!!################################ !!ALSA Information Script v 0.4.60 !!################################ !!Script ran on: Fri Dec 30 01:13:24 UTC 2011 !!Linux Distribution !!------------------ Gentoo Base System release 2.0.3 !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: !!Kernel Information !!------------------ Kernel release: 3.1.6 Operating System: GNU/Linux Architecture: i686 Processor: Pentium III (Katmai) SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.24 Library version: 1.0.24.1 Utilities version: 1.0.24.2 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [FM801AU ]: FM801 - ForteMedia FM801-AU ForteMedia FM801-AU at 0xd000, irq 4 !!PCI Soundcards installed in the system !!-------------------------------------- 00:09.0 Multimedia audio controller: Fortemedia, Inc Xwave QS3000A [FM801] (rev b1) 00:0b.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!-------------------------------------------------------- 00:09.0 0401: 1319:0801 (rev b1) Subsystem: 1319:1319 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Wolfson WM9701,WM9701A PCI Subsys Vendor: 0x0000 PCI Subsys Device: 0x0000 Flags: 0 Capabilities : DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off 0:00 = 0140 0:02 = 9f1f 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0000 0:2a = 0000 0:2c = 0000 0:2e = 0000 0:30 = 0000 0:32 = 0000 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 0000 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0000 0:76 = 0000 0:78 = 0000 0:7a = 0000 0:7c = 574d 0:7e = 4c00 --endcollapse-- !!ALSA Device nodes !!----------------- !!Aplay/Arecord output !!------------ APLAY aplay: device_list:240: no soundcards found... ARECORD arecord: device_list:240: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [FM801AU] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module !!ALSA/HDA dmesg !!------------------ [ 1.040147] hub 1-0:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.091861] ALSA device list: [ 1.094690] #0: ForteMedia FM801-AU at 0xd000, irq 4