!!################################ !!ALSA Information Script v 0.4.61 !!################################ !!Script ran on: Wed Jul 11 14:57:30 UTC 2012 !!Linux Distribution !!------------------ CentOS release 6.2 (Final) CentOS release 6.2 (Final) CentOS release 6.2 (Final) CentOS release 6.2 (Final) !!DMI Information !!--------------- Manufacturer: innotek GmbH Product Name: VirtualBox Product Version: 1.2 Firmware Version: VirtualBox !!Kernel Information !!------------------ Kernel release: 2.6.32-220.23.1.el6.x86_64 Operating System: GNU/Linux Architecture: x86_64 Processor: x86_64 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.21 Library version: Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- snd_hda_intel !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf0804000 irq 21 !!PCI Soundcards installed in the system !!-------------------------------------- 00:05.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 01) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:05.0 0403: 8086:2668 (rev 01) Subsystem: 8384:7680 !!Loaded sound module options !!--------------------------- !!Module: snd_hda_intel bdl_pos_adj : 1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: SigmaTel STAC9221 A1 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x83847680 Subsystem Id: 0x83847680 Revision Id: 0x103401 No Modem Function Group found Default PCM: rates [0x20]: 44100 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=4, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=0, dir=1, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=1, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=63 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=63 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="STAC92xx Analog", type="Audio", device=0 Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo Device: name="STAC92xx Analog", type="Audio", device=0 Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x17 Processing caps: benign=0, ncoeff=0 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D0, actual=D0 Delay: 13 samples Connection: 1 0x18 Processing caps: benign=0, ncoeff=0 Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="IEC958 Default PCM Playback Switch", index=0, device=0 Device: name="STAC92xx Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x20]: 44100 bits [0x2]: 16 formats [0x1]: PCM Delay: 4 samples Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital Device: name="STAC92xx Digital", type="SPDIF", device=1 Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x20]: 44100 bits [0x2]: 16 formats [0x1]: PCM Delay: 4 samples Connection: 1 0x11 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x0121e21f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = White DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0x60: IN OUT VREF_HIZ Unsolicited: tag=01, enabled=1 Connection: 1 0x02 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x90a7012e: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x2, Sequence = 0xe Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x04 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x9017e110: [Fixed] Speaker at Int N/A Conn = Analog, Color = White DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00001737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x400000fd: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xd Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00000034: IN OUT Detect Pin Default 0x400000fe: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xe Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x0f [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Pincap 0x00000034: IN OUT Detect Pin Default 0x0181e020: [Jack] Line In at Ext Rear Conn = 1/8, Color = White DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=02, enabled=1 Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x1145e230: [Jack] SPDIF Out at Int Rear Conn = Optical, Color = White DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 3 0x08* 0x17 0x19 Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x00010024: IN EAPD Detect EAPD 0x0: Pin Default 0x11c5e240: [Jack] SPDIF In at Int Rear Conn = Optical, Color = White DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Power: setting=D0, actual=D0 Delay: 3 samples Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Mux Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Control: name="Mux Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 7 0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x15 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x00000020: IN Pin Default 0x400000fc: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xc Pin-ctls: 0x00: Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono Volume-Knob: delta=1, steps=127, direct=1, val=127 Connection: 4 0x02 0x03 0x04 0x05 Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x12 Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L Control: name="Capture Volume", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=1, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: N/A Amp-In vals: [0x80 0x80] Connection: 1 0x13 Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Delay: 3 samples Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 Delay: 3 samples Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x400000fb: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0xb Pin-ctls: 0x00: Connection: 1 0x1a --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 9 Jul 11 08:51 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 8 Jul 11 08:51 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 7 Jul 11 08:51 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 6 Jul 11 08:51 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 5 Jul 11 08:51 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 4 Jul 11 08:51 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 3 Jul 11 08:51 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Jul 11 08:51 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Jul 11 08:51 . drwxr-xr-x 3 root root 220 Jul 11 08:51 .. lrwxrwxrwx 1 root root 12 Jul 11 08:51 pci-0000:00:05.0 -> ../controlC0 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:244: no soundcards found... ARECORD arecord: device_list:244: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [Intel] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module ipv6 vboxsf ppdev parport_pc parport sg vboxguest i2c_piix4 i2c_core e1000 snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom ahci pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod !!ALSA/HDA dmesg !!-------------- udev: starting version 147 HDA Intel 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 HDA Intel 0000:00:05.0: setting latency timer to 64 hda_codec: STAC922x, Apple subsys_id=83847680 input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/0000:00:05.0/sound/card0/input5 input: HDA Intel HP Out at Ext Rear Jack as /devices/pci0000:00/0000:00:05.0/sound/card0/input6 e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-1-NAPI