!!################################ !!ALSA Information Script v 0.4.51 !!################################ !!Script ran on: Sat Oct 4 19:37:18 CEST 2008 !!Linux Distribution !!------------------ Fedora release 9 (Sulphur) Fedora release 9 (Sulphur) Fedora release 9 (Sulphur) Fedora release 9 (Sulphur) !!Kernel Information !!------------------ Kernel release: 2.6.26.3-29_1.cubbi_tuxonice.fc9.i686 Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.16 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3 !!Loaded ALSA modules !!------------------- snd_cmipci snd_mpu401 !!Soundcards recognised by ALSA !!----------------------------- 0 [CMI8738 ]: CMI8738 - C-Media CMI8738 C-Media CMI8738 (model 37) at 0xa000, irq 16 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 01:08.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 01:08.0 0401: 13f6:0111 (rev 10) Subsystem: 13f6:0111 !!Loaded sound module options !!-------------------------- !!Module: snd_cmipci enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y fm_port : 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 mpu_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 soft_ac3 : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y !!Module: snd_mpu401 enable : Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2 irq : 10,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535 pnp : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y port : 816,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 uart_enter : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 11 4. říj 18.06 /dev/snd/controlC0 crw-rw---- 1 root root 116, 4 4. říj 18.06 /dev/snd/controlC1 crw-rw---- 1 root root 116, 3 4. říj 18.06 /dev/snd/midiC1D0 crw-rw---- 1 root root 116, 10 4. říj 18.06 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 9 4. říj 18.06 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 8 4. říj 18.06 /dev/snd/pcmC0D1p crw-rw---- 1 root root 116, 7 4. říj 18.06 /dev/snd/pcmC0D2c crw-rw---- 1 root root 116, 6 4. říj 18.06 /dev/snd/pcmC0D2p crw-rw---- 1 root root 116, 5 4. říj 18.06 /dev/snd/seq crw-rw---- 1 root root 116, 2 4. říj 18.06 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY aplay: device_list:215: no soundcards found... ARECORD arecord: device_list:215: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [CMI8738] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [UART] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module bridge bnep rfcomm l2cap bluetooth fuse ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 nf_conntrack_netbios_ns ipt_REJECT xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables dm_mirror dm_log dm_multipath dm_mod ppdev snd_cmipci snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss parport_pc snd_mixer_oss snd_pcm parport nvidia snd_mpu401 floppy ns558 gameport snd_page_alloc firewire_ohci snd_opl3_lib firewire_core pcspkr snd_timer snd_hwdep crc_itu_t snd_mpu401_uart snd_rawmidi snd_seq_device sr_mod cdrom snd soundcore forcedeth sg i2c_nforce2 i2c_core ata_generic pata_acpi pata_amd libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd