14 22:38 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # ~/.asoundrc or /etc/asound.conf # ALSA configuration file ##### USAGE ##### # Save this file as "~/.asoundrc" (for user-specific sound configuration) or # "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA # device names ad described in the next section. ##### DEVICE NAMES ##### # This configuration file defines four devices for use by the user. Those # devices are "analog", "mixed-analog", "digital", and "mixed-digital". The # user may also re-define "default" to be identical to one of the above-named # devices (i.e. to send all sound output to the digital output unless otherwise # specified). Use the device names as described below: # - "analog" outputs to the analog output directly and (at least on software # sound cards) blocks other audio output. After playback completes, "queued" # sounds are output in sequence. # - "mixed-analog" mixes audio output from multiple programs into the analog # output (so you can hear beeps, alerts, and other noises while playing back # an audio stream). # - "digital" outputs to the digital output directly. Since most (all?) # digital outputs expect 48kHz PCM audio, this may not work for some playback # (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV # recordings, etc.). # - "mixed-digital" # All other devices created within this file are used only by the configuration # file itself and should /not/ be used directly. In other words, do not use # the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital". ##### IMPORTANT ##### # To make this ALSA configuration file work with your sound card, you will need # to define the appropriate card and device information for the "analog-hw" and # "digital-hw" devices below. You can find the card and device information # using "aplay -l". ##### Configuration File ##### # Override the default output used by ALSA. If you do not override the # default, your default device is identical to the (unmixed) "analog" device # shown below. If you prefer mixed and/or digital output, uncomment the # appropriate four lines below (only one slave.pcm line). # # Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified # such that their default "default" device is identical to the "mixed-analog" # device. Whether using an ALSA version before or after 1.0.9, it does no harm # and has no affect on performance to redefine the device (even if the # redefinition does not change anything). Also, by using this ALSA # configuration file, you once again have access to unmixed analog output using # the "analog" device. pcm.!default { type plug ## Uncomment the following to use (unmixed) "analog" by default # slave.pcm "analog-hw" ## Uncomment the following to use "mixed-analog" by default # slave.pcm "dmix-analog" ## Uncomment the following to use (unmixed) "digital" by default # slave.pcm "digital-hw" ## Uncomment the following to use "mixed-digital" by default slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.!default { type hw card 0 } # Alias for (converted) analog output on the card # - This is identical to the device named "default"--which always exists and # refers to hw:0,0 (unless overridden) # - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog # output on the card # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is different from "default" and # allows playback while blocking other sound sources (until playback # completes). pcm.analog { type plug slave.pcm "analog-hw" } # Control device (mixer, etc.) for the card ctl.analog { type hw card 0 } # Alias for (converted) mixed analog output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the dmix plugin (in this case 48000Hz) # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is identical to "default" for # "software" sound cards. pcm.mixed-analog { type plug slave.pcm "dmix-analog" } # Control device (mixer, etc.) for the card ctl.mixed-analog { type hw card 0 } # Alias for (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.digital { type plug slave.pcm "digital-hw" } # Control device (mixer, etc.) for the card ctl.digital { type hw card 1 } # Alias for mixed (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.mixed-digital { type plug slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.mixed-digital { type hw card 1 } # The following devices are not useful by themselves. They require specific # rates, channels, and formats. Therefore, you probably do not want to use # them directly. Instead use of of the devices defined above. # Alias for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.analog-hw { type hw card 0 # The default value for device is 0, so no need to specify # - Uncomment one of the below or create a new "device N" line as appropriate # for your sound card or # device 1 # device 4 } # Control device (mixer, etc.) for the card ctl.analog-hw { type hw card 0 } # Alias for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.digital-hw { type hw card 1 device 3 # - Comment out "device 1" above and uncomment one of the below or create a # new "device N" line as appropriate for your sound card or # device 2 # device 4 } # Control device (mixer, etc.) for the card ctl.digital-hw { type hw card 1 } # Direct software mixing plugin for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-analog { type dmix ipc_key 1234 slave { pcm "analog-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-analog { type hw card 0 } # Direct software mixing plugin for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-digital { type dmix ipc_key 1235 slave { pcm "digital-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-digital { type hw card 0 } !!Aplay/Arecord output !!------------ APLAY aplay: device_list:215: no soundcards found... ARECORD arecord: device_list:215: no soundcards found... !!Amixer output !!------------- !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module af_packet rfcomm sco bridge stp bnep l2cap bluetooth ppdev ipv6 powernow_k8 cpufreq_powersave cpufreq_stats cpufreq_ondemand freq_table cpufreq_userspace cpufreq_conservative wmi pci_slot container video output sbs sbshc battery iptable_filter ip_tables x_tables ac lp mt2131 s5h1409 snd_hwdep ac97_bus snd_seq_dummy snd_seq_oss cx23885 snd_seq_midi snd_pcm_oss videodev snd_mixer_oss v4l1_compat compat_ioctl32 cx2341x videobuf_dma_sg snd_pcm v4l2_common snd_rawmidi psmouse snd_seq_midi_event btcx_risc serio_raw pcspkr k8temp evdev tveeprom snd_seq videobuf_dvb i2c_piix4 snd_timer snd_seq_device i2c_core dvb_core snd soundcore videobuf_core snd_page_alloc fglrx parport_pc parport button ati_agp agpgart shpchp pci_hotplug ext3 jbd mbcache usbhid hid sr_mod cdrom sd_mod crc_t10dif sg pata_atiixp pata_acpi r8169 ahci ata_generic ehci_hcd ohci_hcd mii libata scsi_mod dock usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse