!!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Wed May 23 03:10:22 UTC 2018 !!Linux Distribution !!------------------ ID_LIKE=debian !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: !!Kernel Information !!------------------ Kernel release: 4.14.34-v7 Operating System: GNU/Linux Architecture: armv7l Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.14.34-v7 Library version: 1.1.3 Utilities version: 1.1.3 !!Loaded ALSA modules !!------------------- snd_bcm2835 snd_usb_audio !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA bcm2835 ALSA 1 [CODEC ]: USB-Audio - USB Audio CODEC Burr-Brown from TI USB Audio CODEC at usb-3f980000.usb-1.3, full speed !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!Module: snd_bcm2835 enable_compat_alsa : Y enable_hdmi : N enable_headphones : N force_bulk : N !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null) vid : -1,-1,-1,-1,-1,-1,-1,-1 !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x08bb29b0, ctrlif=0, ctlerr=0 Card: Burr-Brown from TI USB Audio CODEC at usb-3f980000.usb-1.3, full speed Unit: 3 Control: name="PCM Playback Volume", index=0 Info: id=3, control=2, cmask=0x3, channels=2, type="S16" Volume: min=-19456, max=0, dBmin=-7600, dBmax=0 Unit: 3 Control: name="PCM Playback Switch", index=0 Info: id=3, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 May 22 23:03 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 May 22 23:03 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 16 May 22 23:03 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 17 May 22 23:03 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 56 May 22 23:03 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 48 May 22 23:05 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 1 May 22 23:03 /dev/snd/seq crw-rw---- 1 root audio 116, 33 May 22 23:03 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 May 22 23:03 . drwxr-xr-x 4 root root 240 May 22 23:03 .. lrwxrwxrwx 1 root root 12 May 22 23:03 usb-Burr-Brown_from_TI_USB_Audio_CODEC-00 -> ../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 May 22 23:03 . drwxr-xr-x 4 root root 240 May 22 23:03 .. lrwxrwxrwx 1 root root 12 May 22 23:03 platform-3f980000.usb-usb-0:1.3:1.0 -> ../controlC1 lrwxrwxrwx 1 root root 12 May 22 23:03 platform-soc:audio -> ../controlC0 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) pcm.!default { type asym playback.pcm { type plug slave.pcm "hw:0,0" } capture.pcm { type plug slave.pcm "hw:1,0" } } !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:270: no soundcards found... ARECORD arecord: device_list:270: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [ALSA] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [CODEC] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module fuse cfg80211 rfkill evdev snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_seq_device uio_pdrv_genirq uio fixed snd_bcm2835 snd_pcm snd_timer snd i2c_dev ip_tables x_tables ipv6 !!ALSA/HDA dmesg !!-------------- [ 4.743506] i2c /dev entries driver [ 4.852303] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.878105] bcm2835_alsa bcm2835_alsa: card created with 8 channels -- [ 5.866040] systemd-journald[105]: Received request to flush runtime journal from PID 1 [ 6.989300] usbcore: registered new interface driver snd-usb-audio [ 8.987076] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup