!!################################ !!ALSA Information Script v 0.4.65 !!################################ !!Script ran on: Sun Jul 26 13:18:51 UTC 2020 !!Linux Distribution !!------------------ ID_LIKE=debian !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: Board Vendor: Board Name: !!ACPI Device Status Information !!--------------- !!Kernel Information !!------------------ Kernel release: 5.4.51-v7l Operating System: GNU/Linux Architecture: armv7l Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k5.4.51-v7l Library version: 1.1.8 Utilities version: 1.1.8 !!Loaded ALSA modules !!------------------- snd_bcm2835 snd_usb_audio !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [Headphones ]: bcm2835_headphonbcm2835 Headphones - bcm2835 Headphones bcm2835 Headphones 1 [CODEC ]: USB-Audio - USB Audio CODEC Burr-Brown from TI USB Audio CODEC at usb-0000:01:00.0-1.1, full speed !!PCI Soundcards installed in the system !!-------------------------------------- !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 snd_bcm2835: enable_compat_alsa=0 snd_bcm2835: enable_hdmi=1 snd_bcm2835: enable_headphones=1 !!Loaded sound module options !!--------------------------- !!Module: snd_bcm2835 enable_compat_alsa : N enable_hdmi : Y enable_headphones : Y force_bulk : N !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null) use_vmalloc : Y vid : -1,-1,-1,-1,-1,-1,-1,-1 !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x08bb2902, ctrlif=0, ctlerr=0 Card: Burr-Brown from TI USB Audio CODEC at usb-0000:01:00.0-1.1, full speed Unit: 3 Control: name="PCM Playback Volume", index=0 Info: id=3, control=2, cmask=0x3, channels=2, type="S16" Volume: min=-32768, max=0, dBmin=-12800, dBmax=0 Unit: 3 Control: name="PCM Playback Switch", index=0 Info: id=3, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Jul 26 14:14 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 Jul 26 14:14 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 16 Jul 26 14:14 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 56 Jul 26 14:14 /dev/snd/pcmC1D0c crw-rw---- 1 root audio 116, 48 Jul 26 14:14 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 1 Jul 26 14:14 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Jul 26 14:14 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Jul 26 14:14 . drwxr-xr-x 4 root root 220 Jul 26 14:14 .. lrwxrwxrwx 1 root root 12 Jul 26 14:14 usb-Burr-Brown_from_TI_USB_Audio_CODEC-00 -> ../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 80 Jul 26 14:14 . drwxr-xr-x 4 root root 220 Jul 26 14:14 .. lrwxrwxrwx 1 root root 12 Jul 26 14:14 platform-bcm2835_audio -> ../controlC0 lrwxrwxrwx 1 root root 12 Jul 26 14:14 platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.1:1.0 -> ../controlC1 !!Aplay/Arecord output !!-------------------- APLAY aplay: device_list:272: no soundcards found... ARECORD arecord: device_list:272: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card Headphones Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card CODEC Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially -R,--raw-volume Use the raw value (default) -M,--mapped-volume Use the mapped volume Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!-------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ 8021q bcm2835_codec bcm2835_isp bcm2835_mmal_vchiq bcm2835_v4l2 bluetooth bnep brcmfmac brcmutil btbcm cec cfg80211 cmac drm drm_kms_helper drm_panel_orientation_quirks ecc ecdh_generic evdev fb_sys_fops garp gpu_sched hci_uart i2c_dev ip_tables ipv6 libsha256 llc mc nf_defrag_ipv6 raspberrypi_hwmon rfcomm rfkill rpivid_mem sha256_generic snd snd_bcm2835 snd_compress snd_hwdep snd_pcm snd_pcm_dmaengine snd_rawmidi snd_seq_device snd_soc_core snd_timer snd_usb_audio snd_usbmidi_lib stp syscopyarea sysfillrect sysimgblt uio uio_pdrv_genirq v3d v4l2_mem2mem vc4 vc_sm_cma videobuf2_common videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_vmalloc videodev x_tables !!ALSA/HDA dmesg !!-------------- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502528 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 smsc95xx.macaddr=DC:A6:32:B3:C6:80 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=48a2ff6f-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) -- [ 4.019524] [vc_sm_connected_init]: start [ 4.020521] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 4.021298] mc: Linux media interface: v0.10 -- [ 4.388578] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.399300] [drm] No displays found. Consider forcing hotplug if HDMI is attached [ 4.399420] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) -- [ 4.603529] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.txt failed with error -2 [ 4.718058] usbcore: registered new interface driver snd-usb-audio [ 4.835174] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 !!Packages installed !!-------------------- ii alsa-utils 1.1.8-2 armhf Utilities for configuring and using ALSA