!!################################ !!ALSA Information Script v 0.4.62 !!################################ !!Script ran on: Sun Dec 29 06:59:50 UTC 2013 !!Linux Distribution !!------------------ Gentoo Base System release 2.2 NAME=Gentoo ID=gentoo PRETTY_NAME="Gentoo/Linux" HOME_URL="http://www.gentoo.org/" SUPPORT_URL="http://www.gentoo.org/main/en/support.xml" BUG_REPORT_URL="https://bugs.gentoo.org/" !!DMI Information !!--------------- Manufacturer: VMware, Inc. Product Name: VMware Virtual Platform Product Version: None Firmware Version: 6.00 !!Kernel Information !!------------------ Kernel release: 3.10.17-gentoo Operating System: GNU/Linux Architecture: i686 Processor: Intel(R) Celeron(R) CPU 450 @ 2.20GHz SMP Enabled: No !!ALSA Version !!------------ Driver version: k3.10.17-gentoo Library version: 1.0.27.1 Utilities version: 1.0.27.1 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI Ensoniq AudioPCI ENS1371 at 0x2080, irq 9 !!PCI Soundcards installed in the system !!-------------------------------------- 02:02.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 02:02.0 0401: 1274:1371 (rev 02) Subsystem: 1274:1371 !!Loaded sound module options !!--------------------------- !!AC97 Codec information !!---------------------- --startcollapse-- 0-0/0: Cirrus Logic CS4297A rev 3 PCI Subsys Vendor: 0x1274 PCI Subsys Device: 0x1371 Flags: 4 Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off 0:00 = 0000 0:02 = bfbf 0:04 = 0000 0:06 = 0000 0:08 = 0000 0:0a = 0000 0:0c = bfbf 0:0e = bfbf 0:10 = bfbf 0:12 = bfbf 0:14 = bfbf 0:16 = bfbf 0:18 = bfbf 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0000 0:2a = 0000 0:2c = 0000 0:2e = 0000 0:30 = 0000 0:32 = 0000 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0000 0:76 = 0000 0:78 = 0000 0:7a = 0000 0:7c = 4352 0:7e = 5913 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 6 Dec 29 2013 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 2 Dec 29 2013 /dev/snd/midiC0D0 crw-rw---- 1 root audio 116, 5 Dec 29 2013 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 4 Dec 29 2013 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 3 Dec 29 2013 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 1 Dec 29 2013 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Dec 29 2013 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Dec 29 2013 . drwxr-xr-x 3 root root 200 Dec 29 2013 .. lrwxrwxrwx 1 root root 12 Dec 29 2013 pci-0000:02:02.0 -> ../controlC0 !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:268: no soundcards found... ARECORD arecord: device_list:268: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [AudioPCI] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module vmwgfx ttm pcnet32 mii !!ALSA/HDA dmesg !!-------------- [ 1.296476] netconsole: network logging started [ 1.297298] ALSA device list: [ 1.297314] #0: Ensoniq AudioPCI ENS1371 at 0x2080, irq 9