!!################################
!!ALSA Information Script v 0.4.60
!!################################

!!Script ran on: Mon Mar 12 16:22:51 UTC 2012


!!Linux Distribution
!!------------------

Slacko Puppy Linux Linux 2.6.37.6 [i686 arch]


!!DMI Information
!!---------------

Manufacturer:      Hewlett-Packard
Product Name:      HP Compaq 6710b
Product Version:   F.10


!!Kernel Information
!!------------------

Kernel release:    2.6.37.6
Operating System:  GNU/Linux
Architecture:      i686
Processor:         unknown
SMP Enabled:       Yes


!!ALSA Version
!!------------

Driver version:     
Library version:    
Utilities version:  1.0.24.2


!!Loaded ALSA modules
!!-------------------



!!Sound Servers on this system
!!----------------------------

ESound Daemon:
      Installed - Yes (/usr/bin/esd)
      Running - No


!!Soundcards recognised by ALSA
!!-----------------------------



!!PCI Soundcards installed in the system
!!--------------------------------------

00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)


!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!--------------------------------------------------------

00:1b.0 0403: 8086:284b (rev 03)
	Subsystem: 103c:30c0


!!Modprobe options (Sound related)
!!--------------------------------

snd-atiixp-modem: index=-2
snd-intel8x0m: index=-2
snd-via82xx-modem: index=-2
snd-usb-audio: index=-2
snd-usb-caiaq: index=-2
snd-usb-ua101: index=-2
snd-usb-us122l: index=-2
snd-usb-usx2y: index=-2
snd-cmipci: mpu_port=0x330 fm_port=0x388
snd-pcsp: index=-2
snd-usb-audio: index=-2


!!Loaded sound module options
!!--------------------------


!!ALSA Device nodes
!!-----------------



!!ALSA configuration files
!!------------------------

!!User specific config file (~/.asoundrc)

 ctl.equal {
  type equal;
}

pcm.plugequal {
  type equal;
  # Modify the line below if you don't
  # want to use sound card 0.
  #slave.pcm "plughw:0,0";
  # or if you want to use with multiple applications output to dmix
  slave.pcm "plug:dmix"
}

#pcm.equal {
  # Or if you want the equalizer to be your
  # default soundcard uncomment the following
  # line and comment the above line.
pcm.!default {
  type plug;
  slave.pcm plugequal;
}


!!System wide config file (/etc/asound.conf)

defaults.pcm.card 
defaults.pcm.device 


!!Aplay/Arecord output
!!------------

APLAY

aplay: device_list:240: no soundcards found...

ARECORD

arecord: device_list:240: no soundcards found...

!!Amixer output
!!-------------


!!Alsactl output
!!-------------

--startcollapse--
--endcollapse--


!!All Loaded Modules
!!------------------

Module
cpufreq_conservative
acpi_cpufreq
mperf
i915
drm_kms_helper
drm
i2c_algo_bit
i2c_core
iptable_mangle
iptable_nat
nf_nat
ipt_REJECT
nf_conntrack_ftp
nf_conntrack_irc
iptable_filter
xt_state
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
ip_tables
arc4
ecb
b43
ohci_hcd
mac80211
cfg80211
fbcon
tileblit
font
bitblit
softcursor
btusb
bluetooth
serio_raw
pcspkr
tg3
libphy
shpchp
pci_hotplug
snd_page_alloc
intel_agp
intel_gtt
agpgart
hp_wmi
sparse_keymap
rfkill
wmi
fan
battery
container
parport_pc
parport
video
output
thermal
evdev
button
joydev
processor
hp_accel
lis3lv02d
input_polldev
ac
usbhid
usb_storage
fuse
aufs
nls_iso8859_1
nls_cp437
squashfs
ssb
uhci_hcd
ehci_hcd
usbcore
yenta_socket
psmouse


!!ALSA/HDA dmesg
!!------------------

tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
Bluetooth: Core ver 2.15
--
tg3 0000:18:00.0: eth0: Flow control is on for TX and on for RX
retrovol[7216]: segfault at 4 ip b771b45f sp bfb38060 error 4 in libasound.so.2.0.0[b76ee000 c9000]
HDA Intel 0000:00:1b.0: PCI INT A disabled
REISERFS (device sda4): found reiserfs format "3.6" with standard journal
--
REISERFS (device sda4): Using r5 hash to sort names
retrovol[7521]: segfault at 4 ip b76d545f sp bf8b83c0 error 4 in libasound.so.2.0.0[b76a8000 c9000]
retrovol[7563]: segfault at 4 ip b774145f sp bfcb6090 error 4 in libasound.so.2.0.0[b7714000 c9000]
retrovol[7595]: segfault at 4 ip b776245f sp bff7bfc0 error 4 in libasound.so.2.0.0[b7735000 c9000]
tg3 0000:18:00.0: vpd r/w failed.  This is likely a firmware bug on this device.  Contact the card vendor for a firmware update.