!!################################ !!ALSA Information Script v 0.4.51 !!################################ !!Script ran on: Tue Sep 16 18:41:55 CEST 2008 !!Linux Distribution !!------------------ Fedora release 9.90.1 (Rawhide) Fedora release 9.90.1 (Rawhide) Fedora release 9.90.1 (Rawhide) Fedora release 9.90.1 (Rawhide) !!Kernel Information !!------------------ Kernel release: 2.6.27-0.323.rc6.fc10.i686 Operating System: GNU/Linux Architecture: i686 Processor: athlon SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.17 Library version: 1.0.18rc3 Utilities version: 1.0.18rc3 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_mpu401 !!Soundcards recognised by ALSA !!----------------------------- 0 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xfe024000 irq 22 1 [UART ]: MPU-401 UART - MPU-401 UART MPU-401 UART at 0x330, irq 10 !!PCI Soundcards installed in the system !!-------------------------------------- 00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:10.1 0403: 10de:026c (rev a2) Subsystem: 1043:81cb !!Modprobe options (Sound related) !!-------------------------------- snd-ens1371: index=0 snd-card-1: index=1 snd-mpu401: index=1 snd-card-0: index=0 snd-hda-intel: index=0 !!Loaded sound module options !!-------------------------- !!Module: snd_hda_intel bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : 0 id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 model : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, position_fix : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 single_cmd : N !!Module: snd_mpu401 enable : Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N id : ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, index : 1,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2,-2 irq : 10,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535,65535 pnp : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y port : 816,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 uart_enter : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Analog Devices AD1986A Address: 0 Vendor Id: 0x11d41986 Subsystem Id: 0x104381b3 Revision Id: 0x100500 No Modem Function Group found Default PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 GPIO: io=0, o=1, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x60]: 44100 48000 bits [0x2]: 16 formats [0x5]: PCM AC3 Delay: 3 samples Connection: 2 0x01* 0x06 Node 0x03 [Audio Output] wcaps 0x44d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Processing caps: benign=1, ncoeff=70 Node 0x04 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x05 [Audio Output] wcaps 0x40d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Converter: stream=0, channel=0 Power: setting=D0, actual=D0 Node 0x06 [Audio Input] wcaps 0x100511: Stereo Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x7f]: 8000 11025 16000 22050 32000 44100 48000 bits [0x6]: 16 20 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x07 [Audio Mixer] wcaps 0x200101: Stereo Connection: 8 0x03 0x09 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x08 [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x07 Node 0x09 [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x80] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Connection: 2 0x04 0x05 Node 0x0a [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x07* 0x04 0x05 Node 0x0b [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x07* 0x04 Node 0x0c [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x04* 0x07 Node 0x0d [Audio Selector] wcaps 0x300101: Stereo Connection: 2 0x05* 0x08 Node 0x0e [Audio Selector] wcaps 0x300100: Mono Connection: 2 0x08* 0x11 Node 0x0f [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 8 0x1f 0x20 0x1d 0x1d 0x27* 0x28 0x29 0x2a Node 0x10 [Audio Selector] wcaps 0x300101: Stereo Connection: 3 0x20 0x1c* 0x1f Node 0x11 [Audio Selector] wcaps 0x300941: Stereo R/L Connection: 2 0x0f* 0x2b Processing caps: benign=1, ncoeff=0 Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 8 0x11* 0x22 0x00 0x21 0x10 0x07 0x08 0x23 Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x11 Node 0x14 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Connection: 1 0x23 Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x22 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x21 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Connection: 1 0x10 Node 0x18 [Audio Selector] wcaps 0x30010c: Mono Amp-Out Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1 Amp-Out vals: [0x8f] Connection: 2 0x19* 0x24 Node 0x19 [Beep Generator Widget] wcaps 0x700000: Mono Node 0x1a [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x081f: OUT HP Detect Trigger ImpSense Pin Default 0x02214021: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x2, Sequence = 0x1 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 1 0x0a Node 0x1b [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Pincap 0x081001f: OUT HP EAPD Detect Trigger ImpSense EAPD 0x2: EAPD Pin Default 0x01014011: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0x1 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0b Node 0x1c [Pin Complex] wcaps 0x400185: Stereo Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x9f] Pincap 0x0837: IN OUT Detect Trigger ImpSense Pin Default 0x01013012: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x1, Sequence = 0x2 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 1 0x0c Node 0x1d [Pin Complex] wcaps 0x400985: Stereo Amp-Out R/L Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x9f 0x80] Pincap 0x081737: IN OUT Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x01019015: [Jack] Line Out at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x1, Sequence = 0x5 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 1 0x0d Node 0x1e [Pin Complex] wcaps 0x400104: Mono Amp-Out Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x501700f0: [N/A] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x1f [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Node 0x20 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x081727: IN Detect Trigger ImpSense Vref caps: HIZ 50 GRD 80 Pin Default 0x018130f0: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Node 0x21 [Pin Complex] wcaps 0x400081: Stereo Pincap 0x0827: IN Detect Trigger ImpSense Pin Default 0x509700f0: [N/A] Aux at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x22 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x993310f0: [Fixed] CD at Int ATAPI Conn = ATAPI, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x23 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x50b700f0: [N/A] Telephony at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x24 [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x90f700f0: [Fixed] Other at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x20: IN Node 0x25 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x014510f0: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Black DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x26 [Power Widget] wcaps 0x500500: Mono Power: setting=D0, actual=D0 Connection: 8 0x07* 0x08 0x13 0x14 0x15 0x16 0x17 0x18 Node 0x27 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x1d Node 0x28 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1f 0x20 Node 0x29 [Audio Mixer] wcaps 0x200101: Stereo Connection: 2 0x1d 0x20 Node 0x2a [Audio Mixer] wcaps 0x200101: Stereo Connection: 3 0x1f 0x1d 0x20 Node 0x2b [Audio Mixer] wcaps 0x200100: Mono Connection: 1 0x0f --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root root 116, 10 2008-09-16 18:21 /dev/snd/controlC0 crw-rw---- 1 root root 116, 4 2008-09-16 18:21 /dev/snd/controlC1 crw-rw---- 1 root root 116, 9 2008-09-16 18:21 /dev/snd/hwC0D0 crw-rw---- 1 root root 116, 3 2008-09-16 18:21 /dev/snd/midiC1D0 crw-rw---- 1 root root 116, 8 2008-09-16 18:21 /dev/snd/pcmC0D0c crw-rw---- 1 root root 116, 7 2008-09-16 18:21 /dev/snd/pcmC0D0p crw-rw---- 1 root root 116, 6 2008-09-16 18:21 /dev/snd/pcmC0D1p crw-rw---- 1 root root 116, 5 2008-09-16 18:21 /dev/snd/seq crw-rw---- 1 root root 116, 2 2008-09-16 18:21 /dev/snd/timer !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # # Place your global alsa-lib configuration here... # @hooks [ { func load files [ "/etc/alsa/pulse-default.conf" ] errors false } ] !!Aplay/Arecord output !!------------ APLAY aplay: device_list:215: no soundcards found... ARECORD arecord: device_list:215: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [NVidia] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!-------Mixer controls for card 1 [UART] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module nvidia fuse rfkill_input nf_conntrack_netbios_ns nf_conntrack_ipv4 xt_state nf_conntrack ipt_REJECT iptable_filter ip_tables xt_tcpudp ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 dm_mirror dm_log dm_multipath dm_mod kvm_amd kvm snd_hda_intel snd_seq_dummy snd_seq_oss snd_seq_midi_event arc4 ecb snd_seq snd_pcm_oss crypto_blkcipher snd_mixer_oss snd_pcm b43 rfkill mac80211 cfg80211 snd_mpu401 snd_timer snd_mpu401_uart ppdev snd_page_alloc snd_rawmidi input_polldev parport_pc snd_seq_device snd_hwdep snd firewire_ohci ssb usblp ns558 gameport k8temp firewire_core crc_itu_t hwmon pcspkr sr_mod joydev serio_raw forcedeth parport i2c_nforce2 i2c_core soundcore cdrom sata_nv pata_amd ata_generic pata_acpi ext3 jbd mbcache