!!################################ !!ALSA Information Script v 0.4.59 !!################################ !!Script ran on: Fri Oct 22 21:52:33 UTC 2010 !!Linux Distribution !!------------------ Gentoo Base System release 2.0.1 !!DMI Information !!--------------- Manufacturer: Product Name: !!Kernel Information !!------------------ Kernel release: 2.6.34-gentoo-r6 Operating System: GNU/Linux Architecture: i686 Processor: AMD Athlon(tm) XP 2500 SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.22.1 Library version: 1.0.23 Utilities version: 1.0.23 !!Loaded ALSA modules !!------------------- !!Sound Servers on this system !!---------------------------- No sound servers found. !!Soundcards recognised by ALSA !!----------------------------- 0 [nForce2 ]: NFORCE - NVidia nForce2 NVidia nForce2 with ALC655 at irq 5 !!PCI Soundcards installed in the system !!-------------------------------------- 00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:06.0 0401: 10de:006a (rev a1) Subsystem: 1695:1008 !!Loaded sound module options !!-------------------------- !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Realtek ALC655 rev 0 PCI Subsys Vendor: 0x1695 PCI Subsys Device: 0x1008 Flags: 0 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0xffff Subsys. ID : 0xffff Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=2 LDAC SDAC CDAC DSA=0 SPDIF Extended status : SPCV LDAC SDAC CDAC SPDIF=10/11 SPDIF Control : Consumer PCM Copyright Category=0x22 Generation=1 Rate=48kHz 0:00 = 0000 0:02 = 9f1f 0:04 = 0000 0:06 = 801f 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 9f1f 0:14 = 0000 0:16 = 9f1f 0:18 = 9f1f 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0400 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 09c4 0:2a = 05f0 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 9f80 0:38 = 9f9f 0:3a = 2a20 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0aea 0:6a = 8000 0:6c = 0000 0:6e = 0005 0:70 = 81e0 0:72 = 22e8 0:74 = 8000 0:76 = 0000 0:78 = 0002 0:7a = 2092 0:7c = 414c 0:7e = 4760 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 8 Oct 23 00:49 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 7 Oct 23 00:49 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 6 Oct 23 00:49 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 5 Oct 23 00:49 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 4 Oct 23 00:49 /dev/snd/pcmC0D2p crw-rw---- 1 root audio 116, 3 Oct 23 00:49 /dev/snd/seq crw-rw---- 1 root audio 116, 2 Oct 23 00:49 /dev/snd/timer /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 60 Oct 23 00:49 . drwxr-xr-x 3 root root 200 Oct 23 00:49 .. lrwxrwxrwx 1 root root 12 Oct 23 00:49 pci-0000:00:06.0 -> ../controlC0 !!Aplay/Arecord output !!------------ APLAY aplay: device_list:235: no soundcards found... ARECORD arecord: device_list:235: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [nForce2] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module !!ALSA/HDA dmesg !!------------------ [ 2.361378] intel8x0: clocking to 47476 [ 2.362953] ALSA device list: [ 2.363196] #0: NVidia nForce2 with ALC655 at irq 5