!!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Sun Apr 12 10:36:05 UTC 2020 !!Linux Distribution !!------------------ ID_LIKE=debian !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: Board Vendor: Board Name: !!ACPI Device Status Information !!--------------- !!Kernel Information !!------------------ Kernel release: 4.19.97-v7l Operating System: GNU/Linux Architecture: armv7l Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.19.97-v7l Library version: 1.1.8 Utilities version: 1.1.8 !!Loaded ALSA modules !!------------------- snd_aloop snd_bcm2835 snd_usb_audio !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [Loopback ]: Loopback - Loopback Loopback 1 1 [ALSA ]: bcm2835_alsa - bcm2835 ALSA bcm2835 ALSA 2 [Edition ]: USB-Audio - Logi 4K Stream Edition Logi 4K Stream Edition at usb-0000:01:00.0-1, super speed !!PCI Soundcards installed in the system !!-------------------------------------- !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!Module: snd_aloop enable : Y,N,N,N,N,N,N,N id : (null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1 pcm_notify : 0,0,0,0,0,0,0,0 pcm_substreams : 8,8,8,8,8,8,8,8 !!Module: snd_bcm2835 enable_compat_alsa : Y enable_hdmi : N enable_headphones : N force_bulk : N !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null) use_vmalloc : Y vid : -1,-1,-1,-1,-1,-1,-1,-1 !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x046d086b, ctrlif=3, ctlerr=0 Card: Logi 4K Stream Edition at usb-0000:01:00.0-1, super speed Unit: 5 Control: name="Mic Capture Volume", index=0 Info: id=5, control=2, cmask=0x0, channels=1, type="S16" Volume: min=4608, max=13824, dBmin=1800, dBmax=5400 Unit: 5 Control: name="Mic Capture Switch", index=0 Info: id=5, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Apr 12 12:17 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 Apr 12 12:17 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 64 Apr 12 12:23 /dev/snd/controlC2 crw-rw---- 1 root audio 116, 24 Apr 12 12:17 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 16 Apr 12 12:17 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 25 Apr 12 12:17 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 17 Apr 12 12:17 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 48 Apr 12 12:17 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 49 Apr 12 12:17 /dev/snd/pcmC1D1p crw-rw---- 1 root audio 116, 50 Apr 12 12:17 /dev/snd/pcmC1D2p crw-rw---- 1 root audio 116, 88 Apr 12 12:23 /dev/snd/pcmC2D0c crw-rw---- 1 root audio 116, 1 Apr 12 12:17 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Apr 12 12:17 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Apr 12 12:23 . drwxr-xr-x 4 root root 340 Apr 12 12:23 .. lrwxrwxrwx 1 root root 12 Apr 12 12:23 usb-046d_Logi_4K_Stream_Edition_53128010-03 -> ../controlC2 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 100 Apr 12 12:23 . drwxr-xr-x 4 root root 340 Apr 12 12:23 .. lrwxrwxrwx 1 root root 12 Apr 12 12:23 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1:1.3 -> ../controlC2 lrwxrwxrwx 1 root root 12 Apr 12 12:17 platform-snd_aloop.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Apr 12 12:17 platform-soc:audio -> ../controlC1 !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 1: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 1: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Edition [Logi 4K Stream Edition], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [Loopback] Card hw:0 'Loopback'/'Loopback 1' Mixer name : 'Loopback Mixer' Components : '' Controls : 96 Simple ctrls : 0 !!-------Mixer controls for card 1 [ALSA] Card hw:1 'ALSA'/'bcm2835 ALSA' Mixer name : 'Broadcom Mixer' Components : '' Controls : 5 Simple ctrls : 1 Simple mixer control 'PCM',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -131 [95%] [-1.31dB] [on] !!-------Mixer controls for card 2 [Edition] Card hw:2 'Edition'/'Logi 4K Stream Edition at usb-0000:01:00.0-1, super speed' Mixer name : 'USB Mixer' Components : 'USB046d:086b' Controls : 4 Simple ctrls : 1 Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined Capture channels: Mono Limits: Capture 0 - 72 Mono: Capture 44 [61%] [40.00dB] [on] !!Alsactl output !!-------------- --startcollapse-- state.Loopback { control.1 { iface PCM name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.2 { iface PCM name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface PCM name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.4 { iface PCM name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.5 { iface PCM name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.6 { iface PCM name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.7 { iface PCM subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.8 { iface PCM subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface PCM subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.10 { iface PCM subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.11 { iface PCM subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.12 { iface PCM subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.13 { iface PCM subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.14 { iface PCM subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface PCM subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.16 { iface PCM subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.17 { iface PCM subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.18 { iface PCM subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.19 { iface PCM subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.20 { iface PCM subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.21 { iface PCM subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.22 { iface PCM subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.23 { iface PCM subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.24 { iface PCM subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.25 { iface PCM subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.26 { iface PCM subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.27 { iface PCM subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.28 { iface PCM subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.29 { iface PCM subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.30 { iface PCM subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.31 { iface PCM subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.32 { iface PCM subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.33 { iface PCM subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.34 { iface PCM subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.35 { iface PCM subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.36 { iface PCM subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.37 { iface PCM subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.38 { iface PCM subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.39 { iface PCM subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.40 { iface PCM subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.41 { iface PCM subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.42 { iface PCM subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.43 { iface PCM subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.44 { iface PCM subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.45 { iface PCM subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.46 { iface PCM subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.47 { iface PCM subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.48 { iface PCM subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.49 { iface PCM device 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.50 { iface PCM device 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.51 { iface PCM device 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.52 { iface PCM device 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.53 { iface PCM device 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.54 { iface PCM device 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.55 { iface PCM device 1 subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.56 { iface PCM device 1 subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.57 { iface PCM device 1 subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.58 { iface PCM device 1 subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.59 { iface PCM device 1 subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.60 { iface PCM device 1 subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.61 { iface PCM device 1 subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.62 { iface PCM device 1 subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.63 { iface PCM device 1 subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.64 { iface PCM device 1 subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.65 { iface PCM device 1 subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.66 { iface PCM device 1 subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.67 { iface PCM device 1 subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.68 { iface PCM device 1 subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.69 { iface PCM device 1 subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.70 { iface PCM device 1 subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.71 { iface PCM device 1 subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.72 { iface PCM device 1 subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.73 { iface PCM device 1 subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.74 { iface PCM device 1 subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.75 { iface PCM device 1 subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.76 { iface PCM device 1 subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.77 { iface PCM device 1 subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.78 { iface PCM device 1 subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.79 { iface PCM device 1 subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.80 { iface PCM device 1 subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.81 { iface PCM device 1 subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.82 { iface PCM device 1 subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.83 { iface PCM device 1 subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.84 { iface PCM device 1 subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.85 { iface PCM device 1 subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.86 { iface PCM device 1 subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.87 { iface PCM device 1 subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.88 { iface PCM device 1 subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.89 { iface PCM device 1 subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.90 { iface PCM device 1 subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.91 { iface PCM device 1 subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.92 { iface PCM device 1 subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.93 { iface PCM device 1 subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.94 { iface PCM device 1 subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.95 { iface PCM device 1 subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.96 { iface PCM device 1 subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } } state.ALSA { control.1 { iface MIXER name 'PCM Playback Volume' value -131 comment { access 'read write' type INTEGER count 1 range '-10239 - 400' dbmin -9999999 dbmax 400 dbvalue.0 -131 } } control.2 { iface MIXER name 'PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'PCM Playback Route' value 0 comment { access 'read write' type INTEGER count 1 range '0 - 3' } } control.4 { iface PCM name 'IEC958 Playback Default' value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface PCM name 'IEC958 Playback Con Mask' value '0200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } } state.Edition { control.1 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } control.2 { iface MIXER name 'Mic Capture Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'Mic Capture Volume' value 44 comment { access 'read write' type INTEGER count 1 range '0 - 72' dbmin 1800 dbmax 5400 dbvalue.0 4000 } } control.4 { iface CARD name 'Keep Interface' value false comment { access 'read write' type BOOLEAN count 1 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module evdev snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_seq_device uvcvideo rfcomm bnep hci_uart btbcm serdev bluetooth ecdh_generic 8021q garp stp llc spidev brcmfmac brcmutil sha256_generic vc4 v3d cfg80211 drm_kms_helper gpu_sched rfkill drm raspberrypi_hwmon drm_panel_orientation_quirks snd_soc_core snd_bcm2835 i2c_bcm2835 snd_compress snd_pcm_dmaengine syscopyarea sysfillrect sysimgblt fb_sys_fops spi_bcm2835 bcm2835_v4l2 bcm2835_codec v4l2_mem2mem v4l2_common bcm2835_mmal_vchiq videobuf2_dma_contig videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 vc_sm_cma videobuf2_common videodev media w1_gpio rpivid_mem wire cn hwmon uio_pdrv_genirq uio snd_aloop snd_pcm snd_timer snd i2c_dev ip_tables x_tables ipv6 !!ALSA/HDA dmesg !!-------------- [ 4.840599] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 4.877325] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.913233] bcm2835_audio soc:audio: card created with 8 channels [ 5.150859] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 5.179044] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 5.179133] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) -- [ 386.183194] usb 2-1: current rate 16000 is different from the runtime rate 48000 [ 386.189573] usbcore: registered new interface driver snd-usb-audio [ 391.143811] w1_master_driver w1_bus_master1: Attaching one wire slave 00.e00000000000 crc e9