!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Tue May 5 18:45:23 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 8.10 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 8.10" !!Kernel Information !!------------------ Kernel release: 2.6.27-14-generic Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.19 Library version: 1.0.19 Utilities version: 1.0.17 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- aRts: Installed - Yes (/usr/bin/artsd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfbe78000 irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:07.0 Audio device: nVidia Corporation Realtek ALC1200 8-Channel High Definition Audio Codec (rev a1) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:07.0 0403: 10de:0774 (rev a1) Subsystem: 10de:cb84 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,, position_fix : 0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1 probe_only : N,N,N,N,N,N,N,N single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Nvidia MCP78 HDMI Address: 3 Vendor Id: 0x10de0002 Subsystem Id: 0x10de0101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Enabled GenLevel Digital category: 0x2 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x18560110: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560121: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x1 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560122: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x2 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560123: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x3 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0xc0]: 48000 88200 bits [0xf]: 8 16 20 24 formats [0x1]: PCM Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x58560124: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x4 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 1 0x0c --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 May 5 14:24 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 7 May 5 14:24 /dev/snd/hwC0D3 crw-rw---- 1 root audio 116, 19 May 5 14:28 /dev/snd/pcmC0D3p crw-rw---- 1 root audio 116, 1 May 5 14:24 /dev/snd/seq crw-rw---- 1 root audio 116, 33 May 5 14:24 /dev/snd/timer !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # ALSA library configuration file # Include settings that are under the control of asoundconf(1). # (To disable these settings, comment out this line.) !!asoundconf-generated config file # ALSA library configuration file managed by asoundconf(1). # # MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN! # # Manual changes to the ALSA library configuration should be implemented # by editing the ~/.asoundrc file, not by editing this file. !defaults.pcm.card NVidia defaults.ctl.card NVidia defaults.pcm.device 0 defaults.pcm.subdevice -1 defaults.pcm.nonblock 1 defaults.pcm.ipc_key 5678293 defaults.pcm.ipc_gid audio defaults.pcm.ipc_perm 0660 defaults.pcm.dmix.max_periods 0 defaults.pcm.dmix.rate 48000 defaults.pcm.dmix.format "unchanged" defaults.pcm.dmix.card defaults.pcm.card defaults.pcm.dmix.device defaults.pcm.device defaults.pcm.dsnoop.card defaults.pcm.card defaults.pcm.dsnoop.device defaults.pcm.device defaults.pcm.front.card defaults.pcm.card defaults.pcm.front.device defaults.pcm.device defaults.pcm.rear.card defaults.pcm.card defaults.pcm.rear.device defaults.pcm.device defaults.pcm.center_lfe.card defaults.pcm.card defaults.pcm.center_lfe.device defaults.pcm.device defaults.pcm.side.card defaults.pcm.card defaults.pcm.side.device defaults.pcm.device defaults.pcm.surround40.card defaults.pcm.card defaults.pcm.surround40.device defaults.pcm.device defaults.pcm.surround41.card defaults.pcm.card defaults.pcm.surround41.device defaults.pcm.device defaults.pcm.surround50.card defaults.pcm.card defaults.pcm.surround50.device defaults.pcm.device defaults.pcm.surround51.card defaults.pcm.card defaults.pcm.surround51.device defaults.pcm.device defaults.pcm.surround71.card defaults.pcm.card defaults.pcm.surround71.device defaults.pcm.device defaults.pcm.iec958.card defaults.pcm.card defaults.pcm.iec958.device defaults.pcm.device defaults.pcm.modem.card defaults.pcm.card defaults.pcm.modem.device defaults.pcm.device defaults.pcm.file_format "raw" defaults.pcm.file_truncate true defaults.rawmidi.card 0 defaults.rawmidi.device 0 defaults.rawmidi.subdevice -1 defaults.hwdep.card 0 defaults.hwdep.device 0 defaults.timer.class 2 defaults.timer.sclass 0 defaults.timer.card 0 defaults.timer.device 0 defaults.timer.subdevice 0 defaults.namehint.showall off defaults.namehint.basic on defaults.namehint.extended off !!System wide config file (/etc/asound.conf) #ALSA configuration file ##### USAGE ##### # Save this file as "~/.asoundrc" (for user-specific sound configuration) or # "/etc/asound.conf" (for system-wide sound configuration) and specify ALSA # device names ad described in the next section. ##### DEVICE NAMES ##### # This configuration file defines four devices for use by the user. Those # devices are "analog", "mixed-analog", "digital", and "mixed-digital". The # user may also re-define "default" to be identical to one of the above-named # devices (i.e. to send all sound output to the digital output unless otherwise # specified). Use the device names as described below: # - "analog" outputs to the analog output directly and (at least on software # sound cards) blocks other audio output. After playback completes, "queued" # sounds are output in sequence. # - "mixed-analog" mixes audio output from multiple programs into the analog # output (so you can hear beeps, alerts, and other noises while playing back # an audio stream). # - "digital" outputs to the digital output directly. Since most (all?) # digital outputs expect 48kHz PCM audio, this may not work for some playback # (i.e. CD's--which are 44.1kHz PCM audio--or 32kHz audio streams from TV # recordings, etc.). # - "mixed-digital" # All other devices created within this file are used only by the configuration # file itself and should /not/ be used directly. In other words, do not use # the devices "analog-hw", "dmix-analog", "digital-hw", or "dmix-digital". ##### IMPORTANT ##### # To make this ALSA configuration file work with your sound card, you will need # to define the appropriate card and device information for the "analog-hw" and # "digital-hw" devices below. You can find the card and device information # using "aplay -l". ##### Configuration File ##### # Override the default output used by ALSA. If you do not override the # default, your default device is identical to the (unmixed) "analog" device # shown below. If you prefer mixed and/or digital output, uncomment the # appropriate four lines below (only one slave.pcm line). # # Note, also, that as of ALSA 1.0.9, "software" sound cards have been modified # such that their default "default" device is identical to the "mixed-analog" # device. Whether using an ALSA version before or after 1.0.9, it does no harm # and has no affect on performance to redefine the device (even if the # redefinition does not change anything). Also, by using this ALSA # configuration file, you once again have access to unmixed analog output using # the "analog" device. pcm.!default { type plug ## Uncomment the following to use (unmixed) "analog" by default # slave.pcm "analog-hw" ## Uncomment the following to use "mixed-analog" by default # slave.pcm "dmix-analog" ## Uncomment the following to use (unmixed) "digital" by default slave.pcm "digital-hw" ## Uncomment the following to use "mixed-digital" by default # slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.!default { type hw card 0 } # Alias for (converted) analog output on the card # - This is identical to the device named "default"--which always exists and # refers to hw:0,0 (unless overridden) # - Therefore, we can specify "hw:0,0", "default", or "analog" to access analog # output on the card # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is different from "default" and # allows playback while blocking other sound sources (until playback # completes). pcm.analog { type plug slave.pcm "analog-hw" } # Control device (mixer, etc.) for the card ctl.analog { type hw card 0 } # Alias for (converted) mixed analog output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the dmix plugin (in this case 48000Hz) # - Note that as of ALSA 1.0.9, "software" sound card definitions redefine # "default" to do mixing, meaning this device is identical to "default" for # "software" sound cards. pcm.mixed-analog { type plug slave.pcm "dmix-analog" } # Control device (mixer, etc.) for the card ctl.mixed-analog { type hw card 0 } # Alias for (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.digital { type plug slave.pcm "digital-hw" } # Control device (mixer, etc.) for the card ctl.digital { type hw card 0 } # Alias for mixed (converted) digital (S/PDIF) output on the card # - This will accept audio input--regardless of rate--and convert to the rate # required for the S/PDIF hardware (in this case 48000Hz) pcm.mixed-digital { type plug slave.pcm "dmix-digital" } # Control device (mixer, etc.) for the card ctl.mixed-digital { type hw card 0 } # The following devices are not useful by themselves. They require specific # rates, channels, and formats. Therefore, you probably do not want to use # them directly. Instead use of of the devices defined above. # Alias for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.analog-hw { type hw card 0 # The default value for device is 0, so no need to specify # - Uncomment one of the below or create a new "device N" line as appropriate # for your sound card or # device 1 # device 4 } # Control device (mixer, etc.) for the card ctl.analog-hw { type hw card 0 } # Alias for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.digital-hw { type hw card 0 device 3 # - Comment out "device 1" above and uncomment one of the below or create a # new "device N" line as appropriate for your sound card or # device 2 # device 4 } # Control device (mixer, etc.) for the card ctl.digital-hw { type hw card 0 } # Direct software mixing plugin for analog output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-analog { type dmix ipc_key 1234 slave { pcm "analog-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-analog { type hw card 0 } # Direct software mixing plugin for digital (S/PDIF) output on the card # Do not use this directly--it requires specific rate, channels, and format pcm.dmix-digital { type dmix ipc_key 1235 slave { pcm "digital-hw" period_time 0 period_size 1024 buffer_size 4096 rate 48000 } } # Control device (mixer, etc.) for the card ctl.dmix-digital { type hw card 0 } A A A A A A A A !!Aplay/Arecord output !!------------ APLAY **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Card hw:0 'NVidia'/'HDA NVidia at 0xfbe78000 irq 22' Mixer name : 'Nvidia MCP78 HDMI' Components : 'HDA:10de0002,10de0101,00100000' Controls : 6 Simple ctrls : 3 Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 255 [100%] [0.00dB] Front Right: Playback 255 [100%] [0.00dB] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'hdmi_volume',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 255 Front Left: 255 [100%] Front Right: 255 [100%] !!Alsactl output !!------------- --startcollapse-- state.NVidia { control.1 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.2 { comment.access read comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.3 { comment.access 'read write' comment.type IEC958 comment.count 1 iface MIXER name 'IEC958 Playback Default' value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' } control.4 { comment.access 'read write' comment.type BOOLEAN comment.count 1 iface MIXER name 'IEC958 Playback Switch' value true } control.5 { comment.access 'read write user' comment.type INTEGER comment.count 2 comment.range '0 - 255' comment.tlv '0000000100000008ffffec1400000014' comment.dbmin -5100 comment.dbmax 0 iface MIXER name 'PCM Playback Volume' value.0 255 value.1 255 } control.6 { comment.access 'read write user' comment.type INTEGER comment.count 2 comment.range '0 - 255' comment.tlv '0000000100000008ffffec1400000014' comment.dbmin -5100 comment.dbmax 0 iface MIXER name hdmi_volume value.0 255 value.1 255 } } --endcollapse-- !!All Loaded Modules !!------------------ Module ipv6 af_packet rfcomm bridge stp bnep sco l2cap bluetooth ppdev cpufreq_conservative cpufreq_stats cpufreq_ondemand freq_table cpufreq_powersave cpufreq_userspace sbs sbshc pci_slot video output container battery iptable_filter ip_tables x_tables ac parport_pc lp parport snd_hda_codec_nvhdmi nvidia joydev agpgart pcspkr evdev snd_hda_intel snd_hda_codec i2c_core snd_hwdep snd_pcm_oss snd_mixer_oss wmi snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore button snd_page_alloc shpchp pci_hotplug ext3 jbd mbcache sd_mod crc_t10dif sr_mod cdrom usbhid hid sg pata_acpi ata_generic ahci pata_amd libata r8169 sky2 mii ehci_hcd scsi_mod ohci_hcd dock usbcore thermal processor fan fbcon tileblit font bitblit softcursor fuse