!!################################ !!ALSA Information Script v 0.4.58 !!################################ !!Script ran on: Mon Aug 31 14:51:37 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04" !!DMI Information !!--------------- Manufacturer: Hewlett-Packard Product Name: HP Pavilion dv6 Notebook PC !!Kernel Information !!------------------ Kernel release: 2.6.28-15-generic Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18rc3 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel !!Sound Servers on this system !!---------------------------- ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [SB ]: HDA-Intel - HDA ATI SB HDA ATI SB at 0xd2400000 irq 16 1 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xd2310000 irq 2298 !!PCI Soundcards installed in the system !!-------------------------------------- 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:14.2 0403: 1002:4383 Subsystem: 103c:3059 -- 01:05.1 0403: 1002:960f Subsystem: 103c:3059 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 snd-hda-intel: model=hp-m4 snd-hda-intel: enable_msi=1 snd-hda-intel: model=laptop enable=1 index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 1 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : hp-m4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!Module: snd_hda_intel bdl_pos_adj : 32,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 1 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : hp-m4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: IDT 92HD75B3X5 Address: 0 Vendor Id: 0x111d7603 Subsystem Id: 0x103c3059 Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 GPIO: io=8, o=0, i=0, unsolicited=1, wake=1 IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x40f100f0: [N/A] Other at Ext N/A Conn = 1/8, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Connection: 3 0x10 0x11* 0x17 Node 0x0b [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00001724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x02a11020: [Jack] Mic at Ext Front Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x0c [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00001724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x40f000f1: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x1 Pin-ctls: 0x00: VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 3 0x10 0x11 0x17* Node 0x0e [Pin Complex] wcaps 0x400081: Stereo Pincap 0x00001724: IN Detect Vref caps: HIZ 50 GRD 80 Pin Default 0x01813040: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x02014040: [Jack] Line Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 3 0x10 0x11 0x17* Node 0x10 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x11 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Delay: 13 samples Node 0x12 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D3, actual=D3 Delay: 13 samples Connection: 1 0x1c Processing caps: benign=0, ncoeff=0 Node 0x13 [Audio Input] wcaps 0x1d0541: Stereo Converter: stream=0, channel=0 SDI-Select: 0 Power: setting=D3, actual=D3 Delay: 13 samples Connection: 1 0x1d Processing caps: benign=0, ncoeff=0 Node 0x14 [Pin Complex] wcaps 0x400100: Mono Pincap 0x00000030: IN OUT Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Connection: 1 0x16 Node 0x15 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x10 0x11 0x17* Node 0x16 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x15 Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] Connection: 5 0x10 0x11 0x14 0x1a 0x1b Node 0x18 [Pin Complex] wcaps 0x40000b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x90a60350: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x5, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x19 [Pin Complex] wcaps 0x40000b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f000f4: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x4 Pin-ctls: 0x00: Node 0x1a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 3 0x0b* 0x0c 0x0e Node 0x1b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 3 0x0b* 0x0c 0x0e Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x00 0x00] Connection: 4 0x1a* 0x17 0x18 0x19 Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 4 0x1b* 0x17 0x18 0x19 Node 0x1e [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x024511a0: [Jack] SPDIF Out at Ext Front Conn = Optical, Color = Black DefAssociation = 0xa, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x24 Node 0x1f [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00010010: OUT EAPD EAPD 0x0: Pin Default 0x40f000f5: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x5 Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 2 0x24* 0x25 Node 0x20 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x00: Connection: 1 0x25 Node 0x21 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x22 [Audio Output] wcaps 0x40211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Delay: 4 samples Node 0x23 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x24 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x21* 0x1c 0x1d Node 0x25 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x22* 0x1c 0x1d Node 0x26 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1 Amp-Out vals: [0x00] Node 0x27 [Volume Knob Widget] wcaps 0x600000: Mono Volume-Knob: delta=1, steps=127, direct=0, val=127 Connection: 2 0x10* 0x11 Codec: LSI ID 1040 Address: 1 Vendor Id: 0x11c11040 Subsystem Id: 0x103c137e Revision Id: 0x100200 Modem Function Group: 0x1 Codec: ATI ATI RS690/780 HDMI Address: 0 Vendor Id: 0x1002791a Subsystem Id: 0x791a00 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x40]: 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x02 --endcollapse-- !!ALSA Device nodes !!----------------- !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # ALSA library configuration file # Include settings that are under the control of asoundconf(1). # (To disable these settings, comment out this line.) !!asoundconf-generated config file # ALSA library configuration file managed by asoundconf(1). # # MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN! # # Manual changes to the ALSA library configuration should be implemented # by editing the ~/.asoundrc file, not by editing this file. !defaults.pcm.card SB defaults.ctl.card SB defaults.pcm.device 0 defaults.pcm.subdevice -1 defaults.pcm.nonblock 1 defaults.pcm.ipc_key 5678293 defaults.pcm.ipc_gid audio defaults.pcm.ipc_perm 0660 defaults.pcm.dmix.max_periods 0 defaults.pcm.dmix.rate 48000 defaults.pcm.dmix.format "unchanged" defaults.pcm.dmix.card defaults.pcm.card defaults.pcm.dmix.device defaults.pcm.device defaults.pcm.dsnoop.card defaults.pcm.card defaults.pcm.dsnoop.device defaults.pcm.device defaults.pcm.front.card defaults.pcm.card defaults.pcm.front.device defaults.pcm.device defaults.pcm.rear.card defaults.pcm.card defaults.pcm.rear.device defaults.pcm.device defaults.pcm.center_lfe.card defaults.pcm.card defaults.pcm.center_lfe.device defaults.pcm.device defaults.pcm.side.card defaults.pcm.card defaults.pcm.side.device defaults.pcm.device defaults.pcm.surround40.card defaults.pcm.card defaults.pcm.surround40.device defaults.pcm.device defaults.pcm.surround41.card defaults.pcm.card defaults.pcm.surround41.device defaults.pcm.device defaults.pcm.surround50.card defaults.pcm.card defaults.pcm.surround50.device defaults.pcm.device defaults.pcm.surround51.card defaults.pcm.card defaults.pcm.surround51.device defaults.pcm.device defaults.pcm.surround71.card defaults.pcm.card defaults.pcm.surround71.device defaults.pcm.device defaults.pcm.iec958.card defaults.pcm.card defaults.pcm.iec958.device defaults.pcm.device defaults.pcm.modem.card defaults.pcm.card defaults.pcm.modem.device defaults.pcm.device defaults.pcm.file_format "raw" defaults.pcm.file_truncate true defaults.rawmidi.card 0 defaults.rawmidi.device 0 defaults.rawmidi.subdevice -1 defaults.hwdep.card 0 defaults.hwdep.device 0 defaults.timer.class 2 defaults.timer.sclass 0 defaults.timer.card 0 defaults.timer.device 0 defaults.timer.subdevice 0 defaults.namehint.showall off defaults.namehint.basic on defaults.namehint.extended off !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [SB] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [HDMI] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module binfmt_misc ppdev bridge stp bnep input_polldev lp parport arc4 ecb snd_hda_intel snd_pcm ath9k snd_timer fglrx mac80211 agpgart leds_hp_disk snd uvcvideo cfg80211 joydev video psmouse soundcore compat_ioctl32 i2c_piix4 shpchp output pcspkr lis3lv02d led_class serio_raw snd_page_alloc videodev v4l1_compat usbhid r8169 mii fbcon tileblit font bitblit softcursor !!ALSA/HDA dmesg !!------------------ [ 13.047137] ath9k 0000:08:00.0: setting latency timer to 64 [ 13.220339] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.220453] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 13.341340] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.341390] HDA Intel 0000:01:05.1: irq 2298 for MSI/MSI-X [ 13.341418] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 13.360053] APIC error on CPU1: 00(08) -- [ 13.864680] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 14.360542] hda_intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 15.364550] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 15.603691] lp: driver loaded but no devices found -- [ 38.920515] wlan0: no IPv6 routers present [ 45.252018] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x021f000a [ 46.258019] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x021f000a [ 46.283094] CPU0 attaching NULL sched-domain.