!!################################ !!ALSA Information Script v 0.4.56 !!################################ !!Script ran on: Sun May 17 02:21:25 UTC 2009 !!Linux Distribution !!------------------ Ubuntu 9.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 9.04" !!Kernel Information !!------------------ Kernel release: 2.6.28-11-server Operating System: GNU/Linux Architecture: i686 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: 1.0.18rc3 Library version: 1.0.18 Utilities version: 1.0.18 !!Loaded ALSA modules !!------------------- snd_via82xx !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes ESound Daemon: Installed - Yes (/usr/bin/esd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [V8235 ]: VIA8233 - VIA 8235 VIA 8235 with ALC202 at 0xec00, irq 22 !!PCI Soundcards installed in the system !!-------------------------------------- 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) !!Advanced information - PCI Vendor/Device/Susbsystem ID's !!-------------------------------------------------------- 00:11.5 0401: 1106:3059 (rev 50) Subsystem: 1509:9012 !!Modprobe options (Sound related) !!-------------------------------- snd-atiixp-modem: index=-2 snd-intel8x0m: index=-2 snd-via82xx-modem: index=-2 snd-usb-audio: index=-2 snd-usb-us122l: index=-2 snd-usb-usx2y: index=-2 snd-usb-caiaq: index=-2 snd-cmipci: mpu_port=0x330 fm_port=0x388 snd-pcsp: index=-2 !!Loaded sound module options !!-------------------------- !!Module: snd_via82xx ac97_clock : 48000 ac97_quirk : dxs_support : 5 enable : N id : index : -1 joystick : N mpu_port : 0 !!AC97 Codec information !!--------------------------- --startcollapse-- 0-0/0: Realtek ALC202 rev 0 PCI Subsys Vendor: 0x1509 PCI Subsys Device: 0x9012 Capabilities : -headphone out- DAC resolution : 20-bit ADC resolution : 18-bit 3D enhancement : Realtek 3D Stereo Enhancement Current setup Mic gain : 0dB [ 0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Double rate slots: 10/11 Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF DRA VRA Extended status : SPCV SPDIF=3/4 VRA PCM front DAC : 48000Hz PCM ADC : 48000Hz SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz 0:00 = 5990 0:02 = 0505 0:04 = 0b0b 0:06 = 0004 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 831f 0:10 = 9f1f 0:12 = 0606 0:14 = 9f1f 0:16 = 9f1f 0:18 = 0303 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0000 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 0607 0:2a = 0401 0:2c = bb80 0:2e = 0000 0:30 = 0000 0:32 = bb80 0:34 = 0000 0:36 = 0000 0:38 = 0000 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0000 0:66 = 0000 0:68 = 0000 0:6a = 2000 0:6c = cc1b 0:6e = 000d 0:70 = 044c 0:72 = 05a8 0:74 = 0800 0:76 = 0000 0:78 = 0003 0:7a = 8000 0:7c = 414c 0:7e = 4740 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 8 May 13 17:34 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 7 May 13 17:34 /dev/snd/pcmC0D0c crw-rw---- 1 root audio 116, 6 May 13 17:34 /dev/snd/pcmC0D0p crw-rw---- 1 root audio 116, 5 May 13 17:34 /dev/snd/pcmC0D1c crw-rw---- 1 root audio 116, 4 May 13 17:34 /dev/snd/pcmC0D1p crw-rw---- 1 root audio 116, 3 May 13 17:34 /dev/snd/seq crw-rw---- 1 root audio 116, 2 May 13 17:34 /dev/snd/timer !!ALSA configuration files !!------------------------ !!User specific config file (~/.asoundrc) # ALSA library configuration file # Include settings that are under the control of asoundconf(1). # (To disable these settings, comment out this line.) !!asoundconf-generated config file # ALSA library configuration file managed by asoundconf(1). # # MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN! # # Manual changes to the ALSA library configuration should be implemented # by editing the ~/.asoundrc file, not by editing this file. !defaults.pcm.card V8235 defaults.ctl.card V8235 defaults.pcm.device 0 defaults.pcm.subdevice -1 defaults.pcm.nonblock 1 defaults.pcm.ipc_key 5678293 defaults.pcm.ipc_gid audio defaults.pcm.ipc_perm 0660 defaults.pcm.dmix.max_periods 0 defaults.pcm.dmix.rate 48000 defaults.pcm.dmix.format "unchanged" defaults.pcm.dmix.card defaults.pcm.card defaults.pcm.dmix.device defaults.pcm.device defaults.pcm.dsnoop.card defaults.pcm.card defaults.pcm.dsnoop.device defaults.pcm.device defaults.pcm.front.card defaults.pcm.card defaults.pcm.front.device defaults.pcm.device defaults.pcm.rear.card defaults.pcm.card defaults.pcm.rear.device defaults.pcm.device defaults.pcm.center_lfe.card defaults.pcm.card defaults.pcm.center_lfe.device defaults.pcm.device defaults.pcm.side.card defaults.pcm.card defaults.pcm.side.device defaults.pcm.device defaults.pcm.surround40.card defaults.pcm.card defaults.pcm.surround40.device defaults.pcm.device defaults.pcm.surround41.card defaults.pcm.card defaults.pcm.surround41.device defaults.pcm.device defaults.pcm.surround50.card defaults.pcm.card defaults.pcm.surround50.device defaults.pcm.device defaults.pcm.surround51.card defaults.pcm.card defaults.pcm.surround51.device defaults.pcm.device defaults.pcm.surround71.card defaults.pcm.card defaults.pcm.surround71.device defaults.pcm.device defaults.pcm.iec958.card defaults.pcm.card defaults.pcm.iec958.device defaults.pcm.device defaults.pcm.modem.card defaults.pcm.card defaults.pcm.modem.device defaults.pcm.device defaults.pcm.file_format "raw" defaults.pcm.file_truncate true defaults.rawmidi.card 0 defaults.rawmidi.device 0 defaults.rawmidi.subdevice -1 defaults.hwdep.card 0 defaults.hwdep.device 0 defaults.timer.class 2 defaults.timer.sclass 0 defaults.timer.card 0 defaults.timer.device 0 defaults.timer.subdevice 0 defaults.namehint.showall off defaults.namehint.basic on defaults.namehint.extended off pcm.!default { type pulse } ctl.!default { type pulse } !!System wide config file (/etc/asound.conf) pcm.pulse { type pulse } ctl.pulse { type pulse } pcm.!default { type pulse } ctl.!default { type pulse } !!Aplay/Arecord output !!------------ APLAY aplay: device_list:217: no soundcards found... ARECORD arecord: device_list:217: no soundcards found... !!Amixer output !!------------- !!-------Mixer controls for card 0 [V8235] Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control Invalid card number. Usage: amixer [command] Available options: -h,--help this help -c,--card N select the card -D,--device N select the device, default 'default' -d,--debug debug mode -n,--nocheck do not perform range checking -v,--version print version of this program -q,--quiet be quiet -i,--inactive show also inactive controls -a,--abstract L select abstraction level (none or basic) -s,--stdin Read and execute commands from stdin sequentially Available commands: scontrols show all mixer simple controls scontents show contents of all mixer simple controls (default command) sset sID P set contents for one mixer simple control sget sID get contents for one mixer simple control controls show all controls for given card contents show contents of all controls for given card cset cID P set control contents for one control cget cID get control contents for one control !!Alsactl output !!------------- --startcollapse-- --endcollapse-- !!All Loaded Modules !!------------------ Module input_polldev video output lp snd_via82xx gameport snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi arc4 ecb snd_rawmidi snd_seq_midi_event snd_seq ath5k snd_timer i2c_viapro ppdev snd_seq_device mac80211 parport_pc via_ircc psmouse via_agp shpchp snd led_class parport serio_raw pcspkr agpgart irda soundcore cfg80211 crc_ccitt 8139too 8139cp mii floppy fbcon tileblit font bitblit softcursor