!!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Sun Nov 7 09:09:05 UTC 2010 !!Linux Distribution !!------------------ Gentoo Base System release 2.0.1-r1 !!DMI Information !!--------------- Manufacturer: FUJITSU SIEMENS Product Name: Amilo A1640 !!Kernel Information !!------------------ Kernel release: 2.6.36-gentoo Operating System: GNU/Linux Architecture: i686 Processor: Mobile AMD Sempron(tm) Processor 3000 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.23 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [SI7012 ]: ICH - SiS SI7012 SiS SI7012 with VIA1612A at irq 18 1 [Modem ]: ICH-MODEM - SiS SI7013 Modem SiS SI7013 Modem at irq 18 !!PCI Soundcards installed in the system !!-------------------------------------- 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:02.7 0401: 1039:7012 (rev a0) Subsystem: 1734:106c !!Loaded sound module options !!-------------------------- !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: VIA Technologies VIA1612A PCI Subsys Vendor: 0x1734 PCI Subsys Device: 0x106c Flags: 0 Capabilities : -headphone out- DAC resolution : 18-bit ADC resolution : 18-bit 3D enhancement : IC Ensemble/KS Waves Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=0 AMAP DSA=0 SPDIF VRA Extended status : SPCV SPDIF=3/4 VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Copyright Category=0x22 Generation=1 Rate=48kHz 0:00 = 6d50 0:02 = 9f1f 0:04 = 9f1f 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 9f1f 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0205 0:2a = 0401 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 2a20 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 8221 0:5c = 0058 0:5e = 0000 0:60 = bfff 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 0000 0:76 = 0000 0:78 = 0000 0:7a = 0000 0:7c = 5649 0:7e = 4161 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 7 Nov 6 15:02 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 10 Nov 6 15:02 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 6 Nov 6 15:02 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 5 Nov 6 15:02 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 4 Nov 6 15:02 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 9 Nov 6 15:02 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 8 Nov 6 15:02 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 3 Nov 6 15:02 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Nov 6 15:02 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Nov 6 15:02 . drwxr-xr-x 3 root root 240 Nov 6 15:02 .. lrwxrwxrwx 1 root root 12 Nov 6 15:02 pci-0000:00:02.6 -> ../controlC1 lrwxrwxrwx 1 root root 12 Nov 6 15:02 pci-0000:00:02.7 -> ../controlC0 !!Aplay/Arecord output !!------------ APLAY aplay: device_list:235: no soundcards found... ARECORD arecord: device_list:235: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [SI7012] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [Modem] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ !!ALSA/HDA dmesg !!------------------ [ 5.239683] Intel ICH Modem 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.250882] ALSA device list: [ 5.257505] #0: SiS SI7012 with VIA1612A at irq 18