!!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Sun Jun 4 02:07:17 UTC 2017 !!Linux Distribution !!------------------ ID_LIKE=debian !!DMI Information !!--------------- Manufacturer: Product Name: Product Version: Firmware Version: Board Vendor: Board Name: !!ACPI Device Status Information !!--------------- !!Kernel Information !!------------------ Kernel release: 4.9.30-v7 Operating System: GNU/Linux Architecture: armv7l Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.9.30-v7 Library version: 1.0.28 Utilities version: 1.0.28 !!Loaded ALSA modules !!------------------- snd_bcm2835 snd_usb_audio snd_aloop !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [ALSA ]: bcm2835 - bcm2835 ALSA bcm2835 ALSA 1 [AUDIO ]: USB-Audio - USB AUDIO USB AUDIO at usb-3f980000.usb-1.5, full speed 2 [Loopback ]: Loopback - Loopback Loopback 1 !!PCI Soundcards installed in the system !!-------------------------------------- !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!Module: snd_bcm2835 force_bulk : N !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null) vid : -1,-1,-1,-1,-1,-1,-1,-1 !!Module: snd_aloop enable : Y,N,N,N,N,N,N,N id : (null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1 pcm_notify : 0,0,0,0,0,0,0,0 pcm_substreams : 8,8,8,8,8,8,8,8 !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x11301620, ctrlif=0, ctlerr=0 Card: USB AUDIO at usb-3f980000.usb-1.5, full speed Unit: 2 Control: name="PCM Playback Volume", index=0 Info: id=2, control=2, cmask=0x3, channels=2, type="S16" Volume: min=0, max=17152, dBmin=0, dBmax=6700 Unit: 2 Control: name="PCM Playback Switch", index=0 Info: id=2, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 0 Jun 2 17:17 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 32 Jun 2 17:17 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 64 Jun 3 19:54 /dev/snd/controlC2 crw-rw---- 1 root audio 116, 16 Jun 3 21:06 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 17 Jun 2 17:17 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 48 Jun 2 17:17 /dev/snd/pcmC1D0p crw-rw---- 1 root audio 116, 88 Jun 3 19:54 /dev/snd/pcmC2D0c crw-rw---- 1 root audio 116, 80 Jun 3 19:54 /dev/snd/pcmC2D0p crw-rw---- 1 root audio 116, 89 Jun 3 19:54 /dev/snd/pcmC2D1c crw-rw---- 1 root audio 116, 81 Jun 3 19:54 /dev/snd/pcmC2D1p crw-rw---- 1 root audio 116, 1 Jun 2 17:17 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Jun 2 17:17 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Jun 2 17:17 . drwxr-xr-x 4 root root 320 Jun 3 19:54 .. lrwxrwxrwx 1 root root 12 Jun 2 17:17 usb-1130_USB_AUDIO-00 -> ../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 100 Jun 3 19:54 . drwxr-xr-x 4 root root 320 Jun 3 19:54 .. lrwxrwxrwx 1 root root 12 Jun 2 17:17 platform-3f980000.usb-usb-0:1.5:1.0 -> ../controlC1 lrwxrwxrwx 1 root root 12 Jun 3 19:54 platform-snd_aloop.0 -> ../controlC2 lrwxrwxrwx 1 root root 12 Jun 2 17:17 platform-soc:audio -> ../controlC0 !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) defaults.pcm.!card AUDIO defaults.ctl.!card AUDIO defaults.pcm.dmix.!format S16_LE pcm.!default { type asym playback.pcm "plug:dmix" capture.pcm "plug:\"dsnoop:Loopback,1\"" } !!System wide config file (/etc/asound.conf) defaults.pcm.!card AUDIO defaults.ctl.!card AUDIO !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: AUDIO [USB AUDIO], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 ARECORD **** List of CAPTURE Hardware Devices **** card 2: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM] Subdevices: 8/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 card 2: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM] Subdevices: 7/8 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 Subdevice #7: subdevice #7 !!Amixer output !!------------- !!-------Mixer controls for card 0 [ALSA] Card hw:0 'ALSA'/'bcm2835 ALSA' Mixer name : 'Broadcom Mixer' Components : '' Controls : 6 Simple ctrls : 1 Simple mixer control 'PCM',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback -10239 - 400 Mono: Playback -2000 [77%] [-20.00dB] [on] !!-------Mixer controls for card 1 [AUDIO] Card hw:1 'AUDIO'/'USB AUDIO at usb-3f980000.usb-1.5, full speed' Mixer name : 'USB Mixer' Components : 'USB1130:1620' Controls : 3 Simple ctrls : 1 Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 17152 Mono: Front Left: Playback 4079 [24%] [15.93dB] [on] Front Right: Playback 3142 [18%] [12.27dB] [on] !!-------Mixer controls for card 2 [Loopback] Card hw:2 'Loopback'/'Loopback 1' Mixer name : 'Loopback Mixer' Components : '' Controls : 96 Simple ctrls : 0 !!Alsactl output !!-------------- --startcollapse-- state.ALSA { control.1 { iface MIXER name 'PCM Playback Volume' value -2000 comment { access 'read write' type INTEGER count 1 range '-10239 - 400' dbmin -9999999 dbmax 400 dbvalue.0 -2000 } } control.2 { iface MIXER name 'PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'PCM Playback Route' value 0 comment { access 'read write' type INTEGER count 1 range '0 - 2' } } control.4 { iface PCM name 'IEC958 Playback Default' value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface PCM name 'IEC958 Playback Con Mask' value '0200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.6 { iface PCM name 'IEC958 Playback PCM Stream' value '0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write inactive' type IEC958 count 1 } } } state.AUDIO { control.1 { iface PCM name 'Playback Channel Map' value.0 3 value.1 4 comment { access read type INTEGER count 2 range '0 - 36' } } control.2 { iface MIXER name 'PCM Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'PCM Playback Volume' value.0 4079 value.1 3142 comment { access 'read write' type INTEGER count 2 range '0 - 17152' dbmin 0 dbmax 6700 dbvalue.0 1593 dbvalue.1 1227 } } } state.Loopback { control.1 { iface PCM name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.2 { iface PCM name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface PCM name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.4 { iface PCM name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.5 { iface PCM name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.6 { iface PCM name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.7 { iface PCM subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.8 { iface PCM subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.9 { iface PCM subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.10 { iface PCM subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.11 { iface PCM subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.12 { iface PCM subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.13 { iface PCM subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.14 { iface PCM subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.15 { iface PCM subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.16 { iface PCM subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.17 { iface PCM subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.18 { iface PCM subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.19 { iface PCM subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.20 { iface PCM subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.21 { iface PCM subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.22 { iface PCM subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.23 { iface PCM subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.24 { iface PCM subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.25 { iface PCM subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.26 { iface PCM subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.27 { iface PCM subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.28 { iface PCM subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.29 { iface PCM subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.30 { iface PCM subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.31 { iface PCM subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.32 { iface PCM subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.33 { iface PCM subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.34 { iface PCM subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.35 { iface PCM subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.36 { iface PCM subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.37 { iface PCM subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.38 { iface PCM subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.39 { iface PCM subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.40 { iface PCM subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.41 { iface PCM subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.42 { iface PCM subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.43 { iface PCM subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.44 { iface PCM subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.45 { iface PCM subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.46 { iface PCM subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.47 { iface PCM subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.48 { iface PCM subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.49 { iface PCM device 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.50 { iface PCM device 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.51 { iface PCM device 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.52 { iface PCM device 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.53 { iface PCM device 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.54 { iface PCM device 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.55 { iface PCM device 1 subdevice 1 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.56 { iface PCM device 1 subdevice 1 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.57 { iface PCM device 1 subdevice 1 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.58 { iface PCM device 1 subdevice 1 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.59 { iface PCM device 1 subdevice 1 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.60 { iface PCM device 1 subdevice 1 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.61 { iface PCM device 1 subdevice 2 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.62 { iface PCM device 1 subdevice 2 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.63 { iface PCM device 1 subdevice 2 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.64 { iface PCM device 1 subdevice 2 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.65 { iface PCM device 1 subdevice 2 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.66 { iface PCM device 1 subdevice 2 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.67 { iface PCM device 1 subdevice 3 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.68 { iface PCM device 1 subdevice 3 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.69 { iface PCM device 1 subdevice 3 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.70 { iface PCM device 1 subdevice 3 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.71 { iface PCM device 1 subdevice 3 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.72 { iface PCM device 1 subdevice 3 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.73 { iface PCM device 1 subdevice 4 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.74 { iface PCM device 1 subdevice 4 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.75 { iface PCM device 1 subdevice 4 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.76 { iface PCM device 1 subdevice 4 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.77 { iface PCM device 1 subdevice 4 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.78 { iface PCM device 1 subdevice 4 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.79 { iface PCM device 1 subdevice 5 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.80 { iface PCM device 1 subdevice 5 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.81 { iface PCM device 1 subdevice 5 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.82 { iface PCM device 1 subdevice 5 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.83 { iface PCM device 1 subdevice 5 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.84 { iface PCM device 1 subdevice 5 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.85 { iface PCM device 1 subdevice 6 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.86 { iface PCM device 1 subdevice 6 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.87 { iface PCM device 1 subdevice 6 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.88 { iface PCM device 1 subdevice 6 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.89 { iface PCM device 1 subdevice 6 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.90 { iface PCM device 1 subdevice 6 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } control.91 { iface PCM device 1 subdevice 7 name 'PCM Rate Shift 100000' value 100000 comment { access 'read write' type INTEGER count 1 range '80000 - 120000 (step 1)' } } control.92 { iface PCM device 1 subdevice 7 name 'PCM Notify' value false comment { access 'read write' type BOOLEAN count 1 } } control.93 { iface PCM device 1 subdevice 7 name 'PCM Slave Active' value false comment { access read type BOOLEAN count 1 } } control.94 { iface PCM device 1 subdevice 7 name 'PCM Slave Format' value 2 comment { access read type INTEGER count 1 range '0 - 52 (step 1)' } } control.95 { iface PCM device 1 subdevice 7 name 'PCM Slave Rate' value 48000 comment { access read type INTEGER count 1 range '0 - 192000 (step 1)' } } control.96 { iface PCM device 1 subdevice 7 name 'PCM Slave Channels' value 2 comment { access read type INTEGER count 1 range '1 - 1024 (step 1)' } } } --endcollapse-- !!All Loaded Modules !!------------------ Module snd_aloop bnep hci_uart btbcm bluetooth ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables binfmt_misc brcmfmac brcmutil cfg80211 snd_usb_audio rfkill snd_hwdep snd_usbmidi_lib snd_rawmidi joydev snd_seq_device snd_bcm2835 snd_pcm snd_timer snd bcm2835_gpiomem evdev uio_pdrv_genirq fixed uio i2c_dev fuse ipv6 !!ALSA/HDA dmesg !!-------------- [ 3.609371] usb 1-1.5: [2] FU [PCM Playback Volume] ch = 2, val = 0/17152/1 [ 3.610246] usbcore: registered new interface driver snd-usb-audio [ 3.725570] usbcore: registered new interface driver brcmfmac