!!################################
!!ALSA Information Script v 0.4.52
!!################################

!!Script ran on: Mon Dec 22 20:43:54 GMT 2008


!!Linux Distribution
!!------------------

Gentoo Base System release 1.12.11.1


!!Kernel Information
!!------------------

Kernel release:    2.6.26-gentoo-r4
Operating System:  GNU/Linux
Architecture:      i686
Processor:         Intel(R) Celeron(R) M processor 1.50GHz
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     1.0.16
Library version:    1.0.16
Utilities version:  1.0.16


!!Loaded ALSA modules
!!-------------------



!!Soundcards recognised by ALSA
!!-----------------------------

 0 [IXP            ]: ATIIXP - ATI IXP
                      ATI IXP rev 2 with unknown codec at 0xc0003400, irq 17


!!PCI Soundcards installed in the system
!!--------------------------------------

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)


!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------

00:14.5 0401: 1002:4370 (rev 02)
	Subsystem: 1179:ff31


!!Loaded sound module options
!!--------------------------


!!AC97 Codec information
!!---------------------------
--startcollapse--

0-0/0: Conexant id 30

PCI Subsys Vendor: 0x1179
PCI Subsys Device: 0xff31

Revision         : 0x00
Compat. Class    : 0x00
Subsys. Vendor ID: 0x0000
Subsys. ID       : 0x0000

Capabilities     : -reserved1- -headphone out-
DAC resolution   : 18-bit
ADC resolution   : 18-bit
3D enhancement   : No 3D Stereo Enhancement

Current setup
Mic gain         :  0dB [ 0dB]
POP path         : pre 3D
Sim. stereo      : off
3D enhancement   : off
Loudness         : off
Mono output      : MIX
Mic select       : Mic1
ADC/DAC loopback : off
Extended ID      : codec=0 rev=2 AMAP DSA=0 SPDIF
Extended status  : PRL PRK PRJ PRI SPCV SPDIF=7/8
SPDIF Control    : Consumer PCM Copyright Category=0x22 Generation=1 Rate=48kHz
Extended modem ID: codec=0 LIN1
Modem status     : PRA(GPIO)
Line1 rate       : 48000Hz

0:00 = 0152
0:02 = 8909
0:04 = 8b0b
0:06 = 0000
0:08 = 0000
0:0a = 8000
0:0c = 0000
0:0e = 801f
0:10 = 9f1f
0:12 = 9f1f
0:14 = 0000
0:16 = 0000
0:18 = 9f1f
0:1a = 0000
0:1c = 0000
0:1e = 0000
0:20 = 0000
0:22 = 0000
0:24 = 0000
0:26 = 000f
0:28 = 0a04
0:2a = 7c10
0:2c = bb80
0:2e = 0000
0:30 = 0000
0:32 = bb80
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 2a20
0:3c = 0001
0:3e = 0100
0:40 = bb80
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0030
0:4e = ffff
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0600
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0012
0:68 = 0000
0:6a = 0000
0:6c = 0000
0:6e = 0000
0:70 = 0000
0:72 = 0000
0:74 = 0000
0:76 = 0000
0:78 = 0000
0:7a = 8004
0:7c = 4358
0:7e = 5430
--endcollapse--


!!ALSA Device nodes
!!-----------------

crw-rw---- 1 root audio 116,  0 Dec 22 19:35 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 24 Dec 22 19:35 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 16 Dec 22 19:35 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 33 Dec 22 19:35 /dev/snd/timer


!!Aplay/Arecord output
!!------------

APLAY

aplay: device_list:207: no soundcards found...

ARECORD

arecord: device_list:207: no soundcards found...

!!Amixer output
!!-------------

!!-------Mixer controls for card 0 [IXP]

Invalid card number.
Usage: amixer <options> [command]

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially

Available commands:
  scontrols       show all mixer simple controls
  scontents	  show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control
Invalid card number.
Usage: amixer <options> [command]

Available options:
  -h,--help       this help
  -c,--card N     select the card
  -D,--device N   select the device, default 'default'
  -d,--debug      debug mode
  -n,--nocheck    do not perform range checking
  -v,--version    print version of this program
  -q,--quiet      be quiet
  -i,--inactive   show also inactive controls
  -a,--abstract L select abstraction level (none or basic)
  -s,--stdin      Read and execute commands from stdin sequentially

Available commands:
  scontrols       show all mixer simple controls
  scontents	  show contents of all mixer simple controls (default command)
  sset sID P      set contents for one mixer simple control
  sget sID        get contents for one mixer simple control
  controls        show all controls for given card
  contents        show contents of all controls for given card
  cset cID P      set control contents for one control
  cget cID        get control contents for one control


!!Alsactl output
!!-------------

--startcollapse--
--endcollapse--


!!All Loaded Modules
!!------------------

Module