!!################################ !!ALSA Information Script v 0.4.53 !!################################ !!Script ran on: Wed Jan 28 22:00:41 UTC 2009 !!Linux Distribution !!------------------ Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) Fedora release 10 (Cambridge) !!Kernel Information !!------------------ Kernel release: 2.6.27.12-170.2.5.fc10.i686 Operating System: GNU/Linux Architecture: i686 Processor: i686 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: 1.0.19 Utilities version: 1.0.19 !!Loaded ALSA modules !!------------------- snd_intel8x0 snd_intel8x0m !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - No aRts: Installed - Yes (/usr/bin/artsd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with AD1981B at irq 10 1 [Modem ]: ICH-MODEM - Intel 82801DB-ICH4 Modem Intel 82801DB-ICH4 Modem at irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:1f.5 0401: 8086:24c5 (rev 01) Subsystem: 0e11:0860 !!Loaded sound module options !!-------------------------- !!Module: snd_intel8x0 ac97_clock : 0 ac97_quirk : buggy_irq : N buggy_semaphore : N enable : N id : index : -1 joystick : 0 spdif_aclink : 0 xbox : N !!Module: snd_intel8x0m ac97_clock : 0 enable : N id : index : -2 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Analog Devices AD1981B PCI Subsys Vendor: 0x0e11 PCI Subsys Device: 0x0860 Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA Extended status : SPCV SPDIF=10/11 VRA PCM front DAC : 44100Hz PCM ADC : 44100Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz AD18XX configuration Unchained : 0x1000,0x0000,0x0000 Chained : 0x0000,0x0000,0x0000 0:00 = 0090 0:02 = 0000 0:04 = 0e0e 0:06 = 000e 0:08 = 0000 0:0a = 0000 0:0c = 801f 0:0e = 801f 0:10 = 9f9f 0:12 = 1616 0:14 = 0000 0:16 = 9f9f 0:18 = 1616 0:1a = 0000 0:1c = 0d0d 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0605 0:2a = 0431 0:2c = ac44 0:2e = 0000 0:30 = 0000 0:32 = ac44 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 4000 0:5e = 0000 0:60 = 8080 0:62 = 0000 0:64 = 8000 0:66 = 0000 0:68 = 0000 0:6a = 0000 0:6c = 0000 0:6e = 0000 0:70 = 0000 0:72 = 0000 0:74 = 1001 0:76 = 2010 0:78 = 0000 0:7a = 0000 0:7c = 4144 0:7e = 5374 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 13 Jan 28 21:36 /dev/snd/controlC0 crw-rw---- 1 root root 116, 6 Jan 28 21:36 /dev/snd/controlC1 crw-rw---- 1 root root 116, 12 Jan 28 21:44 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 11 Jan 28 21:44 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 10 Jan 28 21:36 /dev/snd/pcmC0D1c crw-rw---- 1 root root 116, 9 Jan 28 21:36 /dev/snd/pcmC0D2c crw-rw---- 1 root root 116, 8 Jan 28 21:36 /dev/snd/pcmC0D3c crw-rw---- 1 root root 116, 7 Jan 28 21:36 /dev/snd/pcmC0D4p crw-rw---- 1 root root 116, 5 Jan 28 21:36 /dev/snd/pcmC1D0c crw-rw---- 1 root root 116, 4 Jan 28 21:36 /dev/snd/pcmC1D0p crw-rw---- 1 root root 116, 3 Jan 28 21:36 /dev/snd/seq crw-rw---- 1 root root 116, 2 Jan 28 21:36 /dev/snd/timer !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # PulseAudio plugin configuration # $Id: pulse-default.conf,v 1.3 2008/03/09 15:50:49 lkundrak Exp $ # Let's create a virtual device "pulse" for mixer and PCM pcm.pulse { type pulse hint { description "PulseAudio Sound Server" } } ctl.pulse { type pulse hint { description "PulseAudio Sound Server" } } # Let's make it the default! pcm.!default { type pulse hint { description "Default" } } ctl.!default { type pulse hint { description "Default" } } !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [I82801DBICH4] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [Modem] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module arc4 ecb crypto_blkcipher ieee80211_crypt_wep rfcomm sco bridge stp bnep l2cap sunrpc ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq vfat fat dm_multipath uinput snd_intel8x0 snd_intel8x0m snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm video iTCO_wdt iTCO_vendor_support firewire_ohci btusb snd_timer ppdev wbsd 8139cp i2c_i801 mmc_core snd firewire_core serio_raw output joydev pcspkr soundcore snd_page_alloc 8139too yenta_socket rsrc_nonstatic smsc_ircc2 irda ipw2200 bluetooth ieee80211 ieee80211_crypt crc_itu_t parport_pc mii crc_ccitt parport ata_generic pata_acpi radeon drm i2c_algo_bit i2c_core